Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
CHEVROLET C3500 Parts and Accessories
Showing In Stock Items. Show All 909 Items.
Not Showing Customizable Items. View Customizable Items.
Summit Racing™ OE-Style Harmonic Dampers
Summit Racing™ OE-style harmonic dampers are ideal for those mild street rebuilds that don't require the expense of a high-buck race damper. They feature durable nodular construction with bonded elastomer between the inner and outer rings. The balancers also have engraved timing marks, which means no timing tape! Summit dampers are available in a variety of sizes for many engine balance applications. Models are available for hundreds of vehicles; order the OE replacement recommended for your ride.
( 672 )
$71.99
—
$87.99
Melling High-Volume Oil Pumps
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 371 )
$53.99
—
$70.99
Summit Racing™ True Roller Timing Sets
Summit Racing offers True Roller timing sets for a wide range of vehicles from the 1950s and up. These single- or double-roller sets have rugged true-roller chains, teamed with steel crank and cam sprockets. The crank sprockets feature multiple keyways, which allow you to set the cam timing to your choice of degrees in advanced, retarded, or normal. Order the timing set recommended for your year, make, and engine application.
( 184 )
$58.99
—
$71.99
King XP-Series Rod Bearings
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 73 )
$69.99
—
$96.99
Clevite P-Series Main Bearings
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 255 )
$75.99
—
$96.99
On Sale
Belltech Street Performance Shocks
Belltech Street Performance twin-tube shocks set the standard in performance handling for sport trucks. Their low-speed compression characteristics help to control pitch and roll, while their progressive rebound tuning allows you to use large aftermarket wheels and still have a smooth, firm ride. Get the performance and quality that you're looking for when you order the Belltech Street Performance shock models designed for your application. Other features may include (application dependent): * Oversized galvanized steel shock bodies with steel dust covers * Sturdy 35mm valves and 15mm or 18mm piston rods * Available vehicle-specific or adjustable damping tunes * Progressive-rate polymer bump stops
( 510 )
$79.95
$71.96
ACCEL Performance Spark Plugs
ACCEL performance spark plugs produce a larger spark for more power at high rpms. They improve throttle response and fuel economy and reduce fouling. Their purified Alumina insulator prevents arcing, and their machine-rolled threads protect heads.
( 291 )
$58.95
Summit Racing™ Oil Filter Relocation Kits
These Summit Racing™ remote oil filter kits include a bypass adapter, filter mount, 8 ft. of oil hose, barb fittings, stainless steel hose clamps, mounting hardware, and instructions. These kits require a Fram PH8A or equivalent oil filter, which is not included.
( 188 )
$60.99
—
$74.99
Sealed Power Performance Piston Ring Sets
Sealed Power Performance piston rings are made from ductile iron, and compression rings are available with moly, chrome, and plasma-moly facings for extra durability. These OE-quality sets will seal mild- to high-compression engines and help protect against oil blowby. They feature standard ring end gaps for easy installation. Find the bore dimension and ring thicknesses needed for your application.
( 326 )
$50.99
—
$86.99
Hayden Rapid-Cool Transmission Oil Coolers
Hayden Rapid-Cool transmission oil coolers take the heat, so your vehicle won't! Over 14-million transmissions fail every year, and 9 out of 10 are from overheating. Rapid-Cool's unique plate and fin design combines cooling expertise and space efficiency; multiple sizes are available. Their patented internal turbulation provides better heat transfer. Lower your operating temps with a pioneer in cooling: Hayden!
( 166 )
$53.99
—
$62.99
Clevite H-Series Main Bearings
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 143 )
$81.99
—
$97.99
King HP-Series Rod Bearings
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 36 )
$61.99
—
$98.99
Hastings Premium Ductile Ring Sets
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 154 )
$50.99
—
$98.99
Summit Racing™ Race Series 50 Ohm 8.5mm Ignition Wires
Summit Racing brings you our ultimate ignition wire with our 8.5mm 50ohm wire sets. They are made with 100% high tear resistant silicone construction, a 50ohm per foot Wire-Wound FERRITE magnetic suppression core, stainless steel and brass terminals and extreme heat-resistant boots. Only the highest quality raw materials and Made in the USA workmanship, go into every set. The 100% High-Tear resistant silicone jacket protects the inner ferrite core from heat breakdown. The dual silicone layers are bonded together using a tightly woven fiberglass matting that virtually eliminates terminal pull off. Our 50-ohm ferrite core has over 3 FEET of nickel/copper mag winding per INCH! With this tightly wound core, you can be assured that your spark plugs are getting all the power your ignition system can provide. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used on all applications; for superior connection and consistent voltage delivery. High heat silicone and high dielectric strength polymers make up the extreme composition of the spark plug boots. Our boots provide superior radiant heat resistance for longevity and high dielectric strength properties to prevent voltage leakage. With all of these features built into our Race-proven 8.5mm 50-ohm sets, you can be assured that installing one of these sets on your engine will give you all the performance and durability you have come to expect from Summit Racing products.
( 207 )
$82.99
—
$92.99
Hayden Fan Clutches
Do you need a replacement fan clutch? These fan clutches by Hayden Automotive are manufactured to ensure performance and durability. Hayden offers thermal, non-thermal, and heavy-duty series fan clutches that meet strict factory guidelines. All Hayden Automotive fan clutches should only be used on the specific applications for which they are cataloged. Use of the wrong fan clutch may result in poor cooling, excess noise, reduced mileage, and/or fan clutch failure.
( 460 )
$50.99
—
$64.99
Cunningham Machine Door Hinge Rollers
Cunningham Machine offers a variety of door hinge repair components, including these door pin rollers for many Chevy and GMC trucks from the 1980s, '90s, and 2000s. They're designed to replace bent or broken roller pins that have seized up over the years. Simply cut the old ones out and bolt these direct-replacements right back in place. (It's highly recommended to use a door spring tool for ease of installation.) Each kit includes one door pin roller, one washer, and one Grade 8 bolt. Available in sets for one, two, or four doors.
( 7 )
$64.99
On Sale
MSD Street Fire Spark Plug Wire Sets
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 440 )
$89.15
$60.65
—
$81.05
Summit Racing™ Stock Replacement Oil Pans
Some people want a chrome pan, while others want a plain-Jane bare pan. No matter which style you like, Summit Racing™ stock replacement oil pans are perfect stamped steel OEM-style replacements. Most come with a stock baffle, a stock pump location, and a drain plug.
( 992 )
$50.99
—
$81.99
Flex-A-Lite Wide Blade Flex Fans
Flex-A-Lite belt-driven Flex fans feature an aggressive pitch blade design to move the most air at idle. Plus the Flex blades will flatten out at high engine rpm to reduce drag--improving horsepower and gas mileage. Specs for Flex-A-Lite Flex fans: * Stainless steel (6) blades with red stars * Stainless steel (5 or 6) blades with blue stars * Stainless steel blades with gold star (reverse rotation only) * Several diameters to choose from * Mounting pattern: 5/8 in. pilot, 1 3/4 in. to 2 1/2 in. bolt pattern * Projected width of 2 1/4 in.
( 54 )
$91.99
Proforged Billet Aluminum Tie Rod Sleeves
Replace weak-type tie rod sleeves that are prone to failure under performance and racing use with new billet aluminum tie rod sleeves from Proforged. These billet aluminum tie rod sleeves can put the ultimate finishing touch on your front-end rebuild. Featuring machined-out solid 6061-T6 aluminum that's MIL-Spec black anodized, these heavy-duty tie rod sleeves are lightweight and look great. Best of all, Proforged thread-matches their tie rod sleeves to their mating tie rod ends to offer the perfect fit.
( 53 )
$79.95
On Sale
Belltech Rear Shackle Kits
Belltech rear shackle and hanger kits are designed to lower the rear of your vehicle and maintain an OEM-quality ride. They are constructed from heavy-gauge, die-stamped steel to ensure a perfect fit and superior quality. All shackle kits feature a durable powdercoated finish.
( 180 )
$77.00
—
$103.00
$69.30
—
$92.70
King XP-Series Main Bearings
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 47 )
$69.99
—
$88.99
Summit Racing™ Oil Pump Pickups
Our oil pump pickups are specially matched to our Summit Racing™ oil pans. Welded from high quality steel with performance screens, these pickups help keep your motor bathed with a healthy supply of oil. Keep your engine well-oiled for optimal performance with our oil pan pickups.
( 124 )
$65.99
—
$74.99
Summit Racing™ Distributor Cap and Rotor Kits
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 390 )
$57.99
—
$59.99
