Availability
Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
( 7 )
$1,199.95
On Sale
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$1,294.99
$1,165.49
Kooks Headers Race X-pipes are used primarily for high-rpm performance and race applications. Kooks Headers Race X-pipes are heavy-duty and crack-resistant, featuring large diameter stainless steel construction with smooth-flowing mandrel-bent tubing. Some applications require cutting the factory exhaust system. Note: Kooks Headers Race X-pipes may not be legal for sale, installation, or use in some areas. Check your state and local laws.
( 3 )
$1,516.03
If you're running a single fan on your Corvette's stock radiator, then it's time to upgrade to DeWitt's aluminum electric dual Spal fan kits. These cooling systems are designed to move a massive amount of air when needed—the fan speed increases as temperatures rise. At the programmed upper threshold temperature, the primary fan speed reaches 100 percent and the secondary fan kicks in to help. As the temperature drops down, the secondary fan cycles off, and the primary slows, giving you a constant cooling temperature. You get uncompromised cooling under all driving conditions.
( 13 )
$1,059.99
Chevrolet Performance mechanical fuel pumps are designed to provide adequate flow for your performance engine. Available for both small and big block Chevrolet engines, these Chevrolet Performance mechanical fuel pumps will provide your engine with consistent, reliable fuel pressure.
Not Yet Reviewed
$1,399.99
On Sale
Holley EFI LT1 Gen V Hi-Ram intake manifolds provide the ultimate performance with GM direct-injected Gen V 6.2L LT1 engines. The modular design allows easy disassembly for custom porting, multiple tops, or custom induction systems. Each runner has a large radius where it meets the plenum, and optimized taper and cross-sectional area to perform in a wide variety of engine configurations. When you look for the pinnacle of performance, price, and quality, look to Holley Hi-Ram intake manifolds for your LT1 application. Features include: * Available with injector bosses on the intake runners that provide increased performance potential by using additional injectors and the factory direct injection * Removable top * Large plenum volume * Intakes with injector ports include fuel rails with dual mounting * Fuel rails are anodized, laser-etched, and machined for -8 AN O-ring fittings at each end * Rear of plenum machined for MAP sensor and three vacuum ports * Head flange has clearance for fuel supply to a high-pressure pump * Increased runner wall thickness for custom porting at the plenum to runner entry on each runner * O-ring seals at cylinder heads and plenum top * Easy assembly with top-mounted screws on plenum top (except front two screws) * Several top options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or blank flange for custom throttle bodies * 3,500 to 8,000-plus rpm power band
( 2 )
$1,149.95
—
$1,299.95
$1,033.95
—
$1,168.95
DeWitts direct-fit radiators install in the stock mounting position and use the factory connections without any modifications or adapters. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores contain two rows of cooling tubes, a serpentine fin, and are epoxy-free. These radiators feature press-formed end tanks and are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. They are available with a standard finish or an exclusive black ice epoxy coat for a great OEM look. DeWitts direct-fit radiators can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 5 )
$1,059.99
—
$1,377.99
Corsa off-road X-pipes upgrade your vehicle with high-quality stainless steel and race car-like sound. They feature mandrel-bent tubing and Corsa RSC technology that delivers a drone-free experience during cruise.
( 3 )
$1,008.99
Chevrolet Performance Gen V LT4/LT5 cylinder heads are a great fit for a variety of cars—including select Cadillac CT5 and Chevy Camaro and Corvette models. The aluminum heads are assembled and ready for installation. Product specs: * Complete cylinder head * Intake port style: Gen V LT * Bolt count: 4-bolt * Chamber size: 65cc * Guide material: Powdered metal * Roller style: Hydraulic roller * Casting style: Standard casting
Not Yet Reviewed
$1,105.99
On Sale
XForce headers look impressive, flow like the mighty Mississippi, and growl out a cadence that makes people stand up and take notice. The unique header design increases power throughout the rev range, while their stainless steel construction guarantees corrosion resistance and a long service life. Choose the style, size, and other options recommended for best performance.
( 30 )
$1,098.00
DeWitts Pro-Series direct-fit aluminum radiators provide a 25 percent increase in cooling performance. They include features like two rows of one-inch wide cooling tubes, press-formed end tanks, serpentine fins, and factory-type upper and lower channels—and they're epoxy-free! Each radiator core is assembled and brazed in a state-of-the-art aluminum brazing furnace. DeWitts Direct Fit is the company's official trademark, and it means your radiator will fit without modifications.
( 166 )
$1,165.99
Aeromotive Phantom direct-fit fuel pumps are drop-in systems engineered for your late model truck. They're available in five pump sizes, from single 340 lph to triple 450 lph. Designed to work with plastic fuel tanks, Phantom Series pumps cover a range of GM truck models spanning decades. The 1999-2004 models used a smaller factory fuel sending unit than the later 2005-17 models. The smaller size unit limits the pump configurations that this tank will accommodate. Aeromotive Phantom direct-fit fuel pump systems are also compatible with different tank depths.
( 2 )
$1,003.70
—
$1,439.20
Kooks Headers race long tube headers will deliver high performance to your racer. Their full-length race headers are built from T-304 stainless steel and are available in several primary tube and collector diameters to match your application needs. Optimize scavenging and increase power with top-quality Kooks race long tube headers.
( 64 )
$1,237.30
—
$1,466.24
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,487.50
—
$1,551.25
RAM Concept 10.5 dual-disc metallic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 1,050. RAM Concept 10.5 dual-disc metallic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 1 )
$1,143.99
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 4 )
$1,088.73
—
$1,174.48
Front and rear Fox 2.5 Performance Series shocks are available for a variety of applications—including many Chevrolet, GMC, Jeep, Ford, and Ram trucks from 2015 and up. Featuring Dual Speed Compression (DSC) reservoir adjusters, these gas-charged shocks are a race-winning technology upgrade to improve damping in any terrain. Models are available to fit zero (stock) to 6 in. suspension lifted vehicles. Before any Fox shocks reach production, they've had to stand the test of time and live up to incredible abuse by the fastest athletes in racing. Fox pushes the boundaries to give you that same precise control and race-proven performance you can feel in a bolt-on solution. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency. Additional features: * 2.5 in. impact extruded and CNC-machined 6061-T6 aluminum body resists rust over time * Hard-anodized for a durable finish * Black-anodized, CNC-machined 6061-T6 billet aluminum * 7/8 in. hard-chrome plated steel shafts * Application-specific valving to maximize performance
Not Yet Reviewed
$1,349.95
—
$1,449.95
Belltech coilover kits are designed to replace the factory shocks and coil springs. They include performance shocks with stainless steel construction, coilover springs, a dust boot, and a threaded shock body. Belltech coilover kits offer up to 3 in. of lowering adjustment and increase performance handling.
( 2 )
$1,225.00
Belltech lift kits are precisely engineered. They include custom-designed, front height adjustable, Trail Performance struts and rear Trail Performance twin tube shocks. These lift kits will not only improve your ride quality, but will also retain factory alignment cams and specifications, retain the factory track width--and most importantly, will not induce bump steer! Belltech lift kits also include new control arms, where applicable. They're available for more than a thousand applications from the early 2000s and up; tune up for superior handling, responsiveness, and ride quality with the Belltech lift kit recommended for your vehicle.
Not Yet Reviewed
$1,125.00
FTI Performance SRL-3 Series billet triple clutch torque converters are designed for engines with some serious power! They're engineered to be locked up under full throttle and can withstand some abuse. The billet lockup piston, triple bearings, and anti-ballooning impeller hub are designed to get the job done. These converters are available in different stall torque ratios and stall ratings to match your engine and transmission combination.
( 7 )
$1,429.00
SuspensionMAXX HD stage 1 leveling kits use the highest quality American made components that will ensure your truck stands the test of time. These Stage 1 kits include MAXX Cam 9 patented adjustable torsion bar keys that are manufactured from 4140 investment cast, heat-treated American made Steel! The kits also include CNC aluminum differential spacers and hardened 10.9-grade fasteners to ensure your front drive axles maintain proper driveline angles. Every component down to the shock extensions are precision-machined and zinc coated. Longer shock studs are included to allow you to fasten your factory wire harness in place. In addition, the kits include MAXX travel control arms, designed to give you increased ride height while maintaining proper suspension geometry and travel. If you desire the best kit for your truck or SUV and value quality American made craftsmanship, look no further than SuspensionMAXX for the most complete leveling kits available. Additional features of SuspensionMAXX HD Stage 1 leveling kits: * MAXX travel will allow you to lift your truck up to 3 in. from stock while maintaining a satisfactory ride * Hand-fabricated, TIG-welded control arms from 0.188 wall 1 3/4 in. tubing, with powder-coated finish and utilize greasable MOOG ball joints for trouble-free operation * Included shock extensions ensure shocks are not overextended * The shock extensions reuse your factory length shock absorbers
( 1 )
$1,099.98
Rough Country V2 suspension lift kits offer your vehicle a more commanding presence with a more aggressive stance and a smooth factory-like ride. These suspension kits provide everything needed to lift your vehicle, giving you increased ground clearance to run larger tires while reducing the nose-down factory look. The kits feature Rough Country's V2 monotube shocks delivering incredible ride quality and performance. Choose the lift kit designed for your vehicle. V2 shock features: * Monotube design * Internal floating piston * Nitrogen-charged * 46mm high-flow piston * Fast heat dissipation * 36kN tensile strength * Mounts inverted * T6061 brushed aluminum body * 3-year Manufacturer's Warranty
( 1 )
$1,109.95
—
$1,259.95
Moroso drag race oil pans are available for hundreds of vehicle-specific applications. The sizes and configurations are built for easy installation and optimum performance. Our selection includes a variety of styles, materials, and fluid capacities for drag racing, street and strip, and road race usage. Order the replacement model designed for your ride.
( 58 )
$1,061.99
Performance Design Carbon pTR intake manifolds combine high-quality materials into a flexible and powerful tunnel ram architecture. PA6GF30 glass-reinforced nylon (lower) and 5-layer carbon fiber (upper) shells combine for lightweight, strong, and heat-resistant performance. Offering unique modular velocity stacks enabling 6 1/2 in. to 9 in. runners, multiple accessory port and sensor options along with other custom features, these high-performance manifolds offer easy configuring for a variety of hot rod builds, and can even be reversed on the engine. The plenums feature high-strength carbon fiber with high-temperature epoxy for improved strength-to-weight ratio and reduced heat soak to the fresh air charge. The polymer lower runner pack resists heat soak from the cylinder heads and hides all the ports/sensors in the valley. This combination of materials offers a 10 lbs. weight savings over competitive aluminum tunnel ram manifolds. These custom assemblies are designed for resto-mod, off-road race trucks, race boats, and hot rods where hood clearance is not an issue (they will not fit under late model vehicle hoods). Other product features and specifications include: * Modular velocity stacks for 6.5 in., 8.0 in., and 9.0 in. runner lengths * Raised velocity stack runner entries * Foam-core flange * Anodized billet 105mm forward-facing throttle body flange accepts 90-105mm throttle body * Two MAP sensor locations (front and back) * Two 1/4 in.-NPT ports for PCV, purge solenoid, etc. * One 1/2 in.-NPT port for brake booster or IAT * Tested to over 50 psi of boost * Nitrous nozzle bosses on outboard and valley side of each runner (16 total) * Includes stainless steel hardware for installation * Provisions to run 3 different injector body lengths * Includes molded port, plenum and throttle seals * Optional Carbon pTR ultralight billet -8 AN fuel rails (sold separately) * Optional medium or short velocity stacks (sold separately)
Not Yet Reviewed
$1,499.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
