Availability
Showing In Stock Items. Show All 86 Items.
On Sale
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 434 )
$61.45
—
$92.25
$55.35
—
$83.05
On Sale
ACCEL performance spark plugs produce a larger spark for more power at high rpms. They improve throttle response and fuel economy and reduce fouling. Their purified Alumina insulator prevents arcing, and their machine-rolled threads protect heads.
( 289 )
$57.49
$51.75
On Sale
Looking for the most aggressive sound in the Flowmaster muffler line? Then take a look at their 40 Series mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case. This improves both horsepower and fuel economy. Best of all, they allow you to hear that cool Flowmaster tone inside of the vehicle, as well as outside. So, if you want more power and less noise, then you've got to get Flowmaster 40 Series mufflers.
( 356 )
$99.95
$89.95
On Sale
MSD Blaster coils give your GM maximum voltage output! With windings and construction similar to MSD's Blaster 2 coils, these have an increased turns ratio, plus lower primary resistance than your stock coils. The Blasters will work with stock GM coil ignition systems, as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your GM ignition system? Just bolt in one of these MSD Blaster Coils.
( 87 )
$78.15
$70.35
On Sale
MSD puts their years of experience to work in making these top-notch iron distributor gears. Their high grade, ductile iron is micro polished for a smooth and scuff-free finish then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these oversized gears for tighter mesh between the camshaft and distributor drive gears.
( 60 )
$59.25
$53.35
On Sale
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 197 )
$61.45
—
$72.69
$55.35
—
$65.45
On Sale
K&N's universal performance air filters are designed and manufactured for a wide variety of applications, including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and more. Many hundreds of models are are available, so regardless of the angle or offset diameter of your air intake, there is likely a K&N universal air filter for your equipment. All filters are constructed with ultra-strong, molded, pliable rubber flanges, which absorb vibration, allow for secure attachment, and can be stretched for up to 1/16 in. (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable. Order the style and size that best suits your needs.
( 310 )
$68.99
—
$78.99
$55.19
—
$63.19
On Sale
ACCEL SuperStock 4000 Series spark plug wire sets will upgrade your OE ignition system for high-spark delivery levels and RFI suppression. They extrude the silicone jacket over a tightly woven, rugged fiberglass braid that meets or exceeds OE specifications. ACCEL offers their SuperStock 4000 Series wire sets in various color schemes to match nearly any application! More product features include: * Jackets rated up to 450 degrees F * 7mm or 8mm yellow, red, black, and blue silicone jackets * Orange and other color-matched spark plug boots with terminals * Available for pre and post-HEI vehicles * Custom-fit, universal, and import
( 134 )
$64.25
—
$84.62
$51.38
—
$71.15
On Sale
Flowmaster Super 10 Series mufflers are intended for those who crave a loud, aggressive exhaust note. They are manufactured from 16-gauge, MIG-welded 409 stainless steel, and feature patented Delta Flow technology for optimum performance. These premium mufflers are offered in various sizes, finishes, and designs, with single or dual inlets and outlets, and are intended only for off-road or race applications.
( 343 )
$99.95
$89.95
On Sale
Mr. Gasket CopperSeal exhaust gaskets are made from .043 in. thick solid copper, and are track-proven to eliminate exhaust leaks in Top Fuel Dragster, Funny Car, and Alcohol class race cars. These gaskets feature an embossed O-ring design to increase sealing pressure around the exhaust ports, creating a tight, leak-proof seal. They're also ideal for tow vehicles and motor homes. CopperSeal gaskets are available in a variety of port styles, as well as more than a dozen size configurations. Order the model designed for precise fitment with your exhaust header.
( 42 )
$68.95
—
$69.29
$62.05
—
$62.35
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 626 )
$83.65
—
$123.95
$68.95
—
$75.25
On Sale
ACCEL HEI in-cap Super Coils provide more high-rpm power and overall performance. Compatible with both original and computer-controlled HEI ignition systems, ACCEL HEI in-cap Super Coils are designed to resist shock and vibration. They have a finned cover that aids cooling, and hardware is included.
( 41 )
$100.95
—
$123.95
$75.95
—
$92.96
On Sale
These automatic transmission oil pans from Mr. Gasket are stock-depth chrome plated pans. They come complete with a washer and gasket and most have drain plugs.
( 91 )
$68.05
—
$87.15
$61.25
—
$78.45
On Sale
Mr. Gasket rear main seal installation tools are special alignment tools that center the front or rear cover when it is installed, allowing an easier way to install the seal (by lightly tapping on the tool with a rubber mallet). The timing cover and rear cover on GM LS series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft--often leading to annoying leaks at the front damper seal and rear main seal. Mr. Gasket durable plastic rear main seal installation tools are your resolve to a leak-free installation.
( 15 )
$75.65
$68.05
On Sale
Mr. Gasket MLS (multi-layered steel) head gaskets are ideal for all engines. Each gasket is made with high-grade materials and manufactured with the latest cutting-edge technology for the tight tolerances that quality engine builders rely on. These MLS gaskets consist of high-grade layers of stainless steel that are tempered to relax stress for proper torque retention. Plus, each multi-layered sheet is layered with a premium polymer coating that's resistant to oxidation and chemicals. Choose Mr. Gasket MLS head gaskets for any engine and any combination.
( 1 )
$111.95
—
$125.05
$61.95
—
$68.95
On Sale
MSD AirForce Manifold LS seal port kits offer the perfect fit and performance. Whether you've misplaced or accidentally damaged your originals, these MSD premium rubber seals will get you back on track to making power!
( 5 )
$85.99
$77.35
On Sale
Mr. Gasket Ultra-Seal gasket sets are made of a cellulose/nitrile material that is less compressible for excellent sealing and durability. This material has an anti-stick coating, plus a silicone bead around each intake port, except where noted, for a tight, leakproof seal. These gaskets are the perfect solution for intake-sealing problems associated with the small sealing areas between ports, and the different expansion rates of intake manifolds and cylinder heads. The choice of champions, these sets come complete with all necessary seals and can be trimmed to fit modified ports where needed.
( 73 )
$56.69
—
$59.35
$51.05
—
$53.45
On Sale
Lakewood combined their experience and the latest technology in drag racing to develop shocks and struts that are superior to all other drag shocks and struts available. They provide the correct weight transfer on the initial launch and then bring the front-end down quickly for aerodynamic purposes. This transfer will result in lower ETs and keep the rear-end loaded for maximum traction.
( 115 )
$105.95
$95.35
On Sale
ACCEL ignition control modules are designed to fit most stock or modified distributors. ACCEL ignition control modules come with solid-state electronics for high-coil output and superior reliability. The dwell control circuit ensures long, consistent coil charging, and the current control circuit protects against coil overheating and resists false triggering from the RFI of high-output coils.
( 45 )
$75.95
$56.96
On Sale
Mr. Gasket MLS (multi-layered steel) header gaskets are designed for extreme cylinder pressures produced by high horsepower, high compression, turbo-charged, supercharged and nitrous equipped engines. MLS header gaskets are manufactured from three stainless steel layers that resist corrosion, will not burn through or push out, and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal excessive exhaust pressure produced from cylinder heads.
( 15 )
$56.69
$51.05
On Sale
Flowmaster FlowFX mufflers feature mandrel-bent bright stainless steel tubing, mated to specially designed straight-through for great sound and maximum performance. FlowFX 409 stainless steel mufflers deliver a moderate to aggressive interior and exterior sound level that will appeal to anyone looking for a deep, powerful exhaust note.
( 395 )
$69.95
$62.95
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 643 )
$71.75
—
$72.49
$64.55
—
$65.25
On Sale
Professional Products Restoration harmonic balancers provide enthusiasts restoring older model vehicles with a cost-effective balancer that is visually and mechanically identical to the original equipment. Each one is finished with a high-grade paint color matching the original equipment balancer, maintaining the look for many years. Dimensions and timing marks are the same, too. Select the one designed for your engine. Note: Even though colors varied from year to year, Restoration balancer colors are a close match to what is generally considered the closest overall paint color accepted as standard for the listed year, make, and model.
( 1 )
$66.99
—
$70.99
$60.29
—
$63.89
On Sale
Mr. Gasket LS timing cover alignment tools allow a safe, easy way to install the seal—by lightly tapping on the tool with soft rubber mallet. These specialized tools are designed to center the front or rear timing cover when it's installed to provide the correct alignment to the centerline of the crankshaft, and to help avoid seal leaks at the front or rear damper cover when installed. Mr. Gasket LS timing cover alignment tools are made of quality material, and are available in styles for use with or without a front seal in the timing cover.
( 16 )
$62.95
$56.65
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
