Availability
FTI Performance is an industry leader in manufacturing transmissions and replacement parts—particularly for racing applications. These bellhousings are where the transmission connects to the engine. They cover the flywheel and the clutch or torque converter. FTI bellhousings are produced from premium materials, engineered to exacting specifications, and available for a variety of transmissions. Order the model recommended for your vehicle.
( 3 )
$319.00
With the largest selection of remanufactured torque converters in the world to fit any transmission, model, or vehicle application, all VEGE remanufactured torque converters are built with parts that are of equal quality or higher quality than OEM (Original Equipment Manufacturer) parts, including VEGE's heavy-duty remanufactured torque converters. You can expect the best with VEGE! Specializing in reliable, yet affordable, sealed torque converters, VEGE torque converters are among the most popular in the industry. Their unique process combines the skillful experience of bench craftsman with the industrial engineering production line. Choose the torque converter model suited to your application needs.
( 10 )
$288.99
Summit Bucks
ACDelco GM Genuine Parts CV axle shafts transfer torque from your vehicle's transmission or differential to its wheels, and are GM-recommended replacements for your vehicle's original components. These shafts have constant velocity (CV) universal joints at each end to allow your wheels and suspension to articulate. The axle shafts have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Order the model recommended for your specific application.
( 12 )
$151.99
—
$288.99
Summit Bucks
ACDelco GM Genuine Parts differential carrier assemblies are the recommended replacements for your Chevrolet, Buick, GMC, or Cadillac vehicle. They are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of your GM vehicle, so you can trust the fit and performance will match that of the original carrier assembly.
( 3 )
$1,327.99
—
$2,990.99
Tilton's 6100-Series hydraulic release bearings feature race-proven Tilton reliability for the street. These hydraulic release bearings have been designed for ease of installation and maximum reliability, at a very competitive price. 6100-Series hydraulic release bearings are designed to mount onto the transmission input shaft bearing retainer, and are compatible with a variety of transmission types.
( 49 )
$382.50
—
$505.75
RAM Concept 10.5 dual-disc organic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 750. RAM Concept 10.5 dual-disc organic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 6 )
$939.00
Spicer Drivetrain Products Life Series U-joints consistently outperform the rest, so you can hit the road or trail with confidence. Cold-forged from high-quality steel, these SPL universal joints feature synthetic thrust washers, multi-lip seals, and the choice of greaseable or non-greaseable. Get the most out of your rig with Spicer Life Series U-joints. Order the replacement model designed to fit your vehicle.
( 113 )
$27.99
—
$34.99
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 38 )
$378.95
$341.05
—
$449.95
Banks Ram-Air differential cover are unlike any others. After testing covers with flat-backs and those with larger fluid capacities, it was apparent that those covers do not cool as well as advertised and suffer from poor fluid dynamics. As a result, flat-backs reduce fuel economy. Banks Ram-Air differential cover extends lubrication life and retains fuel economy! Features: * A380 aircraft aluminum diecast for exceptional strength and precise fit * 12-point chrome plated flanged mounting bolts * 24 external radiator fins offer 534 sq. in. of surface area to ensure optimal heat rejection * Ram-Air system directs cool high-velocity air through radiator fins, eliminating the dead zone * Designed with breakaway scoops * Magnetic fill plug with 20 degree angle for easy fill--simplifies oil changes * Sight-glass with contrast screen and Viton® O-ring seal * Recessed magnetic drain plug simplifies oil changes
( 35 )
$410.00
—
$425.00
Silver Sport front shift kits allow you to move the shifter from the stock rear location to the front at a more bench seat friendly 13.5 in. behind the clutch housing on specific 6-speed transmissions. They feature SST's short throw, billet shift tower with a compact and efficient design and accepts popular 2-bolt style handles. They include detailed instructions to walk you through the conversion.
( 2 )
$399.95
—
$439.95
ICT Billet offers LT LSA swap flexplates for 8-bolt GM crankshafts. They're compatible with Gen 5 LT Series engines and LSA engines. Each kit includes a steel flexplate and eight heavy-duty Grade 12.9 flexplate bolts. These flexplates are also compatible with 10.5 in., 10.75 in., 11.06 in., and 11.5 in. 6-bolt torque converter bolt patterns.
( 1 )
$197.99
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 52 )
$148.99
—
$292.99
Summit Bucks
ACDelco transmission pilot bearings and bushings deliver the quality, durability, and reliability you expect. They facilitate less friction and longer life from the clutch assembly in your ride. These replacements are available in a variety of sizes, styles, and materials. Order the model recommended for your application.
( 40 )
$13.99
If you're building an all-out competition car, then you need a lightweight flywheel that will allow the engine to rev quicker and not eat up a lot of power. RAM billet aluminum flywheels greatly reduce rotating weight to permit quicker revving and higher power output, but still retain enough mass to resist heat distortion that could adversely affect clutch performance. RAM billet aluminum flywheels are made in America and produced in house. All RAM flywheels are computer-balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. SFI-approved, these flywheels are CNC-machined from certified materials and have rugged steel friction-surface inserts. RAM's billet aluminum flywheels feature a 1/4 in. thick friction insert to dissipate heat away without distortion. Technical note: As it spins, a heavy flywheel stores more energy than a lighter one. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. To effectively use a lighter flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Too little gear will cause the engine to 'bog' on launch.
( 31 )
$419.00
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,487.50
—
$1,636.25
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 321 )
$855.99
Pro Series flywheel bolts from ARP give you all that you need to bolt in your flywheel with confidence. They're much stronger than OEM hardware, forged from aerospace alloy, and are heat-treated prior to thread rolling and machining. These bolts feature an exclusive, flat 12-point head design and a larger-than-stock shank diameter for increased strength and improved flywheel register.
( 370 )
$40.99
—
$47.99
Tilton 6000-Series hydraulic throwout bearings feature race-proven reliability for the street! They have been designed for easy installation and maximum reliability at a very competitive price. The bearings feature a stainless steel threaded bearing retainer-mount sleeve that offers nearly 1.25 in. of adjustability, enabling them to be used with most 8.5 to 10.5 in. bent-finger, diaphragm-type clutches. The Tilton 6000-Series hydraulic throwout bearings include a -4AN stainless steel braided line supply line, a bleed line and fittings, a stainless steel threaded adjustment sleeve, and a special bearing retainer bolt.
( 2 )
$454.75
ICT offers a wide array of high-quality aftermarket automotive products to meet your specific needs. When you need the right bolts for your engine or transmission swap, ICT Billet bellhousing bolts will provide the proper, secure attachment for your components. They can also be used to replace stripped or missing original equipment bellhousing bolts.
( 22 )
$19.99
RAM Concept 10.5 dual-disc metallic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 1,050. RAM Concept 10.5 dual-disc metallic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 1 )
$1,279.00
After extreme heat, the next fastest transmission killer is foreign debris. Our Summit Racing™ filter kits come with a fresh filter and pan gasket so that you can protect your transmission against those damaging impurities.
( 69 )
$27.99
Summit Bucks
ACDelco GM Genuine Parts wheel bearing and hub assemblies support the vehicle while allowing the wheel to rotate. They are a GM recommended replacement for your vehicle's original component. These GM Genuine Parts wheel bearing and hub assemblies have been manufactured to provide you with the performance, durability, and service life you expect from General Motors.
( 14 )
$104.99
—
$127.99
Clearance
ATP automatic transmission filter kits include everything you need for a fast, efficient filter change. They include all gaskets, filters, and other components that you might require. These replacement filters are specifically designed for your transmission; therefore, improper fitment is never an issue! Order the kit recommended for your application.
( 110 )
$25.99
—
$36.99
Lakewood bellhousing adapters feature a laser-cut steel flange that has been zinc plated for corrosion resistance. If you are attempting to install a conventional Chevrolet transmission on your 2013+ LT-1 or LT-4 Crate engine or swapping an LS into your First Gen Camaro, but want to retain your Muncie transmission, Lakewood bellhousing adapters will have your drivetrain bolted together in no time! The kits include longer dowel pins, Grade 8 hardware, and a converter pilot bushing for an easy installation. Additional bellhousing adapter features and specs: * Allows you to swap virtually any factory GM V8 Transmission to any GM V8 engine *Adapts GM LS and LT engine bellhousing bolt patterns to conventional SBC/BBC bellhousing bolt pattern * Fits most GM V8 engine blocks * Fits 4L60/80, TH400, TH350, 700R4, 200R4 and Power-glide automatic transmissions * Fits GM Muncie, Saginaw, T-10, and T-5 manual transmissions * Fits most GM aftermarket transmission cases, such as Tremec T-56 and TKO 500/600 transmissions
( 1 )
$349.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
