Availability
Showing In Stock Items. Show All 28 Items.
Eliminate dry starts with one of these Melling prelube engine oilers, a must-have when building or maintaining an engine. These prelube engine oiler tanks hold fresh oil to prime your whole system, eliminating premature wear due to dry starts. They're compatible with virtually any make/model application. Trust Melling prelube engine oiler tank kits to help your engine start its life right.
( 6 )
$248.99
Summit Bucks
Performance Tool keeps it simple. Their harmonic balancer puller kits give you what you need to easily remove harmonic balancers from a variety of engines. They are made from quality alloy steels and include an assortment of bolts. Additionally, their design helps prevent damage to the pulley and shaft. Regardless of your vehicle type or budget, Performance Tools has the perfect harmonic balancer puller for you.
( 49 )
$45.99
Mr. Gasket LS timing cover alignment tools allow a safe, easy way to install the seal—by lightly tapping on the tool with soft rubber mallet. These specialized tools are designed to center the front or rear timing cover when it's installed to provide the correct alignment to the centerline of the crankshaft, and to help avoid seal leaks at the front or rear damper cover when installed. Mr. Gasket LS timing cover alignment tools are made of quality material, and are available in styles for use with or without a front seal in the timing cover.
( 16 )
$56.69
—
$62.95
These SPC Performance truck/SUV ball joint presses are designed to remove old, worn-out ball joints and install new ones. They feature a forcing screw press and adapters that can easily install all press-in style ball joints. The presses include a handy plastic carrying case that is perfect for storing them when not in use.
( 3 )
$206.99
Lisle GM caster camber kits include a cam adjusting holding tool to adjust the upper control arm cams found on Chevy and GMC vehicles. The holding tool surrounds the entire perimeter of each cam to provide a no-slip work area when moving the hard-to-reach and often rusty OEM cams. The 14 1/2 in. 21mm wrench can be conveniently used from the bottom side of vehicle, instead of reaching through the wheel well, which saves technician's time.
Not Yet Reviewed
$76.99
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$636.99
—
$769.99
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 24 )
$15.99
—
$21.99
Centerforce clutch alignment tools are designed to align the flywheel and clutch disc for the trouble-free insertion of the input shaft. They're available for a wide variety of applications.
( 75 )
$7.95
There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.
( 2 )
$174.99
Yukon Gear & Axle setup bearings easily slip on and off the pinion journal to allow for pinion depth adjustment. These setup bearings ensure you have the proper tolerances needed and are a great addition to your toolbox!
( 3 )
$164.99
—
$182.99
These 30mm OTC injector sockets ensure proper fit during nozzle removal and installation. OTC manufactures these sockets with a 3/8 in. square drive and the 7/8 in. hex permits easy access in tight areas.
( 2 )
$66.99
If your spare tire tool kit is missing, replace it ASAP with one of Dorman's spare tire tool kits. The last thing you want is to be stuck on the side of the road unable to service your vehicle's tire. These kits are a cost-efficient and time-saving alternative to purchasing each tool separately. They come with the necessary equipment to remove/install wheels, lug nuts, and a jack tool to raise/lower the spare tire (where applicable). Components are constructed of steel and powdercoated for lasting durability. A carry case is included to safely organize the kit within your vehicle's factory storage compartment. Order the kit designed for your vehicle application.
( 6 )
$64.99
Summit Bucks
Performance Tool clutch line disconnect tools allow the removal of clutch lines from slave cylinders during clutch master cylinder, slave cylinder, or clutch assembly service. They're built from durable steel for a long service life.
( 1 )
$10.99
Dorman offers a broad spectrum of specialty tools for repair and maintenance on your vehicle, including these precision-made clutch alignment tools. These alignment tools properly align the clutch disk between the pressure plate and the flywheel, before pressure plate is bolted down, for trouble-free clutch alignment and installation.
( 5 )
$3.99
OTC hub and bearing housing puller removes stubborn hubs when nothing else will. These hub and bearing housing tools may separate the bearing, but the unique dual pattern design fits both the wheel hub and bearing housing, capable of applying 20 tons of force. These tools are quality-built from steel and have a black oxide finish to offer long-lasting service life. Have a tough job to do? Use the correct tools by OTC to get the job done.
( 1 )
$279.99
Forged from CR-V alloy steel for maximum strength, Sunex Tools axle spanner nut sockets are 6-lug, spanner-type wrenches designed to remove and install the rear-wheel bearing locknuts on various GMC and Chevrolet vehicles. Whether you're a seasoned professional or a casual weekend mechanic, Sunex Tools help you get the job done right!
( 10 )
$37.99
BOLT padlocks are the only padlocks that will open with your ignition key. Now, that's really a breakthrough: one-key technology! They feature a hardened zinc-nickel plated shackle, a solid zinc core, and an automotive-grade cylinder with a patented 6-plate tumbler sidebar to prevent picking and bumping. These padlocks have a rugged, weather-resistant jacket to protect your gear and achieve the ASTM's top corrosion resistance rating. Order the model recommended for your vehicle make.
( 20 )
$29.69
These SPC Performance cam knockout punches are designed for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. They are made from heavy-duty steel and are perfect for pickup trucks and SUVs.
( 1 )
$85.99
Yukon Gear & Axle carrier bearing puller components are part of their top-quality differential tools designed to save you time and money. From retention sleeves and pins, to washers and adapters, these universal parts help to facilitate differential repairs.
Not Yet Reviewed
$52.99
Yukon Gear & Axle differential housing spreader tools are built to work on the Dana 30, 44, 60, 61, 70, and 80 differentials. They are designed to allow you to safely and easily set carrier bearing preload, saving time and money. The tools are made from quality materials and feature full adjustability for simple installation and use.
Not Yet Reviewed
$756.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
