Availability
Showing In Stock Items. Show All 39 Items.
Seal up those headers with a high-quality gaskets from BTR. Each gasket combines multiple layers of steel and exact sizing to achieve a solid fit with no air leaks on your exhaust system. BTR multi-layer header gaskets are available for wide variety of applications.
( 27 )
$15.99
—
$28.99
Leaks in the exhaust manifold produce bad exhaust valves, a loss of power, and increased fuel consumption. Mahle Original exhaust gaskets require metal beads where the gas passes through at very high temperatures and low pressure. These metal beads are reinforced with metal sheets to resist the component movement that arises from large fluctuations in temperature.
( 14 )
$16.99
Remflex exhaust header gasket sets feature 100 percent flexible graphite construction that's effective up to 3,000 degrees F, far exceeding any vehicle's exhaust system temperature. They will rebound 30 percent when tightened, creating an optimum seal that eliminates the need for re-torquing. The unique Remflex material has been proven for over three decades in industrial applications, where temperatures routinely exceed 2,000 degrees F. They're designed to crush up to 50 percent, filling uneven header flanges for maximum sealing and eliminating the potential for exhaust leaks. Choose the gasket style and dimensions for your specific exhaust headers.
( 840 )
$29.66
—
$31.83
These Chevrolet Performance exhaust manifold gaskets will provide a leak-free seal when installing your exhaust manifolds. Chevrolet Performance exhaust manifold gaskets are made of high-grade materials to reduce the chance of a blowout under high exhaust temperatures or pressure. Choose these Chevrolet Performance exhaust manifold gaskets to get the job done right the first time.
( 8 )
$56.99
Summit Racing™ offers exhaust manifold gaskets in a wide range of sizes and port-style configurations. They feature a quality steel core laminate construction. These replacement seals can repair an exhaust manifold leak—or prevent it from happening in the first place. Order the pair recommended for your engine application.
( 24 )
$14.99
Cometic Gasket's commitment to cutting-edge technology has produced superior-quality gaskets like these Cometic MLS exhaust gaskets. They are constructed from multiple layers of strong stainless steel that has excellent rebound ability and corrosion-resistant characteristics. Outer layers are coated with a heat-resistant, rubber-based material to create a seal that can withstand a variety of sealing and load conditions and surfaces. Cometic MLS exhaust gaskets are ideal for all types of head and block material and their design promotes an even torque load across the sealing surface, allowing for measurably reduced bore distortion.
( 31 )
$39.46
Chevrolet Performance has you covered when it comes to quality seals for your exhaust. These exhaust manifold donut seals are direct replacements for the OE pieces, so you can be assured of proper fit and performance!
( 6 )
$12.99
—
$32.99
Clean, flat surfaces are essential to a good seal. However, that type is surface is rarely available. The best way to seal a warped or uneven exhaust is with SCE Pro Copper embossed exhaust gaskets. These replacements feature an embossed O-ring around the exhaust port to increase sealing pressure for tight, leak-proof performance, even on imperfect surfaces. Whether your ride is a motor home or hot rod, or is used for towing or racing, you'll appreciate the trouble-free seal of SCE Pro Copper embossed exhaust gaskets, available for a wide range of port styles and sizes.
( 102 )
$44.49
—
$45.89
BBK reinforced header gaskets are made from the highest quality materials available. They feature a durable steel wire core to eliminate heat cracking and exhaust leaks, and provide a great seal. They're designed for use with your BBK headers, so you can depend on these gaskets to go the extra mile.
( 42 )
$49.99
Walker exhaust flange gaskets will help you seal up those unwanted exhaust leaks. They're manufactured from a variety of quality materials to ensure a perfect seal. The gaskets are available in a hundreds of styles and configurations to fit your specific application.
( 171 )
$6.99
—
$12.99
Fel-Pro Performance gaskets are an ideal choice for the vast majority of racing and street performance engines. They're available in a broad array of bore sizes, thicknesses, and material options to meet any need for virtually every popular performance engine design. Whether you've got a professional racing engine or a Saturday evening cruiser—Fel-Pro Performance gaskets deliver reliable sealing of combustion pressure, coolant, and oil under the toughest conditions! Order the gaskets designed to fit your application. Product features: * High-density fiber facing material attached to both sides of a perforated steel core * Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets * Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service * Meets or exceeds all original equipment specifications * Application-specific design to ensure a perfect fit
( 496 )
$28.99
Cometic Gasket's commitment to cutting-edge technology has produced superior-quality gaskets like /Trick Flow® by Cometic MLS exhaust gaskets. Constructed from multiple layers of strong stainless steel, these gaskets have excellent rebound ability and corrosion-resistant characteristics. The outer layers are coated with a heat-resistant, rubber-based material to create a seal that can withstand a variety of sealing and load conditions and surfaces. These gaskets are ideal for all types of head and block material and their design promotes an even torque load across the sealing surface, allowing for measurably reduced bore distortion.
( 23 )
$39.99
GPC header gaskets from Flatout Gaskets are made to handle the heat produced by headers. They are made from graphite facing material, which has unique thermal and mechanical properties. Its thermal conductivity is extremely high and actually pulls heat away from the heat source. Its surface characteristics allow for radial "slide" to accommodate expansion and contraction of the joint without damage.
( 8 )
$33.79
—
$35.99
Seal up those unwanted exhaust leaks. The best way to a good seal is with graphite coated steel core exhaust flange gaskets. Summit Racing™ gaskets ensure a tight, accurate seal that has an excellent resistance to corrosion. They are designed for 2 and 3 bolt flange connections and come in a size to suit your application.
( 50 )
$8.99
If you are tired of replacing old, worn-out header gaskets, Patriot Seal-4-Good header gaskets make the perfect solution. Made from multi-layered "dead soft" aluminum or stainless steel, these gaskets conform to your headers for the ultimate seal. They are virtually blowout and burnout-proof and are also totally reusable. In fact, these gaskets are so good, they are likely to be the last header gaskets you'll ever buy—until your next project!
( 15 )
$47.70
Cometic HTS exhaust gaskets are constructed from multiple layers of strong stainless steel that has excellent rebound ability and corrosion-resistant characteristics. Outer layers are coated with a heat-resistant, graphite-based material to create a superior-quality seal that can withstand a variety of sealing and load conditions and surfaces. Rated for 1400 degrees F, these gaskets are perfect for small engine and turbocharged applications. Cometic HTS exhaust gaskets are ideal for all types of head and block material—and their design promotes an even torque load across the sealing surface, allowing for measurably reduced bore distortion. Order the gaskets recommended for your application.
Not Yet Reviewed
$30.44
Remflex collector gaskets feature 100 percent flexible graphite construction that's effective up to 3,000 degrees F, far exceeding any vehicle's exhaust system temperature. The unique material has been proven for over three decades in industrial applications, where temperatures routinely exceed 2,000 degrees F. They are designed to crush up to 50 percent, filling uneven surfaces for maximum sealing and eliminating the potential for exhaust leaks.
( 137 )
$16.79
Patriot header flange gaskets are thick, tear-resistant, and cut to match your Patriot header flanges. Constructed from graphite coated steel core laminate, the gaskets are available in a variety of styles. Order the model recommended for your application.
( 9 )
$18.55
We have put together these Summit Racing™ exhaust gasket and bolts Pro Packs to ensure a leakproof seal for your headers. They feature Fel-Pro Performance exhaust header gaskets made from high-temperature, high-density fiber material around a perforated steel core for durability and heat resistance. To provide a tight seal, we include Stage 8's Grade 8 locking header bolts. They use a patented system that consists of a grooved hex head bolt, a retainer, and a snap clip. The retainer fits over the bolt head and locks the bolt against the header tube, and the snap clip holds the retainer in place. Use one of these Summit Racing™ exhaust gasket and bolts Pro Packs to eliminate blown header gaskets from loose bolts.
( 7 )
$96.33
Hedman header gaskets are made of a special gasket material developed for Hedman. Accept no substitute. Hedman gaskets are available for all header applications. They were made to be exact matches to their headers, ensuring a proper fit and seal. Check with your header installation instructions to get the proper number for your headers.
( 157 )
$15.99
SCE Graph-Form premium header gaskets feature an extra-thick design so they can conform to warped or pitted header and exhaust system sealing surfaces as much as 1/16 in. out of tolerance. Proprietary Graph-Form material outperforms all competing brands for high-temperature sealing. These premium header gaskets are made of an exclusive high-density, super hi-temp graphite—and require only basic port shape similarity. They seal as well as copper, but offer easier fitment. Choose the style and configuration designed for fitment on your vehicle.
( 14 )
$31.74
Summit Bucks
These collector gaskets are made to Dynomax's specifications, so you know they'll fit properly. They are made from a special high temperature-resistant material, so they'll last longer than bargain-bin gaskets. Available in different sizes and styles, Dynomax collector gaskets will help keep your exhaust leak-free.
Not Yet Reviewed
$10.99
JBA Performance Exhaust offers exhaust header gaskets to aid in the fitment of your JBA exhaust product to fix an exhaust manifold gasket leak—or prevent it from happening in the first place. These premium header flange gaskets feature a steel core laminate construction to ensure a good seal and are available in a variety of gasket applications to be an exact port match with JBA Performance Exhaust headers.
( 16 )
$45.60
—
$48.25
JBA Performance Exhaust collector gaskets are designed to help keep your exhaust leak-free. These gaskets are made from carbon fiber material with a metal core to ensure a good seal.
( 5 )
$17.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
