Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
CHEVROLET C1500 Tools & Shop Equipment
Showing In Stock Items. Show All 30 Items.
Nickky Bobby Exhaust Gasket O-Ring Cutting Tools
Never mess with sharp and problematic exhaust gaskets again! Nickky Bobby exhaust gasket O-ring cutting tools can bring the power of a machine shop into your garage and toolbox. This tool can save the cost of disassembly, shipping, and machine shop labor on your cylinder heads, while getting the major satisfaction of doing it yourself. And after the job is complete, you'll also have a tool in your toolbox arsenal to repeat the job on any LS setup you or your friends or teammates have. What is included in the kit: * Very detailed instructional video with QR code for video link * Billet 6061 cutting fixture inner/outer pieces—cuts a groove that has a 2.25 in. outside diameter/2.00 in. inside diameter * One .125 cutting bit and bit holders * One 10/32 set screw for height adjustment * 10 Viton® high-temp .125 thick O-rings * Patent Pending Important Note: You are in charge of confirming your head surface has adequate space and your port is in the right position without having interference of the O-ring groove. Once you bolt the cutter onto your cylinder head you assume full responsibility and liability. If you follow the mandatory step-by-step instructions correctly, you should be just fine!
Not Yet Reviewed
$324.99
Yukon Gear & Axle Carrier Bearing Pullers
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$636.99
—
$769.99
On Sale
Mr. Gasket LS Timing Cover Alignment Tools
Mr. Gasket LS timing cover alignment tools allow a safe, easy way to install the seal—by lightly tapping on the tool with soft rubber mallet. These specialized tools are designed to center the front or rear timing cover when it's installed to provide the correct alignment to the centerline of the crankshaft, and to help avoid seal leaks at the front or rear damper cover when installed. Mr. Gasket LS timing cover alignment tools are made of quality material, and are available in styles for use with or without a front seal in the timing cover.
( 16 )
$64.55
$58.10
—
$58.15
MotoRad Cooling System Pressure Testers
Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.
( 2 )
$111.99
SPC Performance Truck/SUV Ball Joint Presses
These SPC Performance truck/SUV ball joint presses are designed to remove old, worn-out ball joints and install new ones. They feature a forcing screw press and adapters that can easily install all press-in style ball joints. The presses include a handy plastic carrying case that is perfect for storing them when not in use.
( 3 )
$206.99
RideTech AirPod Covers
RideTech AirPod covers keep your system under cover and your trunk looking good. These heavy-duty covers provide a professional, aesthetic look for your 3 or 5-gallon RideTech AirPod compressor. The covers are easy to install for a clean, sleek appearance.
( 1 )
$155.00
—
$165.00
McGard Spline Drive Lug Nut Sockets
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 25 )
$15.99
—
$22.99
On Sale
RAM Clutch Billet Steel Alignment Tools
RAM billet steel alignment tools are precision-machined for perfect alignment of clutch discs. These specialty tools feature an open backside that allows the clutch pack to be progressively loaded without having to juggle all of the parts when performing the clutch install. Tool models are available to service a variety of pilot and shaft diameters, as well as input spline quantities. This is a must for installing any dual disc clutch unit.
( 55 )
$49.00
$44.10
Centerforce Clutch Alignment Tools
Centerforce clutch alignment tools are designed to align the flywheel and clutch disc for the trouble-free insertion of the input shaft. They're available for a wide variety of applications.
( 76 )
$7.95
Lisle GM Caster Camber Kits
Lisle GM caster camber kits include a cam adjusting holding tool to adjust the upper control arm cams found on Chevy and GMC vehicles. The holding tool surrounds the entire perimeter of each cam to provide a no-slip work area when moving the hard-to-reach and often rusty OEM cams. The 14 1/2 in. 21mm wrench can be conveniently used from the bottom side of vehicle, instead of reaching through the wheel well, which saves technician's time.
Not Yet Reviewed
$81.99
OTC Detroit Diesel Injector Sockets
These 30mm OTC injector sockets ensure proper fit during nozzle removal and installation. OTC manufactures these sockets with a 3/8 in. square drive and the 7/8 in. hex permits easy access in tight areas.
( 2 )
$77.99
Yukon Gear & Axle Setup Bearings
Yukon Gear & Axle setup bearings easily slip on and off the pinion journal to allow for pinion depth adjustment. These setup bearings ensure you have the proper tolerances needed and are a great addition to your toolbox!
( 3 )
$164.99
Performance Tool Hydraulic Clutch Line Disconnect Tools
Performance Tool clutch line disconnect tools allow the removal of clutch lines from slave cylinders during clutch master cylinder, slave cylinder, or clutch assembly service. They're built from durable steel for a long service life.
( 1 )
$9.99
Yukon Gear & Axle Pinion Yoke Holders
There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.
( 2 )
$174.99
ACT Clutch Alignment Tools
Install your ACT clutch kit easier and more accurately with the proper ACT clutch alignment tools. These alignment tools will make quick work of centering the clutch disc and keeping it stationary with the flywheel as you install the pressure plate over it. Make your clutch installation simple and precise using ACT clutch alignment tools.
( 47 )
$4.00
BOLT Padlocks
BOLT padlocks are the only padlocks that will open with your ignition key. Now, that's really a breakthrough: one-key technology! They feature a hardened zinc-nickel plated shackle, a solid zinc core, and an automotive-grade cylinder with a patented 6-plate tumbler sidebar to prevent picking and bumping. These padlocks have a rugged, weather-resistant jacket to protect your gear and achieve the ASTM's top corrosion resistance rating. Order the model recommended for your vehicle make.
( 20 )
$29.69
Dorman Spare Tire Tool Kits
If your spare tire tool kit is missing, replace it ASAP with one of Dorman's spare tire tool kits. The last thing you want is to be stuck on the side of the road unable to service your vehicle's tire. These kits are a cost-efficient and time-saving alternative to purchasing each tool separately. They come with the necessary equipment to remove/install wheels, lug nuts, and a jack tool to raise/lower the spare tire (where applicable). Components are constructed of steel and powdercoated for lasting durability. A carry case is included to safely organize the kit within your vehicle's factory storage compartment. Order the kit designed for your vehicle application.
( 2 )
$49.99
Clearance
Yukon Gear & Axle Differential Carrier Bearings
Yukon Gear & Axle differential carrier bearings are low-cost replacements for Positraction or locker upgrades. They bearings are made of steel and most include races and shims. Order the kit recommended for your axle application.
( 18 )
$194.99
$103.50
Yukon Gear & Axle Differential Carrier Shim Installation Drivers
Yukon Gear & Axle differential carrier shim installation drivers are amazingly self-explanatory. They help you install carrier shims on the differential carrier. The tools include five different size shims, so they can be used on a variety of Ford, GM, Mopar, or AMC differential carriers.
( 4 )
$200.99
OTC Locknut Sockets Sets
OTC sockets are made from high-strength steel and are designed to resist rounding out. Most OTC sockets can be used with a 1/2 in. square drive, extension, and/or torque wrench.
( 2 )
$68.99
OTC Hub and Bearing Housing Pullers
OTC hub and bearing housing puller removes stubborn hubs when nothing else will. These hub and bearing housing tools may separate the bearing, but the unique dual pattern design fits both the wheel hub and bearing housing, capable of applying 20 tons of force. These tools are quality-built from steel and have a black oxide finish to offer long-lasting service life. Have a tough job to do? Use the correct tools by OTC to get the job done.
( 1 )
$279.99
SPC Performance Cam Knockout Punches
These SPC Performance cam knockout punches are designed for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. They are made from heavy-duty steel and are perfect for pickup trucks and SUVs.
( 1 )
$85.99
