Availability
Cam Motion lifters are available to fit your desired level of performance and budget. From economical stock replacements to their High Performance, Racing, and Premium lines of lifters, Cam Motion covers many applications. Their Premium hydraulic roller lifters feature cold-forged steel construction, precision-ground needle roller bearings and extra-long pistons, precision oil metering, and high-flow, quick-reacting check valves. Cam Motion lifters are available in factory tray/retainer-styles and tie bar-styles.
( 8 )
$766.32
—
$1,052.19
Holley Terminator X engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. Order your Holley EFI Terminator X Service ECU today. Features: * Compatible with Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (Fuel and Oil Pressure Inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories such as: -- Fans, boost control, nitrous control, IAC kit, and more * Boost control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
Not Yet Reviewed
$849.95
On Sale
The 2019-2022 (22.5+ refresh not supported at this time) GM gas trucks have been locked down since their introduction. Owners of these trucks have been waiting patiently for a tuning solution, and DiabloSport has delivered in a big way! The new 8225-R kit includes an industry-leading inTune 3 handheld tuner, along with the locksmith device and harnesses required to unlock both the ECM and TCM in your truck. Once unlocked, the inTune 3 offers up tunes for 87, 91 and 93 octane fuels, as well as two transmission tunes to choose from. Beyond the preloaded tunes, DiabloSport offers a host of user adjustable parameters, like throttle response, speed limit, tire size, and of course, DFM disable! They've even added some new features for drivers of these newer trucks, like the ability to recall your last mode setting, or to retain your auto-start-stop setting. Get power you can feel—with DiabloSport! DiabloSport inTune 3 GM E90/T93 unlock kit features: * ECM and TCM unlock included * Unlock and tune at home * Preloaded tunes for multiple octane levels * Support for 5.3L and 6.2L V8 applications with 6, 8 or 10-speed transmissions * Disable Dynamic Fuel Management for full time V8 operation * Throttle Boost setting for adjustable throttle feel * Adjust speedometer for larger tires (26 – 38 in.) * Calibrate speedometer for gear change (3.42-5.13) * Remove speed limiter for increased top speed * Adjust engine rev limiter for increased RPM range (+/- 400 rpm) * Adjust engine idle speed in Park/Neutral and Drive * New 'Keep Auto Stop Start Setting' allows you to disable the system using the button on the dash—and it stays that way! * New 'Keep Drive Mode Setting' allows you to select a drive mode and it will remember that mode next time you start the truck!
( 1 )
$849.95
$763.95
If you're running a single fan on your Corvette's stock radiator, then it's time to upgrade to DeWitt's aluminum electric dual Spal fan kits. These cooling systems are designed to move a massive amount of air when needed—the fan speed increases as temperatures rise. At the programmed upper threshold temperature, the primary fan speed reaches 100 percent and the secondary fan kicks in to help. As the temperature drops down, the secondary fan cycles off, and the primary slows, giving you a constant cooling temperature. You get uncompromised cooling under all driving conditions.
( 13 )
$1,059.99
RAM Concept 10.5 dual-disc organic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 750. RAM Concept 10.5 dual-disc organic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 6 )
$939.00
Mishimoto performance radiators are designed and engineered to maximize cooling efficiency, boost engine functions, and, most of all, protect your engine from overheating. Many stock radiators can't handle the additional heat that comes higher horsepower levels. So, swap out your stock radiator for an all-aluminum Mishimoto. Key features and benefits of Mishimoto performance radiators include: * Available for universal and exact fit applications (no cutting or modifications required) * All-aluminum construction for optimal heat dissipation, improved strength, and reliability * Increased cooling capacity due to their massive core size * 100 percent brazed aluminum core for minimal distortion, low stress, and clean joints * Available in various sizes with 2-row or 3-row cores * TIG-welded for clean, strong welds and increased durability * Magnetic drain plugs capture metallic debris or fragments * Included high-pressure 1.3 bar cap raises the coolant boiling point for greater safety and efficiency * Automatic transmission and accessory coolers included where applicable
( 334 )
$788.95
—
$987.55
IHC Suspension offers replacement control arms for countless truck applications—including models from Chevrolet, GMC, Ram, and Ford. The steel tubular arms are black powdercoated to resist rust and corrosion. Most of the kits include adjustable control arms to achieve the desired ride height, along with ball joints, polyurethane bushings, and hardware. Order the control arms recommended for your vehicle.
( 7 )
$760.00
Corsa off-road X-pipes upgrade your vehicle with high-quality stainless steel and race car-like sound. They feature mandrel-bent tubing and Corsa RSC technology that delivers a drone-free experience during cruise.
( 3 )
$1,008.99
Halletch Hornet cold air intake kits are designed for the C8 Corvette Stingray Coupe. These direct CAI replacements require no modifications and no tuning. They're dyno-tested for a 17+ increase in horsepower and 25+ increase in torque. Additional product details: * The stainless backplate ensures all harness fasteners and the antenna are attached in their factory locations * You will reuse your stock t/b connector hose, pcv fitting, left and right inlet ducts, and mounting bolts * The huge filter has nearly 1,000 square inches of filtration * Our molded-in velocity stack and reverse flow partition ensures laminar flow at the MAF sensor * Filter box is made from military-grade XLPE * Patent pending * Engineered and designed for the coupe (will not fit the hard top convertible without slight modifications to the cover under the trunk carpet)
( 1 )
$795.00
On Sale
XForce headers look impressive, flow like the mighty Mississippi, and growl out a cadence that makes people stand up and take notice. The unique header design increases power throughout the rev range, while their stainless steel construction guarantees corrosion resistance and a long service life. Choose the style, size, and other options recommended for best performance.
( 30 )
$1,098.00
Designed for street performance machines that see occasional strip use, these Moroso oil pans are modified with deep or kicked-out sumps for increased capacity and oil control under hard acceleration. With a simple bolt-on installation into most production chassis, these Moroso street/strip oil pans are perfect for the weekend warrior.
( 418 )
$974.99
Arnott coil spring conversion kits are expertly designed to replace a vehicle's failing air suspension components with traditional steel springs. All of Arnott's coil springs are constructed from U.S. steel and are designed and tested to provide a great ride along with many years of trouble-free driving. If you have an older vehicle or you're dealing with a multitude of air system issues—order the Arnott coil spring conversion kit designed for your make and model. Items, features, and notes: * Custom valved shock absorbers * Powdercoated coil springs * Most kits available with electronic bypass module (EBM) that eliminates fault codes * Pre-assembled for safe and easy installation * OE fit with no necessary modifications * Not recommended for customers who tow larger trailers or often carry large loads (may cause improper angles for headlight beams)
( 26 )
$904.97
ReadyLift SST lift kits are the perfect solution if you want to add a little lift. They are the first-ever mild lift kits that allow you to use larger wheel and tire combinations, while keeping that smooth OEM ride and drivability. ReadyLift's "Smart Suspension Technology" is used to make these kits very user-friendly to install and they require no cutting.
( 14 )
$751.11
—
$1,049.95
Bilstein B8 6112 suspension kits are for those seeking serious off-road action to carry them over the terrain. Each of their B8 kits will optimize the off-road capabilities of your rig with a 60mm digressive piston for increased damping control, specially designed cold wound springs, and an adjustable spring seat, which allows for vehicle leveling, larger tires, and increased ground clearance. They are a direct bolt-on for many applications and utilize the OEM top mount and spring isolators. Are you searching for the ultimate solution to your off-road adventures? One of these Bilstein B8 6112 front suspension kits will be the definitive answer.
( 11 )
$885.00
Nick Williams Performance drive-by-wire throttle bodies are precision CNC-machined from billet aluminum to meet the demands for increased airflow on the drive-by-wire LSX and LTX performance engines. These throttle bodies require an aftermarket intake to fit the larger diameter throttle blade. They use a 6-pin late model connector that works with late model wiring harnesses. Tuning is required for installation; and the Nick Williams Performance drive-by-wire throttle bodies come complete with stepper motor and electronics installed. There is no need to disassemble your factory throttle body. Order the model designed for your vehicle and engine application.
( 21 )
$899.99
—
$924.99
Aeromotive Phantom direct-fit fuel pumps are drop-in systems engineered for your late model truck. They're available in five pump sizes, from single 340 lph to triple 450 lph. Designed to work with plastic fuel tanks, Phantom Series pumps cover a range of GM truck models spanning decades. The 1999-2004 models used a smaller factory fuel sending unit than the later 2005-17 models. The smaller size unit limits the pump configurations that this tank will accommodate. Aeromotive Phantom direct-fit fuel pump systems are also compatible with different tank depths.
( 2 )
$803.70
—
$1,003.70
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 321 )
$855.99
Why settle for a factory ECU with a cumbersome tuning interface when you can have complete control of your engine, self-learning fuel strategies, and the proven, race-winning technology of Holley EFI at a budget-friendly price? With Holley's Terminator X GM GDI controllers, you can take control of your GM Gen V LT4, LT1, L83, or L86 engine. They feature real-time fuel learn, an integrated 1bar MAP sensor, and four programmable inputs and outputs that are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Whether you're building an LT-swapped budget beater or a boosted racecar, Holley EFI Terminator X GM GDI controllers have the features and technology you need at a price that won't break the bank. Features and notes: * Terminator X comes fully loaded with base maps for common LT engine combinations * 3.5 in. touch screen LCD handheld: -- Easy-to-use calibration wizard -- Tuning and gauge display functions * External gasoline direct injection controller, enables control and tune of factory injectors, GM Gen V LT Variable Valve Timing (VVT), and factory fuel pumps * Holley EFI industry-leading, easy-to-use software suite that allows full laptop access for advanced users * Plug-and-play GM Gen V LT engine GDI and VVT controller--ONLY compatible with Terminator X or X MAX ECUs. Note: To identify if your engine is an early or late application, refer to your fuel pressure sensor, located behind the intake manifold. Early sensors have a 4-pin connector, whereas late sensors have a 3-pin connector. This will help you pick which kit you require for your engine.
Not Yet Reviewed
$999.95
Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.
( 498 )
$835.50
—
$1,051.95
JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.
( 97 )
$931.00
—
$1,082.70
Nitrous Outlet X-Series nitrous oxide systems are the perfect solution for racers on a budget. They're made of the same high-quality parts as other Nitrous Outlet systems, and are available in universal and application-specific kits. Choose your nitrous delivery style, wet or dry, desired horsepower increase, jet sizes, and other options. X-Series nitrous oxide systems include everything you'll need for a clean installation and enhanced performance at the track!
( 26 )
$771.99
—
$887.99
Your big rig is the big boss with the Hellwig Big Wig on board! These American-made sway bars offer your heavyweight hauler, tow vehicle, or truck camper more stability in those heavily loaded conditions--over 20 percent more! Big Wig sway bars provide extra control that comes from Hellwig's larger-diameter design, plus the extra heavy-duty hardware. Together, both provide maximum durability, with the ability to tackle the extra load. Are you putting on weight? Haul big payloads, tow heavy trailers, or add a camper to your bed, but first add a big shot of performance for a more safe, more stable, more confident ride--add Big Wig sway bars from Hellwig.
( 83 )
$798.84
Even if you spend more time on the streets than on the track, aFe Control PFADT Series sway bars will give your suspension the corner-taking confidence of its race-bred brothers. Enjoying a little spirited driving can be a game-changer with the direct-fit installation of these CNC-bent, lightweight tubular alloy steel sway bars. The kits include CNC-machined aluminum brackets, durable welded bar ends, and polyurethane bushings to keep everything in place. You will have increased stiffness, as well as traction control and balance.
( 2 )
$896.00
On Sale
The next generation Edge Evolution CTS3 programmers will continue to include all of the great features, benefits, and extended coverage from the CTS2 product line, while adding a sleek, new exterior and cutting-edge screen. The Evolution CTS3s reprogram your vehicle's stock computer through the OBDII port, saves the factory files to easily return to stock, and then uploads the Edge calibrations. They come with multiple power levels custom tuned by a whole team of engineers, and can be installed in minutes without ever popping the hood. Edge Evolution CTS3 programmers greatly increase horsepower and torque, and not only re-tunes your vehicle, they stay mounted in the cab of the vehicle offering real-time, monitoring of vital engine and vehicle data for a complete gauge package. Edge Evolution CTS3 programmers feature: * Most comprehensive, state-of-the-art, multi-gauge/tuner touch screen display on the market * 3rd generation design is faster and more capable than ever * Power levels designed for daily driving, towing, performance, and extreme * Simple installation just plug into OBDII port--no wiring required * Monitor key vehicle parameters like transmission temperature, boost, rpm, and dozens more * Full color, 5 in. capacitive touch screen with auto-dimming * Offers crystal clear data at your fingertips * Highly customizable gauges and backgrounds * Boot-up directly to gauge screen upon key cycle * Swipe capability allows easy switching between screens as needed for towing, performance, economy, etc. * Built-in performance meter measures 0 to 60, mile times, and more * Advanced integrated data logger with export capability * Ability to add vehicle licenses to tune multiple vehicles with one product * Clear and read DTC codes * Wi-Fi updateable
( 13 )
$899.95
$808.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
