Availability
ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers
( 2 )
$5,198.99
RideTech 1973-87 C-10 complete coilover systems will turn your pickup into a true muscle truck. They include everything needed to dramatically improve the handling, ride quality, and stance of your "square fender" pickup. These C-10 coilover kits are 100 percent CAD-engineered in-house and refined on RideTech's exclusive test track. Your C-10 has an excellent frame design with inherently low rocker height and good strength. RideTech complete coilover suspension systems take that great starting point and turn it into a proper muscle truck with high performance handling and sporty stance. Features include: * 4-link kit, 100 percent bolt-on design with minimal cutting and no welding required * C-notch brackets tie in directly with the upper crossmember, while link bar mounts use factory bolt holes in front along with factory axle pad mounting points * Front StrongArm control arms * HQ Series single-adjustable coilover shocks with 24 degrees of rebound adjustment to help you dial-in ride quality and fine-tune handling characteristics * Drop spindles * Front upper coilover mounting brackets * Beefy 1.5 in. MuscleBar sway bar kit * Exclusive 1,000,001-mile shock absorber warranty
Not Yet Reviewed
$7,320.00
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 7 )
$5,128.95
Now is the time to get your pickup truck riding smoothly with a RideTech 1973-87 C-10 air suspension system! These systems include front/rear shocks, front upper/lower StrongArms, drop spindles, a front MuscleBar, and a bolt-on 4-link. Do not let other suspension systems fool you into thinking otherwise--a RideTech air suspension system is the only way to go. These systems are specifically designed for your ride, so there is no worry when it comes to proper fitment or installation.
Not Yet Reviewed
$7,055.00
Detroit Speed SpeedMAX front suspension packages are designed with no compromises and exclusive DSE suspension geometry for superior handing and ride quality at a lowered ride height. These kits are 100 percent bolt-on front suspension systems, based on the later model GMT800 Silverado truck applications. Kits include DSE forged aluminum uprights with modern truck hub pack wheel bearings. These kits can be installed in stock location or 1 in. forward for improved wheel and fender alignment. the DSE "Detroit Tuned" aluminum body coilover shocks and springs allow for ride height adjustment and spring rate tuning without having to disassemble the control arms. Body panels and engine do not need to be removed for installation of these SpeedMAX suspension kits. Additional product details: * Packages are offered with single adjustable, double-adjustable, or non-adjustable shocks (please specify application needed when ordering) * Body panels and engine do not need to be removed for installation * Features "Detroit Tuned" GMT800 rack and pinion steering * Includes sway bar with improved design/rate over optional factory bar using polyurethane bushings and low friction modern aluminum end links (uses tubular upper and lower control arms with Delrin bushings that are designed for trucks) *Features ADI (Austempered Ductile Iron) upper shock bracket that uses a heat-treated, high strength cast iron for fatigue strength and wear resistance * Stainless steel upper control arm cross shafts feature caster tuner bushings
Not Yet Reviewed
$6,425.95
—
$8,318.95
Upgrade your square body Chevy C10's driving feel and performance while getting the perfect stance with QA1's 1973-1987 C10 coilover conversion systems. The kits come with everything you need to convert your C10's front end to coilovers and a tubular crossmember with rack-and-pinion steering. These coilover conversion systems are a great way to overhaul your suspension in one go, giving you adjustable ride height to achieve the perfect stance with up to 8 in. of drop—all while dialing in the ideal ride quality and performance for your application while also reducing weight 140 lbs. over stock. Order the QA1 1973-87 C10 coilover conversion system recommended for your year/make and model vehicle. Product features and details: * Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability * Increased Ground Clearance: The crossmember and control arms make your undercab rails the truck's lowest point—new upper shock mounts increase travel for a great ride and performance, even at low ride heights * Single or double-adjustable shock valving offers independent rebound and compression tunability—great for trucks that will see track time or drivers who really want to dial in ride quality on the street * Easy, Bolt-In Installation: The crossmember comes powder coated and ready to install—no need to cut or weld your frame—it easily locates the steering rack, and you can choose mounts (sold separately) for common engines * Modular Engine Mounts: Choose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft (kits are available for small block Chevy, big block Chevy and LS applications—DIY mounts are also available if you want to customize the location of your engine * Front Sway Bar: The optional front sway bar (sold separately) adds even more cornering capabilities—it reduces body roll and keeps your tires planted to give you more grip in the turns Fitment Notes: * If you already have QA1's coil-over system, you can find retrofit kits to use your existing components * Total drop range depends on wheel/tire fitment * Will require you to trim inner fenders * Engine mounts are year-range specific to maintain OE bellhousing location * Optimized bump steer settings require at least 18 in. wheels -- 18 in. wheels can run up to 6 in. of backspacing -- 20 in. wheels can run up to 7 in. of backspacing * Requires use of 1973-1987 C10 spindles * May require different headers and oil pan (Stock SBC and BBC pans fit) * Steering shaft is not included * May require new power steering hoses depending on fittings, pump, and engine placement
( 1 )
$5,517.95
—
$5,775.95
Detroit Speed QUADRALink rear suspension kits offer 4-link geometry for the best possible handling. These kits are a great way to upgrade from your original leaf spring suspension. They feature Detroit Speed's patented Swivel-Link that allows the suspension to fully articulate with smooth, solid motion and no binding—and it's done without Heim joints! QUADRALink uses tuned high-Durometer rubber bushings, rather than noisy, short-life Heim joints or squeaky urethane bushings. Plus, unlike other kits, these suspensions utilize an adjustable panhard rod that provides precise and effective rear axle lateral location during hard cornering. The long upper links provide great pinion and U-joint angle control, while the rear upper shock crossmember strengthens the rear body and frame section. QUADRALink rear suspension kits are available for a variety of specific vehicle applications; select the model to enhance your ride!
( 1 )
$5,158.95
—
$6,685.95
Enjoy driving your fat-fendered cruiser with the smooth ride and handling of independent suspension. Heidts Superide II independent front suspension kits utilize a Mustang II spindle to allow for a front mount rack and pinion unit, making engine installation much easier. The upper control arms use threaded adjusters for the wheel alignment. Unlike eccentric adjusters, they will never slip or lose alignment when hitting bumps in the road. Dozens of packages are available for applications from 1935 and up. Components include: * Heidts 3-piece crossmember * Mustang II stock spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, front mounted * Billet single adjustable coilover shocks with silver powdercoated springs
( 1 )
$5,420.00
Enjoy driving your fat-fendered cruiser with the smooth ride and handling of independent suspension. Heidts Superide II independent front suspension kits utilize a Mustang II spindle to allow for a front mount rack and pinion unit, making engine installation much easier. The upper control arms use threaded adjusters for the wheel alignment. Unlike eccentric adjusters, they will never slip or lose alignment when hitting bumps in the road. Dozens of packages are available for applications from 1935 and up. Components include: * Heidts 3-piece crossmember * Mustang II stock spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, front mounted * Billet single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$5,420.00
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
Not Yet Reviewed
$5,011.95
Bed Wood and Parts Bed-in-a-Box standard kits include your unfinished wood choice, mild (paintable) steel bed strips, and zinc coated hardware. Offered in dozens of domestic and exotic choices, the wood is ready to accept your favorite finish thanks to Bed Wood's 3-stage sanding process. They are neatly packaged in a single box, eliminating the mishaps and additional costs that often occur with multiple packages. Revitalize your truck bed the easy way with a Bed Wood and Parts Bed-in-a-Box standard kit designed to fit your application!
Not Yet Reviewed
$5,100.00
—
$9,267.50
Bed Wood and Parts Deluxe X kits include your wood choice, polished stainless steel bed strips with matching hardware, plus pre-drilling of the bed-to-frame and perimeter bolt holes. The wood is pre-finished with your choice of Bed Wood's water-based, environmentally friendly formulas in satin or gloss. Both products are specially designed to seal and protect your wood, while accentuating the grain and natural beauty. The exterior wood sealer incorporates biocides, fungicides, and UV protectant to ensure long-lasting protection. Revitalize your truck bed the easy, high-end way with a Bed Wood and Parts Deluxe X kit designed to fit your truck bed!
Not Yet Reviewed
$5,068.00
—
$10,502.50
Bed Wood and Parts Standard X kits include your wood choice, mild (paintable) steel bed strips with zinc coated hardware, plus pre-drilling of the bed-to-frame and perimeter bolt holes. The wood is pre-finished with your choice of Bed Wood's water-based, environmentally friendly formulas in satin or gloss. Both products are specially designed to seal and protect your wood, while accentuating the grain and natural beauty. The exterior wood sealer incorporates biocides, fungicides, and UV protectant to ensure long-lasting protection. Revitalize your truck bed the easy, high-end way with a Bed Wood and Parts Standard X kit designed to fit your truck bed!
Not Yet Reviewed
$5,045.00
—
$10,262.50
Bed Wood and Parts Bed-in-a-Box Deluxe kits include your unfinished wood choice, polished stainless steel bed strips, and matching hardware. Offered in dozens of domestic and exotic choices, the wood is ready to accept your favorite finish thanks to Bed Wood's 3-stage sanding process. They are neatly packaged in a single box, eliminating the mishaps and additional costs that often occur with multiple packages. Revitalize your truck bed the easy way with a Bed Wood and Parts Bed-in-a-Box Deluxe kit designed to fit your application!
( 1 )
$5,032.00
—
$9,507.50
Roadster Shop SPEC chassis kits offer Roadster Shop quality at an affordable price point. The SPEC Series is an engineering-focused approach, using the latest in manufacturing technology, to build the lightest, strongest, and easiest-to-install complete chassis systems. These technologies have been used to streamline procedures resulting in lower cost and shorter lead times. The SPEC independent front suspension is engineered to deliver outstanding performance in a user friendly package. It features proprietary suspension geometry designed to provide the best balance of ride quality and performance in its class. Available as On-The-Shelf, pre-configured chassis or custom specifications to suit your needs. Features and benefits of Roadster Shop SPEC chassis kits include: * Full-chassis performance at a smaller component price * Unparalleled quality * Add the strength of a full frame with no floor modifications on most applications * CNC laser-cut, TIG-welded, and contoured "Laser Rails" frame rails * No kinks, bends, or stressed areas that are prone to flex like mandrel-bent tubing * Stronger, lighter, and more precise * CNC-located factory mounts built into the frame for easy, vehicle specific installation * Frame rails accommodate mini-tubs and wider wheels * Aggressive ride heights for the modern pro-touring look * Choice of coilover or air suspension for many applications * Air suspension chassis will lay the rockers on the ground (varies with tire size) * Truck rear frame rail kick ups engineered for minimal bed modifications while allowing rockers to lie on the ground * Crossmembers and chassis bracing allow 3 in. exhaust * Adjustable, drop-out transmission mounts (tunnel mods may be necessary for larger T-56 and 4L80 transmissions) * Vehicle specific body (cab and bed on trucks), bumper, and core support mounts * Single-adjustable billet coilovers * Power rack and pinion steering * Easy-to-adjust upper A-arm eccentric mounts for fast and accurate alignments * Wilwood Pro Spindles * Parallel 4-bar rear suspension * Ford 9 in. housing with 31 spline axles * Optional mounts, coilovers, sway bars, brake packages, and rear-end gearing available on custom-order chassis * 5 x 4.75 wheel bolt pattern * Frames are shipped as bare steel
( 14 )
$13,763.99
—
$15,470.99
Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options
( 4 )
$5,016.00
—
$13,332.00
Scott's Hot Rods bolt-on IFS packages are the ultimate improvement to the ride quality and handling to your classic ride. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling while adding the convenience and feedback of rack-and-pinion steering. Designed, manufactured and fabricated in-house ensures precise and accurate fitment. Making the conversion process even easier, the bolt-on version of Scott's IFS packages offer simple installation advantages without sacrificing the factory system. Available in a wide array of ride heights, suspension options, brake configurations and even wheel bolt patterns! Features include: * Bolt-on installation for easy conversion * Stock, mild, or low-ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options
Not Yet Reviewed
$5,034.99
—
$13,332.00
BluePrint Engines 50 state legal long blocks are designed and manufactured to factory specs for specified vehicles. They're built using tighter machining tolerances, higher quality components, and finer balancing of the rotating assembly to make them better than the original—while still meeting the description of a "replacement" engine. From Ford Windsors to Chevy big and small blocks, these assembled crate engines are available for a wide range of vehicles spanning a half-century. Select the recommended fitment, specifications, and options needed for your swap.
Not Yet Reviewed
$9,349.00
Scott's Hot Rods 4-bar rear suspension kits have a simple design, but will greatly improve the ride quality and handling of your hot rod or custom. These truly equal length parallel 4-bars use a very long, perpendicular panhard bar to maximize efficiency and reduce lateral movement. Both user-friendly and fully adjustable, the kits also use their CNC-machined and tapped stainless steel rod ends with right-hand or left-hand thread, allowing you to adjust the pinion angle and setup without unbolting the link bars. And unlike a Triangulated 4-link system, the pinon angle does not change throughout the travel of the suspension. The kits are offered with coilovers or airbags. Your rear suspension is just as important as the front to the ride and handling of your car; install a Scott's Hot Rods 4-bar rear suspension kit and increase your driving pleasure. Additional notes and what's included: * CNC-machined 1 1/8 in. x 1/4 in. wall DOM tubing link and panhard bars (adjustable RH- and LH-thread) * Scott's utilize a bar as long as possible per vehicle application to ensure the least amount of lateral movement * CNC-machined stainless steel rod ends--RH- and LH-thread * FK Bearing heim joints--RH- and LH-thread * Aldan American single-adjustable coilovers or Firestone 9000 tapered air springs * Coilovers are the most popular for everyday cruisers * Airbag kits are for those who want to lay their vehicle on the ground * Upper shock crossmember is standard on all kits allowing you to determine final ride height when installing * Rear-end housing brackets * Front frame brackets * 5/8 in. Grade 8 hardware * Lifetime guarantee
( 4 )
$5,016.99
—
$5,114.99
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$10,614.00
Bed Wood RetroLiner systems offer enthusiasts who prefer an all-in-one kit a truly innovative product to deliver yesteryear's classic touch to your late model truck. RetroLiner wood bed liner systems provide American craftsmanship that will boost your truck's looks with beautiful wood only available through Bed Wood and Parts. The systems include your choice of nearly 40 exotic and popular wood species--all kiln-dried and stabilized, precut, properly milled, grooved, 4-stage finish sanded, and delivered ready to finish! Plus, you'll receive cut-to-length polished stainless steel or natural steel bed strips and mounting hardware, mounting pads, a frame, an installation tool, and comprehensive, easy-to-follow instructions. There's no drilling or cutting required and they install without damage to your factory steel bed! Whether you're restoring a pre-war classic, personalizing your truck from the musclecar era, or customizing a newer domestic or import model, you can trust your project to Bed Wood and Parts RetroLiners because, as they say, "Wood looks good!"
Not Yet Reviewed
$5,295.00
—
$10,157.50
Your truck bed is the largest flat surface on the entire truck. Why treat it like the smallest? Utilizing only the highest grade of hardwoods available and the most advanced manufacturing technology, each plank in these undrilled BedWood kits are precision milled with your truck in mind. They come undrilled, allowing you to drill your own holes for custom application or hidden mounting holes. The chamfered edges and proprietary groove, coupled with the ease of installation, results in a finished appearance putting you one step closer to the winners circle. Available in multiple finishes as well as unfinished. Bed strips and hardware sold separately. Choose the model best suited for your truck.
Not Yet Reviewed
$5,100.00
—
$6,995.00
Your truck bed is the largest flat surface on the entire truck. Why treat it like the smallest? Utilizing only the highest grade of hardwoods available and the most advanced manufacturing technology, each plank in these drilled BedWood kits are precision milled with your truck in mind. They come predrilled for bed-to-frame mounting. The chamfered edges and proprietary groove, coupled with the ease of installation, results in a finished appearance putting you one step closer to the winners circle. Available in multiple finishes as well as unfinished. Bed strips and hardware sold separately. Choose the model best suited for your truck.
Not Yet Reviewed
$5,100.00
—
$6,995.00
SCE offers AccuSeal Pro oil pan gaskets for a wide range of vehicles from the 1950s and up. They are available in one or two-piece designs and are made with proprietary processes and materials like steel core laminate, rubber, silicone, PTFE coated, aluminum, and elastomer. The replacement gaskets are engineered to resist heat and seal surface irregularities. Plus, they have built-in crush limiters to prevent damage from over-tightening. For street or strip, order the AccuSeal Pro oil pan gasket recommended for your application.
( 9 )
$5,081.03
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
