Availability
Remove old cam bearings and install new ones like a professional with our Summit Racing™ cam bearing installation tools. These kits contain an arbor with the drive mount, drive spools, spool stabilizers, and a drive cap. Even if it's your first time installing cam bearings, the instructions will walk you through the process with success.
( 196 )
$81.99
ARP High Performance Series connecting rod bolts are made from seamless and defect-free 8740 chromoly steel. All ARP rod bolts are heat-treated before grinding and thread rolling and have a large underhead radius for greater strength. Guaranteed to pass magnetic inspection testing, these bolts are nearly five times stronger than OEM bolts. They're used in applications ranging from stock replacement to Circle Track, marine, and drag racing engines.
( 259 )
$98.99
McGaughy's offers replacement tie rod ends for hundreds of Chevy and GMC applications from 1999 and up. Worn originals can cause shaky front wheels, misaligned or excessively worn front tires, and imprecise steering. These economical replacements will restore the handling performance you expect. Order the model recommended for your vehicle.
( 19 )
$69.99
—
$82.99
Belltech Street Performance twin-tube shocks set the standard in performance handling for sport trucks. Their low-speed compression characteristics help to control pitch and roll, while their progressive rebound tuning allows you to use large aftermarket wheels and still have a smooth, firm ride. Get the performance and quality that you're looking for when you order the Belltech Street Performance shock models designed for your application. Other features may include (application dependent): * Oversized galvanized steel shock bodies with steel dust covers * Sturdy 35mm valves and 15mm or 18mm piston rods * Available vehicle-specific or adjustable damping tunes * Progressive-rate polymer bump stops
( 505 )
$79.95
Summit Racing™ LS damper pin drill fixtures give you everything you need to drill and pin your harmonic damper on your non-keyed LS or LT engine. They're designed for OEM and similar aftermarket dampers when using belt driven superchargers. Kit includes a heat-treated drill fixture, 4 dowel pins (1/4 in. x 1 in.) and a 1/4 in. cobalt drill bit.
( 12 )
$71.99
Summit Racing™ LS./LT engine lift plates assist you with removal and installation of your engine. Made from 1/4 in. thick steel, our super strong lift plates are specifically designed for the Late Model Gen 3,4,5 LS and LT Series GM engines. These bolt in place of the valley cover and feature three lifting points for balanced engine weight or offset for angling engine with transmission attached. Let us give you a hand in the garage with our Summit Racing™ LS/LT Engine Lift Plates.
( 6 )
$69.99
Summit Bucks
ACDelco spark plug wire sets meet or exceed original equipment specifications for fitment and performance. They're made from top-quality materials, so you know they'll last. The assembled ignition wires are available with different terminal ends and boot ends. Over 700 sets are available to cover virtually any vehicle on the road today. Order the spark plug wires recommended for your application.
( 154 )
$66.99
Featuring a completely new design, Belltech Nitro Drop 2 shocks bring a high performance blend of internal valve technology and state-of-the-art construction to your vehicle. They feature a cavitation-free valve assembly that prevents air from decreasing the shocks' effectiveness. These Belltech Nitro Drop 2 shocks include dust boots and have OEM-style rubber bushings to offer a smooth, comfortable ride.
( 342 )
$65.00
Summit Racing™ Universal LS spark plug wire sets are what you need to move those coils off the valve cover. These kits provide it all, no matter what your build is, where your coils are mounted, or what boots are required for each individual spark plug. Features include: * 5 ft. length plug wires (coil ends pre-assembled with 135 degree boots for the GM LS and Gen V LT Style Coil Packs and 90 degree boots for the IGN-1A or "Smart Coil" Packs) * Spiral core wire, 120 ohm, with 8mm thick jacket * Eight plug wires, eight each of 135 degree, 90 degree, and straight boots, and terminals
( 8 )
$105.99
—
$109.99
Summit Bucks
ACDelco GM Genuine Parts fuel injectors are an electro-magnetic valve that meters fuel into the engine's intake manifold or cylinders for combustion, and is a GM-recommended replacement for your vehicle's original component. The engine management computer operates the injector by applying an electric current to the injector solenoid winding—this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. They are also offered in kits with the necessary parts, such as seals, clamps, and spacer.
( 6 )
$69.99
Sealed Power Performance piston rings are made from ductile iron, and compression rings are available with moly, chrome, and plasma-moly facings for extra durability. These OE-quality sets will seal mild- to high-compression engines and help protect against oil blowby. They feature standard ring end gaps for easy installation. Find the bore dimension and ring thicknesses needed for your application.
( 318 )
$86.99
—
$104.99
Summit Bucks
ACDelco GM Genuine Parts fuel pump control modules regulate the voltage supply to the electric fuel pump. These modules receive an electronic signal from the engine control module that determines the voltage applied to the pump, altering pump motor speed and pressure. These GM Genuine Parts replacements provide the performance, durability, and service life you expect from General Motors. Order the model designed for your application.
( 12 )
$67.99
Improve your ride! McGaughy's shocks respond to changing road conditions for a smooth, comfortable ride. Available in monotube or twin-tube internal designs, these shocks enhance your vehicle's original ride qualities, while increasing road handling and overall stability. Whether your vehicle is stock height, lowered or lifted, you'll find a shock fitment for your application.
( 33 )
$63.99
—
$100.99
Summit Racing™ offers OEM GM flex fuel sensors for a wide range of applications, including many Chevrolet, GMC, Buick, and Cadillac models from 2011 and up. These replacement sensors measure the ethanol/gasoline ratio of the fuel being used—and then send a signal to your ECM so adjustments can be made for optimum operation of your flexible fuel vehicle. The sensors are made from factory materials and specs to ensure proper fit and performance. Ensure the fuel system efficiency you expect; order the model recommended for your vehicle.
Not Yet Reviewed
$79.99
ICT billet LS crankshaft pin drill fixture kits allow you to effortlessly drill and pin your GM LS Series crankshaft and balancer to prevent slip when using a supercharger. Made from high-grade steel, the bits easily drill into the crank and balancer.
( 9 )
$109.99
Summit Bucks
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 26 )
$72.99
Chevrolet Performance has the official parts that your classic vehicle needs to keep it in pristine condition, including these head gaskets, which offer a precision fit between the cylinder head and header to improve exhaust flow. These head gaskets feature durable quality construction to maintain a reliable seal under high pressure and temperature changes. Whether you're installing a new set of heads or are just reinstalling your stock factory manifolds, add Chevrolet Performance head gaskets to ensure a precision fit and a tight, leak-free seal.
( 26 )
$80.99
Top Street Performance premium ignition wires deliver superior performance and durability in various color themes to match your engine bay. Their spiral-wound core suppresses RFI (radio-frequency interference) and features excellent ohm-per-foot resistance. Around the core is a braid that provides superior pull strength, and the outer jacket is composed of premium high-density material with a high-temperature rating and a quality finish to resist damage from water and chemicals. Top Street Performance delivers quality performance with the premium spark plug wire sets designed and styled for your application.
( 5 )
$98.76
ARP studs are professional-quality fasteners for your wheels. They are manufactured from premium-grade, heat-treated 8740 chromoly steel, nominally rated at 190,000 psi tensile strength, and cadmium plated for extra durability. Styles and sizes are available to fit all popular applications; plus, they can easily handle the tremendous acceleration shock loads and lateral forces found in racing applications. ARP wheels studs are must-have replacements for competition vehicles.
( 530 )
$62.99
—
$64.99
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z26 Street Warrior carbon-fiber ceramic brake pads are designed as an upgrade over stock brakes to reduce brake dust and eliminate noise on muscle cars and performance vehicles. These brake pads are made with a low-dust ceramic formula, infused with carbon fiber, to strengthen the compound and provide the extreme stopping power your vehicle deserves. Premium stainless steel hardware, along with ceramic brake lubricant, is included with the Z26 brake pads making it easier to complete your brake job.
( 273 )
$72.25
King MC-Series engine main bearings are available for a wide range of vehicles, including models from Chevrolet, GMC, Ford, Cadillac, Hummer, Isuzu, Pontiac, and Saab. These stock replacements are machined from bi-metal silicon aluminum and sold in sets of 5 or 6, depending on your application. Main bearings hold the crankshaft in place and allow it to rotate within the engine block.
Not Yet Reviewed
$78.99
—
$79.99
ICT Billet motor mount adapters are beautiful engine swap brackets. They are manufactured from aerospace grade billet aluminum, they offer adjustable mounting positions, from stock bellhousing location to 2.25 in. forward. Each kit will include plates and bolts. Mount your swap securely with the strength and style of ICT Billet motor mount adapters.
( 93 )
$72.99
—
$95.99
Pacific Performance Engineering offers automatic transmission fluid bypass valves for a variety of applications. The OEM part has restrictive internal passages; and when the OEM valve fails in the open position, transmission fluid doesn't reach your cooler. This can be caused by mechanical failure or debris. The result of stock valve failure can cause the transmission to dangerously overheat. Without properly cooled transmission fluid, the demands of towing and rigorous stop-and-go driving conditions shorten the life of transmission components. This PPE bypass valve eliminates the mechanical valve—which maximizes fluid flow from the transmission cooler. For further protection, a Neodymium magnet-equipped service plug has been added. The removable plug traps ferrous debris and can be accessed to remove particles from the system. The factory part does not have this feature. Additional notes: * Billet aluminum construction * Neodymium magnet-equipped service plug with O-ring * Easy to install * Limited lifetime warranty
( 16 )
$80.99
Summit Bucks
When you turn the key and your vehicle is slow to turn over—or worse, there's no ignition at all—one of the prime suspects is a faulty starter. Getting the engine up and running for each drive begins with this unit, so it's wise to trust your replacement parts to ACDelco. The aftermarket parts giant manufactures starters to precise OE specifications for perfect fit and performance on virtually any vehicle on the road today. Don't wait until a weak, aging starter fails completely; install an ACDelco product …and turn the key with confidence!
( 207 )
$101.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
