Availability
Showing In Stock Items. Show All 98 Items.
Allstar mechanical fuel pumps will get gas from your tank to your engine efficiently. These lightweight, diecast 3-valve pumps are great for use with sportsman-type engines up to 700 hp and 8,000 rpm. They're equipped with inlet and outlet fittings that make plumbing easy, and the lower section is clockable every 30 degrees to fit most applications. Draw the desired amount of fuel to feed your engine properly with Allstar Performance mechanical fuel pumps.
( 8 )
$59.99
—
$194.99
If you need to install cam bearings in a small block Chevy, then you definitely want Allstar Performance cam bearing installation tools. These tools are must-haves for installing or removing your cam bearings quickly and easily without damage. The tools are crafted with a steel shaft and an aluminum pilot and driver.
( 160 )
$43.99
Allstar Performance Chevy aluminum water necks are designed to fit most Chevy V8 engines, will accept most standard thermostats, and swivel (up to a full 360 degrees, depending on the model) to simplify connection of left- or right-hand radiator hoses to the engine. Their black anodized finish helps protect against corrosion, along with stainless steel hardware and an O-ring for sealing the base to the engine. Get the performance you need and the looks you want with an assist from the Allstar Performance Chevy aluminum water neck best suited for your application.
( 46 )
$17.99
—
$99.99
Allstar Performance high-torque gear reduction mini starters offer several advantages making them popular choices. Besides the added power to turn your engine over easier, they are also smaller, which means less weight and added clearance. Their inline mounting blocks have rotation holes and will fit either 153 or 168-tooth flywheels.
( 15 )
$154.99
—
$179.99
Do you need a GM single wire alternator, but are on kind of a tight budget? Allstar Performance can easily hook you up with one of these completely remanufactured GM Delco single wire alternators. You have a choice of 63 or 80 amp capacity alternators to suit your specific application needs. The housings are made of natural finish aluminum with a gold zinc flashed fan and pulley.
( 13 )
$114.99
Allstar Performance 1:1 ratio pulley kits are lightweight, double-groove aluminum pulleys. They include crank and water pump pulleys and belts for use with Allstar block or head-mount power steering pumps. Order the model recommended for your engine application.
( 14 )
$114.99
Whether you're replacing old mounts or swapping out your engine, Allstar Performance has motor mounts that you can depend on for a secure installation. They are offered for a variety of applications in several styles, from replacements to conversions. These motor mounts are crafted from high-quality materials to ensure a perfect fit and great performance.
( 26 )
$9.99
—
$66.99
Allstar Performance offers Impala spindles for a variety of submodels from the 1970s, '80s, and '90s. These OE replacements feature a 12-degree pin inclination, 2 in. per ft. upper and lower ball joint tapers, and they accept the large GM brake calipers. The forged steel spindles are protected by a durable black powdercoat--and are available separately for the left and right side your classic Impala.
( 2 )
$154.99
Allstar Performance intake manifold bolt kits include Grade 8, 12-point flange clear zinc bolts and stainless steel washers. These kits are designed to fit small block Chevy and Chrysler "A" and "B" engines where clearance is insufficient for standard hex head bolts.
( 12 )
$18.99
Allstar Performance engine mid-plates are designed to keep weight at a minimum without compromising strength or durability. Unique dual mounting holes allow the engine to be raised 1 inch in the chassis. These aluminum mid-plates are 1/4 in. thick and available for a variety of applications.
Not Yet Reviewed
$48.99
—
$139.99
Allstar Performance small block rear main seal adapters can be used to convert 1986 and later blocks with a one-piece rear main seal to accept an older-style, 2-piece seal crankshaft. These are essential when installing an early-style (1985 and earlier) crankshaft into 1986 and later blocks. These rear main seal adapters are available in different applications and can be used with a one-piece or 2-piece oil pan, depending on your application. They are made from billet aluminum and include hardware.
( 8 )
$126.99
—
$188.99
Allstar Performance oil filter adapters are stock replacements designed to fit your engine block and accept an oil filter. These adapters are made with high-quality materials to create a durable product that you can depend on for years to come.
( 115 )
$15.99
—
$54.99
Allstar Performance steel flexplates are available for small block and big block Chevy engines. They also offer SFI-approved models for those needing a replacement flexplate to handle the stress of high rpm. The thicker SFI-approved plates are gold iridite plated and have dual converter bolt patterns with ring gears welded on both sides. Whether you prefer stock or upgraded SFI styles, Allstar flexplates are quality replacements for your racer or street muscle car.
( 11 )
$48.99
—
$69.99
Allstar Performance offers replacement wheel bearings for a variety of popular applications. They're available for front or rear—and for countless hubs. Order the bearing or kit needed to reduce friction and extend wear characteristics on your vehicle.
( 4 )
$28.99
Allstar Performance timing cover gasket sets seal the front of your SBC engine. The gaskets are manufactured from premium materials to provide leak-free performance. The kits are available for fitment on a wide range engine applications from 1955 and up. Sets contain: * Timing cover gasket * Timing cover seal * Distributor gasket * Fuel pump gasket * Fuel pump plate gasket * Thermostat housing gasket * Water pump-to-block gaskets
( 4 )
$10.99
These Allstar Performance cast aluminum valve covers feature two 1 3/8 in. baffled breather tubes on one side and none on the other. They are manufactured from high-quality aluminum and have a polished finish. Their thicker design offers improved gasket sealing and a built-in spreader for secure mounting.
( 10 )
$132.99
—
$169.99
Allstar Performance timing covers are offered in a variety of styles for that finishing touch to your mild street engine. They're manufactured from high-quality cast aluminum, in models for use with short or long water pump applications. Order the cover recommended for your engine.
( 70 )
$37.99
Replace your worn GM metric spindles with new Allstar Performance metric spindles. These are manufactured from forged steel to OEM specifications to give you the durability and fitment you want.
( 9 )
$134.99
—
$159.99
Keep your classic street machine cool with Allstar Performance Chevy aluminum radiators. Whether you have a 1955-56 Chevy 6-cylinder or a 1955-57 V8 with a long or short style water pump, Allstar's choice of lightweight, well-built aluminum radiators will be the perfect fit. Both include built-in automatic transmission coolers with 1/4 in. NPT fittings. Allstar Chevy aluminum radiators provide you with high quality at reasonable prices to get your classic finished right--the first time! Features: * Two rows of 1 in. tubes * Furnace-brazed tanks * Machined billet filler neck with overflow fitting * Drain petcock * Mounting clips
( 12 )
$379.99
Get economy and quality with Allstar Performance power steering kits. These kits have everything that you need, at a price you can afford. Included are a power steering pump fitted with a lightweight aluminum pulley, a power steering tank, a tank mounting bracket, and your choice of either a head mounted or block mounted pump bracket. You get a win-win offer with Allstar power steering kits.
( 12 )
$294.99
Allstar Performance exhaust block-off plates enable you to seal off exhaust ports when repairing or storing your engine. Machined from different thicknesses of aluminum, the plates will seal standard and spread port small block Chevy exhaust ports to protect against moisture, dust, and dirt.
( 4 )
$19.99
If you are going to install a steel billet roller cam, then you will need a bronze distributor gear instead of the original cast iron gear. Allstar Performance bronze gears are constructed from premium aluminum bronze to provide high strength to handle the stresses produced by high-pressure oil pumps. Allstar Performance bronze distributor gears include roll pins.
( 13 )
$32.99
Allstar Performance fuel pump block-off plate for your small block Chevy--what you need at the right price! Their 1/8 in. thick block-off plates are manufactured from stamped steel and are zinc plated for corrosion resistance. Sometimes you just want quality parts at the right price to get the job done. Converting from a mechanical fuel pump to a belt drive or electric fuel pump requires covering the hole left in your engine block. Allstar offers the solution--SBC fuel pump block-off plates.
( 14 )
$6.79
Allstar Performance Crankshaft Keys will restore proper timing gear and dampener positioning. They are available for short, long, and Vortec applications. Replace worn crankshaft keys with new ones from Allstar.
( 3 )
$4.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
