Availability
Showing In Stock Items. Show All 386 Items.
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
$898.95
American Autowire Classic Update Series wiring systems power up your classic ride! Modifying your vintage muscle with modern amenities is beyond the capabilities of OE wiring. These harness kits let you keep the retro looks and enjoy power accessories like air conditioning, windows, and fuel injection. The assemblies are year/make/model-specific for a professional fit and are offered in over 60 different kits. Updating your classic has never been easier! Classic Update Series details: * Longer length wire allows for stock or custom routing * ATO-style fuse panel and more circuits * Full color schematics and instructions * Ignition, headlight, and dimmer switches (most kits) * Upgraded 8-gauge wire for alternator, fuse link protection, gauge cluster options, and disconnect * Pre-wired fuse panel mounts in the stock location
( 557 )
$906.30
—
$1,069.70
Instant Rebate
Here's an easy way to convert your stock rear suspension to a coilover suspension. You get everything you need with these QA1 Rear Pro coilover systems, from shocks to nuts and bolts, complete installation instructions, and even decals!
( 104 )
$752.36
—
$998.96
Summit Racing™ frame brace kits are designed to easily install and strengthen the factory frame of your classic car or truck. The benefit of stiffening the frame is improved handling and a tight predictable feel. Reinforce your chassis and create a custom pro touring style, corner carving ride with these Summit Racing™ frame brace kits. *Constructed From DOM tubing *Computer Designed, Machined, and Bent *Welding Required for most kits *Adjustable transmission crossmember for Manuals or overdrives included *Generous openings for Dual Exhaust pipe routing *Exhaust hangers provided
( 68 )
$979.99
Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation
( 8 )
$799.95
Wilwood C10 ProSpindles are designed for custom and competition applications using Wilwood disc brake kits. The ProSpindle kits contain a pair of modular spindles, steering arms, and hub assemblies designed to provide increased strength and braking capacity, along with minimized weight, while incorporating a 2.50 in. lowered stance without affecting steering geometry. Wilwood C10 ProSpindles are constructed from a proprietary grade of forged aluminum. The integrated modular bearing hub assemblies support 5 in. x 4.75 in. and 5 in. x 5 in. bolt patterns, and the ProSpindles provide direct mounting of radial caliper brackets, creating a strong, zero flex platform for brake mounting. Select the kit designed for your vehicle.
( 12 )
$889.34
On Sale
Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.
( 237 )
$837.00
—
$995.00
$753.30
—
$895.50
Instant Rebate
QA1 GM 2.0 Street control arms provide increased positive caster compared to OE arms and are among the lightest available. These arms feature a lower unsprung weight and improved performance without sacrificing durability. Each arm includes a QA1 integrated ball joint design which is stronger than OEM and rebuildable for tunability, providing long-term reliable service. These arms are designed with billet cross shafts for reduced weight and durability for the long haul. Double-sheer lower mounts are coil-over ready for a clean installation. QA1 GM 2.0 Street control arms look incredible and use no unsightly additional adapters! Form meets function with these newly designed arms that look and perform great without requiring painstaking restoring like factory stamped steel control arms.
( 22 )
$769.46
IHC Suspension offers replacement control arms for countless truck applications—including models from Chevrolet, GMC, Ram, and Ford. The steel tubular arms are black powdercoated to resist rust and corrosion. Most of the kits include adjustable control arms to achieve the desired ride height, along with ball joints, polyurethane bushings, and hardware. Order the control arms recommended for your vehicle.
( 6 )
$780.00
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 607 )
$877.00
Are you tired of having brake fade or not enough stopping power? The Right Stuff designed rear disc brake conversion kits give you a complete brake kit without breaking the bank. They manufacture these kits from quality materials to ensure performance and dependability.
( 366 )
$771.60
—
$1,246.50
On Sale
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 24 )
$907.65
—
$1,169.20
$816.88
—
$1,052.28
No gaskets, please! Sanderson headers provide the only leak-free flange design that works! Their patented headers stem from over 50 years of performance. And, like your special project that you've upgraded to be better than the original, Sanderson headers are well-crafted and unique to many types of engines for many types of cars—offering you the best fit for your swapped, modified, and accessorized hot rod. They're crafted from 16-gauge steel with precision, laser-cut, 3/8 in. thick flanges. A weld bead is built up and uniformly ground around exhaust ports and bolt holes to such a precise thickness, all that's needed is a bead of Permatex Ultra Black gasket maker silicone. You'll have no more worries of warped flanges and blown gaskets! Choose the style, finish, and fitment tailored for your vehicle. Sanderson handmade performance headers—for your one-of-a-kind build!
( 289 )
$760.36
—
$866.15
Big torque doesn't have to mean big traction problems. Eaton Posi Performance differentials combine carbon friction discs with precision-forged gears to give you great traction, even under higher torque loads. Plus, the carbon friction discs produce smooth, quiet performance for the life of your vehicle.
( 104 )
$750.99
—
$947.99
On Sale
You have asked, and Baer has answered! Baer is bringing back the original Baer Claw brake system that started it all, with the introduction of their Classic Series disc brake kits. They are direct bolt-ons for early GM, Ford, and Mopar applications. Front kits feature aluminum 2-piston, pad-guided calipers and vented 11 in. rotors, while the rear kits feature cast iron single-piston calipers and solid 10.5 in. rotors for maximum clearance on small wheel applications. You want to modernize your early muscle car, fit stock wheels, have easy access to replacement parts, and not break the bank. Baer Classic Series brake kits are your answer! Features include: * Red powdercoated calipers * Braided brake hoses * Slotted and drilled rotors
( 36 )
$1,049.95
$781.95
—
$943.95
Summit Bucks
Instant Rebate
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 501 )
$789.99
—
$993.99
On Sale
Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings
( 2 )
$1,049.95
Get more for your dollar with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits. You'll get more lift and power for less money with these street performance grinds. They're perfect for those wanting to upgrade to hydraulic roller cams. Howards manufactures their cams using the highest grade race-quality cores and precision-grinds their cams to provide the quality and performance that you want at a reasonable price. They've matched these hydraulic cams with a perfect set of their premium lifters. Overhaul your valvetrain for mild to wild street performance with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits.
( 69 )
$1,034.99
—
$1,039.99
You're installing value without compromising quality with Callies Compstar crankshafts. Finished and inspected by Callies, Compstar cranks maintain proper geometry and design. Hardened with deep nitride, They're ideal for all types of abusive racing environments and available in a wide variety of strokes and journal sizes to fit most common cubic inch requirements. All rod journals are drilled and counterweights are profiled for piston clearance. Sometimes you need to race within a budget, but with Callies' consistent grind and polish, as well as their precise stroke and index, you don't need to compromise on quality. Choose Callies Compstar crankshafts--they're better by design.
( 10 )
$1,051.00
Classic Performance tubular control arms are designed to add up to five degrees of caster in certain applications, while providing full wheel travel. They're manufactured from 1.250 in., 0.120 in. thick wall DOM tubing, with pivot barrels made from 1.500 in., 0.188 in. thick wall DOM tubing to help eliminate distortion. These control arms use bushings made from self-lubricating, non-squeak patented material that will outlast any rubber or polyurethane bushing. The control arms are designed as bolt-in replacements for your factory originals. Classic Performance tubular control arms will tighten up your front suspension and give you that performance ride through the corners and on straight roads. Select the model and options recommended for your vehicle.
( 125 )
$968.99
Speedtech Performance USA frame brace kits prevent the sloppy, unpredictable feel of a weak body frame. You can increase rigidity by linking these braces to the strong structural undersides of your chassis. The braces are constructed from 1.5 in. DOM steel tubing that's computer designed, machined, and CNC-bent for consistent fitment. Speedtech Performance brace kits offer the reinforcement your race chassis demands.
( 10 )
$934.96
On Sale
RideTech HQ coilover kits are designed with handling performance and ride quality in mind. They feature impact-forged aluminum threaded body monotube, gas-pressurized shocks that have been clear anodized for corrosion protection. Other features include: oversized rod guides for maximum strength and durability; Delrin coilover spring washers for easy spring retainer adjustments; stainless steel mounting brackets; and CNC-machined billet hardware. The shocks include Hyperco springs (made with high-tensile premium cold-wound steel) that have a durable powdercoat finish. The unique pinch-clamp height adjusters offer finer threads for easy height adjustment. Order the kit designed for your specific vehicle.
( 14 )
$840.00
—
$1,040.00
$756.00
—
$936.00
On Sale
LEED front disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on and precision-machined.
( 70 )
$824.99
—
$1,139.99
$742.49
—
$1,025.99
Moroso drag race oil pans are available for hundreds of vehicle-specific applications. The sizes and configurations are built for easy installation and optimum performance. Our selection includes a variety of styles, materials, and fluid capacities for drag racing, street and strip, and road race usage. Order the replacement model designed for your ride.
( 58 )
$750.99
—
$1,068.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
