Availability
Showing In Stock Items. Show All 18 Items.
OER seat belt anchor bolts are designed to meet or exceed your automobile manufacturer's standards for quality. These bolts are engineered for maximum protection.
( 16 )
$8.99
Summit Racing™ seat belt anchor bolts are designed to meet or exceed your automobile manufacturer's standards for quality. These bolts are engineered for maximum protection. Cut from steel with a yellow zinc or chrome finish, the anchors are available for front and/or rear inner and outer seat belt positions. They're offered for a wide range of vehicles—including many Chevrolet, GMC, Pontiac, Oldsmobile, and Cadillac cars, trucks, and vans from the 1960s and '70s. Replace those often missing or damaged seat belt bolts with our new reproductions.
( 2 )
$6.99
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 140 )
$334.95
—
$849.95
On Sale
Driver and spectator safety is imperative at the track, and QuickTime has the quality parts that you need to protect yourself and others. QuickTime safety shields are designed to offer excellent protection in the event of a flexplate explosion. QuickTime flexplate shields are made from durable powdercoated steel and require no transmission trimming for use. These shields meet nearly every sanctioning body's rules and are SFI 30.1 certified.
( 8 )
$126.95
$82.95
Trackspec Trackday Series bolt-in roll bars are available for a wide range of cars, such as Corvettes, Camaros, and Firebirds. Over the past few years, Trackspec has become the leader in roll cage installations and design. As part of the SPEC Corvette racing series, they were driven to develop the best solutions on the market for rollover safety, starting with their DIY Roll Cage kits. For those not looking for a full roll cage, Trackspec developed the best bolt-in 4-point roll bar on the market for the 1982-92 3rd generation Camaro. Many roll bars on the market mount to the floor, which can be a less-than-ideal mounting solution. The Trackspec solution resolves all of this by mounting the main hoop to a vertically supported shelf near the rear seat buckets. They accomplished this by using advanced technologies to develop a billet machine aluminum plate that distributes the load of the main hoop evenly and across a larger surface area. By doing so, Trackspec achieved a stronger mounting solution and ease of installation. The rear down tubes also mount to a supported portion of the unibody structure. Further, the vertical portion of the rear wheel tubs is tied in to increase mounting strength. Order the roll bars recommended for your vehicle. Additional product details: * Industry-leading main hoop mounting solution using oversized billet machined plates to distribute loads on a vertically supported part of the unibody * Rear kicker bars attach to supported portion of the unibody for a strong and secure mount * Rear bars are detachable using TIG-welded couplers for ease of installation and shipping * Driver and passenger seats maintains full articulation * Meets and exceeds NASA and SCCA time trial 4-point bolt-in requirements * Installs easily with simple hand tools in 2-3 hours * Comes fully powdercoated in standard colors * Retains all plastics and rear seat bottoms * Upper rear seat must be removed * Can be unbolted in minutes if needed * All bars are tucked as high and as tight as possible * Made of 1.75 in. .095 in. mild steel DOM * Includes all mounting hardware
( 1 )
$2,049.99
—
$2,199.99
Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.
( 2 )
$574.95
—
$974.95
Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.
( 4 )
$574.95
—
$974.95
Goodmark offers seat belt anchor bolts for a variety of classic cars from the 1960s and '70s. They're available polished or cadmium coated. Order the hardware recommended for your application—then buckle up and stay safe.
( 7 )
$7.99
Rhodes Race Cars roll cage conversion kits are designed to convert your existing roll bar into a 10, 12 or even 14-point roll cage. RRC conversion kits meet or exceed the NHRA and IHRA requirement for roll cage tubing. These kits include roof tubes, windshield post runners, and dash crossmember. Conversion kits may be available in any of the following materials: * 1-5/8 in. x .134 in. wall mild steel tubing * 1-5/8 in. x .120 in. wall DOM tubing * 1-5/8 in. x .083 in. wall 4130 chromoly tubing Note, because of differing driver sizes and main hoop locations, these kits are not notched!
( 6 )
$294.95
—
$414.95
SafeTBoy 2-point push button buckle lap belts offer safety every time your buckle up. These lap belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-release buckle. SafeTBoy push button buckle belts are CAD-designed and engineered to fit comfortably across your waist. They provide the security and protection you need in your vehicle, while also being FMV-approved.
( 17 )
$48.95
—
$69.50
CA offers seat belt warning push buttons for a variety of applications, including many 1960s and '70s era Chevrolet Corvette models. The buttons are a control for a car's seat belt safety alarm system. Every time you start the car, a warning light stays on until you push the button. These replacements are manufactured from factory materials and specifications to ensure proper fitment and performance. They meet or exceed OEM quality. Spring and retainer are included.
Not Yet Reviewed
$28.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
