CHEVROLET C3500 Exhaust | Summit Racing

Hedman Street Headers

For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.

4.17 out of 5 stars ( 2507 )

$322.99

—

$903.99

Schoenfeld Headers

We won't go into a song and dance about Schoenfeld headers. They've been on championship-winning cars for a lot of years. Since we carry the whole Schoenfeld line, we can get you any header they make. If you don't see yours listed, please call. Special warning regarding Schoenfeld painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.

4.42 out of 5 stars ( 133 )

$349.99

—

$648.99

Hedman Elite Extreme-Duty Headers

If you think you are tough on your performance parts, but stainless is not in your budget, then Hedman Elite extreme-duty headers may be the right fit for you project. Their heavier duty construction takes the punishment, and their quality design dishes out the power! They feature thick wall 14-gauge mild steel primary tubes with 3/8 in. flanges to prevent warping for a longer lasting, leak-free seal. Hedman Elite extreme-duty headers are available with the matte silver or Black Maxx ceramic coatings that withstand temperatures up to 1,400 degrees F.

4.18 out of 5 stars ( 397 )

$696.99

MagnaFlow Direct-Fit Catalytic Converters

MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.

4.08 out of 5 stars ( 424 )

$272.00

—

$1,154.00

JBA Performance Exhaust Cat4ward Headers

Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.

4.24 out of 5 stars ( 485 )

$529.47

—

$1,045.30

MagnaFlow Universal Catalytic Converters

MagnaFlow universal catalytic converters by Car Sound form the basic building blocks for many applications. The main benefit of universal catalytic converters is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting, and tube-bending equipment that is readily available to most professional installers. They are extremely well made, with features such as: * A ribbed body that minimizes expansion and distortion when the converter heats up. They form a channel that protects the cushioning mat from direct exposure to exhaust gasses, and hold the ceramic catalyst in proper alignment. * A 1/2 in. lap joint where the necks meet the body. The neck does not extend into the converter body, where it could hamper exhaust flow. * Manufactured with separate dies on different sized inlets. Putting larger neck sizes on smaller bodies would reduce the flow of the converter and the quality of the product. * A monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. * Seam-welded close to the converter body for a strong, tight bond. Welding along the edge could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around. * Heavier-gauge stainless steel, tip-to-tip. They do not use inferior mixed weights and materials. * An aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.

4.62 out of 5 stars ( 190 )

$107.10

—

$553.00

Walker Heavy-Duty U-Bolt Clamps

Got an exhaust job? Finish it like a pro with Walker U-bolt clamps. They are manufactured from premium steel for greater strength and durability. They are offered in standard and flat strap styles as well as heavy-duty with or without welded saddles. No matter which style of Walker U-bolt clamps you need, they are all designed for one purpose--to clamp your exhaust together with leak-free performance!

4.81 out of 5 stars ( 101 )

$2.99

—

$4.99

MagnaFlow California Grade CARB Compliant Universal Catalytic Converters

MagnaFlow California Grade CARB Compliant universal catalytic converters help keep the check engine light off. They offer the right fit for a wide array of vehicles thanks to the adaptable universal design (cutting and welding is required). With highly corrosion-resistant, stainless steel construction, you can have confidence in the quality of these catalytic converters. They are designed to meet or exceed California Air Resource Board requirements and have undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states.

3.67 out of 5 stars ( 3 )

$382.23

MagnaFlow California Universal Fit 30000 Catalytic Converters

MagnaFlow's California Universal Fit 30000 catalytic converters are the first series of a new line of converters designed for vehicles with second-generation On-Board Diagnostic (OBDII) systems. They are designed, tested, and catalogued for specific vehicles. Unlike traditional universal converters, these converters exceed strict California requirements for conversion efficiency and durability.

4.77 out of 5 stars ( 13 )

$201.00

—

$338.00

Walker Direct-Fit Y-Pipes

Walker direct-fit Y-pipes provide a solid merger solution between the manifold and muffler(s). These exhaust components will attach to your vehicle without any modifications. They're manufactured from steel and feature an aluminized coating for protection against corrosion. Choose the Y-pipe size and configuration designed for your specific make and model.

3.97 out of 5 stars ( 214 )

$98.99

Flowmaster 50 Series Big Block Mufflers

Flowmaster 50 series Big Block mufflers have proven to not only significantly improve acceleration and towing power, but to simultaneously increase fuel economy as well. Because of their efficiency, underhood temperatures on trucks and motor homes can be reduced as much as 200 degrees F--helping to lengthen the service life of other engine components. These mufflers are designed and sized for larger gas and diesel engines typically used in towing vehicles and RVs. So, for more comfortable cruising, Flowmaster tuned them for reduced exterior exhaust sound and lower levels of interior resonance.

4.6 out of 5 stars ( 35 )

$306.95

Flowmaster Super 40 Series Delta Flow Mufflers

These Super 40 Flowmaster mufflers significantly outflow the older two-chamber mufflers. They help create even more horsepower with less interior noise and a deeper exterior sound. These mufflers feature a design patterned after Flowmaster's race mufflers. These Flowmaster mufflers far exceed older models on Dyno tests. They create a beautiful hot rod sound, along with increased horsepower and gas mileage. So, if you want to get that hot rod sound and add some horsepower, then these Flowmaster mufflers have you covered.

4.77 out of 5 stars ( 187 )

$152.95

—

$170.95

On Sale

Hooker Super Competition Headers

With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

3.65 out of 5 stars ( 234 )

$1,024.95

—

$1,321.95

Hooker Blackheart Exhaust Systems

At the heart of any performance vehicle is its exhaust system. Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for years. They continue to push the boundaries of performance with their Hooker Blackheart exhaust systems line—part of a platform-designed full exhaust program. These components provide maximum exhaust velocity, ground clearance, style, performance, and quality. Order the configuration tailored for fitment on your specific vehicle. When it's time to tear the heart out of the competition—choose Blackheart! Depending on the application, features may include: * Full stainless steel construction for maximum strength and durability * High-efficiency crossovers and high-flow TIG-welded mufflers * OE-quality hardware (clamps, hanger rods, and rubber isolators) for excellent fitment and leak-free installation * Straight-through, no-muffler design on some systems for maximum flow and the most aggressive sound on or off the throttle * Downpipes available with or without high-flow cats * Quality welds for strength, longevity, and good looks * Utilize factory mounting points for ease of installation * Tube geometry designed for maximum ground clearance and hassle-free installation * Limited lifetime warranty * Dual-mode systems feature high-flow, straight-through, dual-path mufflers with bypass valve, utilizing the factory NPP actuator (mellow throaty tone with closed valve, and aggressive race sound with open valve) * Where applicable, they utilize OE-style AFM valves to prevent "check engine" light and reduce unwanted harmonics in 4-cylinder mode * Some systems feature dual-wall polished tips with laser-etched Hooker Blackheart logo * Some designed for off-highway race use only

4.44 out of 5 stars ( 48 )

$1,177.95

Hooker Competition Manifold Back Exhaust Systems

Hooker manifold-back Competition exhaust systems feature large-diameter, 16-gauge steel tubing for improved efficiency, less backpressure, and longer life. Each system is mandrel-bent to maintain a consistent inside diameter for maximum flow. All systems come without mufflers.

4.05 out of 5 stars ( 39 )

$409.95

Mr. Gasket Starter Heat Shields

These Mr. Gasket starter heat shields are used to protect the starter from the high temperatures put out by exhaust manifolds or headers. They are made from two sheets of aluminum with a heat-resistant material sandwiched in between.

3.52 out of 5 stars ( 21 )

$51.19

JBA Performance Exhaust Y-Pipes

JBA Performance Exhaust Y-pipes are engineered and manufactured to complement JBA's 50-state legal Cat4ward headers. They're made from quality mandrel-bent tubing for good fit and durability. Plus, they're designed for an easy bolt-on installation, so you won't have a hassle getting them mounted. Hardware is included.

3.93 out of 5 stars ( 27 )

$329.96

—

$370.58

Flowtech Catalytic Converter Y-Pipes

Flowtech catalytic converter Y-pipes are ideal for connecting Flowtech headers to the stock catalytic converter equipped exhaust system of your late model vehicle. These high-flow Y-pipes are made from thick steel tubing and are individually designed for specific applications, which cover a diverse group of vehicles.

3.23 out of 5 stars ( 43 )

$283.95

Mr. Gasket Header Installation Kits

These kits from Mr. Gasket are complete header gasket and fastener installation kits. Mr. Gasket was the first to incorporate slotted mounting bolt holes at the ends of each exhaust gasket. This allows the gasket to be installed without removing the header flange entirely from the cylinder head, making installation faster and easier. Premium Ultra-Seal exhaust and collector gaskets provide excellent heat resistance, and conform to and seal minor surface irregularities. Mr. Gasket header and collector bolts provide the proper clamp-load to seal flange mating surfaces. All gaskets and fasteners necessary for header installation are included.

5.0 out of 5 stars ( 4 )

$60.85

BRExhaust Direct-Fit Y-Pipes

BRExhaust direct-fit Y-pipes are engineered to meet OE specs, ensuring performance, reliability, and a precise factory-like fit. Their direct-fit design also allows for easy installation. BRExhaust exhaust pipes feature durable, corrosion-resistant aluminized steel construction and are mandrel-bent to enhance overall exhaust flow performance. Choose the Y-pipe designed for your vehicle.

2.67 out of 5 stars ( 3 )

$128.99

JBA Performance Exhaust Mid-Pipes

JBA mid-pipes are the perfect complement to your JBA headers or JBA exhaust system. These mid-pipes open up the flow on exhaust systems for a dramatic increase in performance and improved sound. They are available for many popular applications as stand-alone upgrades or as additions to existing JBA products. Each set of pipes is application-specific and optimized for your vehicle to get a perfect fit every time. They feature smooth flowing mandrel-bent tubing, heavy-duty flanges, factory-style hangers, and provisions for factory emissions equipment for a simple installation.

4.0 out of 5 stars ( 3 )

$329.96

On Sale

Mr. Gasket HEADLOCK Locking Header Bolts

Burning your hands on headers or the exhaust manifold when bolting them on just became a thing of the past. Mr. Gasket HEADLOCK locking header bolts simplify header installation with high-strength, 2-in-1 self-locking bolts that eliminate the need for lock washers. Designed for the performance engine builder, these innovative, patent-pending fasteners have 24 equally spaced serrations in the face of the hex head. The bolts grab and lock on to your manifold surface, virtually eliminating the chance that one might back out from vibration or because of the varying expansion rates of different metals. Mr. Gasket HEADLOCK locking header bolts are available for numerous domestic applications, including Chevrolet, Chrysler, Ford, AMC, Oldsmobile, and Pontiac. They're manufactured from stainless steel, designed to withstand tensile strengths of 150,000 pounds per square inch, and come with a bright polished finish.

4.63 out of 5 stars ( 48 )

$60.25

Walker Replacement Exhaust Insulators

Walker insulators are high-quality replacements made to work seamlessly with Walker aftermarket replacement parts. These exhaust insulators are manufactured from premium materials and are available in various applications.

4.72 out of 5 stars ( 74 )

$7.99

Dorman Exhaust Manifolds

Dorman exhaust manifolds offer a reliable, direct-fit installation for your vehicle. Manufactured from high-quality materials, they provide the perfect replacements for your worn-out factory piece. Dorman lends a hand in maintaining the exhaust manifold on your daily driver by providing the right fit at the right price--no longer are these "dealer only" parts. Get what you need--think Dorman for your replacement exhaust manifolds.

4.31 out of 5 stars ( 521 )

$90.95

—

$266.95