CHEVROLET 7.4L/454 Engines & Components - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Summit Racing™ Hydraulic Lifters

Summit Racing™ hydraulic lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters have a lengthened plunger, designed for less wear and to provide precise oil control through 6,000 rpm.

3.51 out of 5 stars ( 106 )

$122.99

AFR 265cc Oval Port Magnum BBC Cylinder Heads

AFR 265cc Oval Port Magnum BBC cylinder heads are designed to be used on engine displacement up to 468 cu. in. operating at or below 6,200 rpm—providing tons of bottom-end torque, tremendous throttle response, and great all-around power. Recommended for street, strip, or towing applications, these torque monsters can flow 354 cfm at 0.650 in. lift. These units feature a 3/4 in. thick deck, along with reinforced rocker stud bosses, and thick, rugged castings. Want high-flowing power? Then choose these 265cc Oval Port Magnum BBC cylinder heads from AFR. Additional features include: * Intake runners and exhaust ports are partially CNC-machined * Competition 5-angle valve job * 3/8 in. guideplates * A356 aluminum material

4.11 out of 5 stars ( 9 )

$2,907.00

AFR 335cc Enforcer BBC Cylinder Heads

AFR's 335cc BBC Enforcer cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 509 to 540 cu.in. operating below 6,500 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring seats, and AFR's one-piece 8mm 21 4N stainless steel valves. Order the cylinder heads recommended for your year/make and engine application.

4.0 out of 5 stars ( 5 )

$606.00

—

$935.00

On Sale

Holley Mid-Mount Complete Accessory Systems

Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.

4.61 out of 5 stars ( 106 )

$2,049.95

—

$2,202.95

$1,843.95

—

$1,981.95

COMP Cams Thumpr Retrofit Hydraulic Roller Cam and Lifter Kits

Musclecar sound is back and nastier than ever with these Thumpr retrofit hydraulic roller cam and lifter kits from COMP Cams! These cams feature a thumping high performance idle and provide significant horsepower and torque increases. Specially engineered profiles are offered for each unique engine, providing the perfect combination of an early intake valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize your engine's nasty-idling characteristics without negatively impacting streetability. These kits include high-quality matched lifters for unbeatable performance, durability, and ease of installation.

4.65 out of 5 stars ( 23 )

$1,166.95

—

$1,545.95

BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block Crate Engines

BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block crate engines are available in three different models—two with complete front accessory drives. All models deliver 460 hp and 479 lbs.-ft of torque; and feature aluminum heads, hydraulic roller cam, forged crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.250 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint Forged Crankshaft 4.000 in. Stroke, 4.250 in. Bore 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees initial and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Intake Manifold single plane, satin aluminum 750cfm Carburetor Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty * NOTES: This engine is an excellent cruiser and daily driver engine. This engine makes up to 15 in. of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Features External 42.5 oz. imbalance. Recommend GM flywheel 14096987, or TCI flexplate 399973. INCLUDED ONLY WITH MODEL BP454CTCK: * Installed polished complete front accessory drive system with A/C, P/S, WP, all belts and pulleys. INCLUDED ONLY WITH MODEL BP454CTCKB: * Installed black complete front accessory drive system with A/C, P/S, WP, all belts and pulleys.

5.0 out of 5 stars ( 2 )

$10,299.00

BluePrint Engines Pro Series Chevy 454 C.I.D. 563 HP Dressed Long Block Crate Engines

For those wanting maximum horsepower and durability that's pretty much ready to go, BluePrint Engines Pro Series Chevy 454 c.i.d. 563 hp dressed long block crate engines are right for you. In addition, every BluePrint engine is dyno-tested to make sure they hit their target horsepower and torque. Pro Series 454 dressed long blocks feature: * 563 hp, 545 ft.-lb., compression ratio 10.0:1 * BluePrint cast iron block with 4-bolt main --4.250 in. bore --1-piece rear main seal --Mechanical fuel pump provision --Passenger side dipstick --Drilled and tapped for clutch linkage * Forged crankshaft and connecting rods * Forged pistons with rings * Internal front/internal rear balanced rotating assembly * BluePrint aluminum cylinder heads --64cc chamber --2.08 in. intake/1.60 in. exhaust valves --220cc intake/67cc exhaust runners * Hydraulic roller cam --.638 intake/.622 exhaust lift --251 intake/259 exhaust duration @ .050 --114 degree lobe separation * Valve covers, oil pan, and timing cover * Harmonic balancer * MSD Pro billet distributor * 950 cfm carburetor * Aluminum intake manifold

1.0 out of 5 stars ( 1 )

$11,599.00

Summit Racing™ Link Bar Hydraulic Lifters

Summit Racing™ link bar hydraulic lifters are drop-in retrofit lifters designed to allow conversion to street hydraulic roller camshafts. These lifter bodies are machined from cold formed steel with clipped axles. They feature .700 in. diameter wheels and are designed for street use up to 6,500 rpm.

4.26 out of 5 stars ( 19 )

$648.99

BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Long Block Crate Engines

BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Long Block crate engines deliver 460 hp and 479 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, cast crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Stroke, Bored .060 in. over 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint CastCrankshaft 4.000 in. Stroke, 4.250 in. Bore OEM type 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty

5.0 out of 5 stars ( 1 )

$9,399.00

BluePrint Engines GM 496 C.I.D. 600 HP Stroker Dressed Long Block Crate Engines

BluePrint Engines GM 496 c.i.d. 600 hp stroker dressed long block crate engines with aluminum heads provide reliable high-end performance. They are manufactured under strict tolerances and provide outstanding, consistent results. BluePrint Engines GM 496 c.i.d. stroker dressed crate engines are dyno-tested and the results are shipped with engine . Block: * Hand-picked seasoned Chevy 454 big block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed to within .0002 straightness and roundness * Cylinders are sonic-tested for thickness Rotating assembly: * Forged steel crankshaft * OEM-type connecting rods with 150,000 psi rod bolts * Hypereutectic pistons * Hydraulic roller camshaft Additional features: * Aluminum cylinder heads * Valve covers, oil pan, and timing cover * Brass freeze plugs * 30-month/50,000-mile warranty

4.5 out of 5 stars ( 2 )

$10,199.00

Chevrolet Performance ZZ502 C.I.D. Deluxe Long Block Crate Engines

Here, at last, is the king of all big block crate engines from Chevrolet Performance. These 502 cu. in. engines are available unassembled or fully assembled. Each version makes extensive use of aluminum to keep weight down—including aluminum heads, intake, water pump, and valve covers. Additionally, ZZ502 c.i.d. deluxe long block crate engines are full of heavy-duty parts, such as: forged aluminum pistons, forged shot-peened steel connecting rods with 7/16 in. bolts, forged steel crankshaft, 14 in. automatic transmission flexplate, 4-bolt main blocks, stainless steel valves, 6 qt. oil pan, and windage trays. The complete Chevrolet Performance engine kits come with Gen 6 four-bolt main blocks with one-piece rear main seals. Hydraulic roller camshaft specs are: .527 in. intake lift, .544 in. exhaust lift; the duration at .050 in. for intake is 224, and 234 for exhaust with a 112-degree lobe centerline. Other features include a single roller timing chain, aluminum large oval port, and 110cc combustion chambered heads. Intake runner volume is 290cc; stainless steel valves are installed, with 2.25 in. intake side and 1.88 in. on the exhaust side. Valve springs are rated at 140 lbs. closed and 368 lbs. open, good for up to .680 in. lift. These heads have exhaust crossovers. Aluminum high-rise dual-plane square bore bolt pattern intake manifolds and an 870 cfm carburetor are also included.

4.0 out of 5 stars ( 4 )

$14,846.00

COMP Cams Ultra Pro Magnum Rocker Arms

Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.

4.77 out of 5 stars ( 206 )

$46.95

—

$476.95

Melling High-Volume Oil Pumps

Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.

4.63 out of 5 stars ( 364 )

$73.99

—

$125.99

Edelbrock Performer RPM Cylinder Heads

Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.

4.23 out of 5 stars ( 169 )

$780.50

—

$1,558.50

COMP Cams Xtreme Energy Retrofit Cam and Lifter Kits

COMP Cams Xtreme Energy retrofit cam and lifter kits are built to take advantage of the latest cam technology, to provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy kit available for you. By using an aggressive lobe profile, these kits provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.

4.22 out of 5 stars ( 40 )

$1,166.95

—

$1,546.95

Edelbrock Total Power Package 540 HP Big Block Chevy Top-End Engine Kits

Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.

3.78 out of 5 stars ( 18 )

$4,799.95

Jesel 2-Piece Upper Pulley Belt Drive Systems

Jesel 2-piece upper pulley belt drive systems are not just built to survive, they are built to thrive. These often-duplicated, but never-matched Jesel pulley belt drive systems are the most accurate and durable cam timing systems available. They are made with the finest materials and coatings, and then precision CNC-machined to go the distance in any race—and still be ready for more! Infinitely adjustable and track-proven to outlast chain drives, these upper pulley belt drive systems also can reduce the number of harmonics being transferred to the camshaft. Order the Jesel 2-piece upper pulley belt drive system that is designed to fit your needs. 2-piece upper pulley belt drive system features include: * 2024-T6 billet aluminum Spider * Heat-treated steel crank pulley * PTFE coated high-vacuum cam and crank seals * Grade 8 hardware * Patented HTD reinforced belt * Easy, accurate external cam timing adjustment

4.88 out of 5 stars ( 8 )

$1,325.00

—

$1,740.00

Edelbrock Performer RPM 454-O High-Compression Cylinder Heads

Edelbrock Performer RPM 454-O high-compression cylinder heads offer smaller ports for bigger performance. Designed for big block Chevy's with oval ports, these cylinder heads feature unique oval intake ports that flow similar to rectangular ports but the smaller size provides excellent seat-of-the-pants performance plus crisp throttle response! And, the 100cc chamber volume is ideal for your high-compression application. Both the intake and exhaust ports of these Performer RPM heads have been profiled for improved air flow and they have smaller-than-stock valve stems for less weight and excellent flow. More flow, more power, and more performance for your big block application comes with a set of Edelbrock Performer RPM 454-O high-compression cylinder heads.

3.07 out of 5 stars ( 14 )

$1,214.50

—

$1,251.50

Clevite H-Series Rod Bearings

Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.

4.8 out of 5 stars ( 168 )

$12.99

—

$24.99

COMP Cams Ultra Pro Magnum XD Roller Rocker Arms

Built to outlast and outperform in accuracy and strength, Ultra Pro Magnum XD roller rocker arms are engineered from durable 8650 steel and include a machined billet pushrod seat insert for a wide range of super accurate ratios. A unique and wide ratio range to fit almost any popular application from 1.5 to 1.8 in 0.5 in. increments for Chevy and 1.6 to 1.73 for various Ford applications is available. These Ultra Pro Magnum XD rockers are fully rebuildable and boast precision-sorted needle bearings and hardened roller tips. And, they work with most diameter springs and retainers. The XD design utilizes advanced FEA and CAD design and development to improve strength, stiffness and MOI (moment of inertia) optimization for drag and circle track applications.

4.58 out of 5 stars ( 60 )

$55.95

—

$634.95

ARP High Performance Series Cylinder Head Bolt Kits

ARP High Performance Series head bolt kits are tough. They are rated at 180,000 psi--15 percent stronger than Grade 8 fasteners. They come available with a reduced wrenching hex head or 12-point head that help eliminate the need for valvetrain removal when re-torqueing cylinder heads.

4.8 out of 5 stars ( 1058 )

$51.99

—

$187.99

Clearance

WIX Filters Racing Oil Filters

WIX has the lowdown on dirt, and their Racing oil filters are ready to trap more dirt--45 percent more! Your engine needs lots of clean oil to get you across the finish line first, and WIX has spent years of researching the effects of racing on filters, and decades of manufacturing the best, to gain true distinction in all types of racing. These oil filters feature special glass-enhanced media to catch dirt particles without restricting oil flow to your hungry powerhouse. Plus, a strong steel perforated spiral center tube keeps the flow moving and has the highest collapse strength in the industry. WIX Racing oil filters have a heavy-duty can and cover to handle the stress of racing, and some filters include anti-drainback and filter bypass valves. If you're a serious racer, these track-proven filters are your ultimate choice. Guard your engine from power-robbing dirt with WIX Racing oil filters. These filters are designed for racing use only--not for street use.

4.64 out of 5 stars ( 118 )

$15.99

—

$21.99

Howards Cams Street Series Retrofit Hydraulic Roller Lifters

Howards Cams Street series retrofit hydraulic roller lifters are designed for street performance enthusiasts who want to upgrade to a hydraulic roller camshaft. They are manufactured to fit early or late model blocks, including blocks with tall lifter bosses. Howards Cams uses cold form technology to shape their bodies for durability. The lifters are then carbonitrided and tempered for hardness. They also feature hardened and tempered steel alloy roller wheels, heat-treated stainless steel cross bars, and high-alloy steel tie bar buttons. Howards Cams Street series retrofit hydraulic roller lifters are specifically designed for street applications up to 6,500 rpm.

4.07 out of 5 stars ( 91 )

$121.99

—

$646.99

COMP Cams Evolution Series Hydraulic Roller Lifters

COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.

3.86 out of 5 stars ( 14 )

$92.95

—

$726.95