Availability
Showing In Stock Items. Show All 110 Items.
Timken wheel bearings are designed to be exact replacements for your OEM wheel bearings. Their steel roller bearing configuration allows for maximum performance without sacrificing durability. Available for a variety of passenger cars, trucks, and SUVs, these Timken wheel bearings will get you back on the road in no time.
( 263 )
$10.99
—
$78.99
Classic Performance OE drum brake hub kits include all the necessities for a revamp on your brake system. Only the best materials are used—to endure all the street and strip driving you experience. These kits are ideal for builders and Chevy or Buick enthusiasts looking to complete any restoration. They're available for hundreds of applications from the 1960s and '70s. Select the model recommended for your vehicle.
( 22 )
$98.99
Yukon Gear & Axle axle bearings are made from top-quality materials to original specs, so you can be sure that you're getting a quality product. These replacements are available for a variety of axle model applications, from the 1950s and up.
( 74 )
$31.99
—
$220.99
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel wheel hub assemblies come complete with Timken USA bearings and races and a corrosive-resistant coating. In these front hubs, the races will be installed along with new stock size wheel studs, and a new castle nut, cotter pin, washer, and grease cap are included. Each hub is inspected after the races are installed for proper run-out spec to ensure optimal braking performance and no pad knock. Choose the kit specified for your Corvette.
( 2 )
$316.99
When it comes time to replace the bearings on the front of your General Motors vehicle, The Right Stuff wheel bearings are just what you need. Typically, the kits come complete with inner and outer wheel bearings, grease seals, retainers, castle nuts, and dust covers (depending on your application). While installing new brake parts, take the time to refresh the front end with The Right Stuff wheel bearings. Individual bearings and/or kits are available for a wide range of vehicles from the 1950s, '60s, and '70s.
( 13 )
$82.99
Precision-machined and constructed from the highest quality materials, Timken axle bearings provide outstanding and long-lasting performance. Offered in a wide variety of sizes and styles, Timken axle bearings are sure to meet any bearing needs you may have.
( 44 )
$16.99
—
$50.99
Do you want a better sealing surface? Timken wheel seals offer consistent, leak-proof performance. Manufactured with the same precision as the company's legendary bearings, Timken relies on quality materials and their knowledge of design to provide replacement parts with a longer service life. Most of these wheel bearing seals are chemical- and abrasion-resistant, keeping fluids in and dirt out. Choose a name you know to help with your next auto project—choose Timken wheels seals, available for fitment on thousands of vehicles.
( 190 )
$3.99
—
$39.99
How can you take the guess work out of the hardest part of rebuilding your bearing assemblies? Van Steel loaded bearing supports allow you to rebuild your trailing arms without purchasing a bearing setup tool. Available in left hand and right hand versions, these reproductions of the originals contain Timken bearings, SKF seals, and a new dust shield, plus the spacer and shim are set to Van Steel specs. Reduce your rebuild time and utilize Van Steel's bearing specs with their loaded bearing supports.
( 2 )
$241.99
Motive Gear offers axle bearing and seal kits for a variety of applications—including Dana 60, Chrysler 9.25 in., Ford 8.8 in., and Ford 9.75 in. differential case design types. These replacements are manufactured from factory-grade materials and machined to OE specs to ensure proper fit and long-lasting performance. Maintain your drivetrain with components from an industry leader whose products are found in the winner's circle at racing events worldwide.
( 1 )
$157.99
Timken has been a leader in roller bearings since the late 19th century--unquestionably the most trusted name and brand for dependable OE replacements. Timken taper bearing cups are recognized for their quality steel construction and are used in a variety of automotive applications, from trucks to trailers. Various diameters are available for both inner and outer raceway cup locations. When you're dealing with axle bearing races, you can't afford to take chances with inferior products. Find the Timken taper bearing cups to fit your vehicle, then drive with complete confidence in the wheels beneath you.
( 39 )
$11.99
—
$15.99
Classic Performance offers a lineup of wheel bearings to help maintain the efficient stopping performance of your brake system. These components are available in kits that include inner bearings, outer bearings, and grease seals. Select the kit that's tailored for your specific vehicle, then replace your worn or damaged wheel bearings with quality parts from Classic Performance.
( 18 )
$34.99
Spicer axle bearings are the best choice for your repairs. Along with getting a name you can rely on, your task will be completed with the highest quality materials and construction to get your axle back in shape and on the road. Remember, not all bearings are created equal. Insist on genuine Spicer axle bearing assemblies to service your rig.
( 7 )
$16.99
DRP Performance offers premium low drag bearing kits for a wide range of applications, including many Ford, Chevy, and Pontiac cars from the 1960s, '70s, '80s, and '90s. Low drag hub components reduce friction and lower temperatures, making your wheels spin easier, delivering more horsepower to the track—all while reducing maintenance and making your race car faster. Enhance your performance on oval track asphalt, oval track dirt, drag racing, road racing, and street applications. Kits include a DPR bearing spacer, DRP Premium Super finished Bearing Kit, and DRP Ultra low drag seal. Here are details on each component: * DRP Bearing Spacer: A difference you can feel—in the pits and on the track. Bearing spacers make the most difference of any low drag hub upgrade. Properly installed, these spacers will provide an immediate increase in hub free spin, an improvement large enough to feel just by pushing the car around. And the benefit doesn't stop there. Bearing spacers make the most difference when a side load (cornering force) is applied. Drivers have commented on how much faster a car with bearing spacers free rolls when entering and through the center of the corner. Bearing spacers simplify and reduce hub maintenance. Spindle nut torque is no longer sensitive. In fact, with spacers installed, you can tighten the spindle nut as much as you want without overtightening the bearings. (DPR recommends 20-40 lbs.-ft.) Bearings will run cooler and do not need to be repacked as often. Bearing spacers are simple to install. DRP bearing spacers have a threaded adjustment, allowing the user to quickly set bearing end play or preload. A set-screw locks the spacer at the desired adjustment. Once installed, they do not need to be readjusted unless you replace the hub or bearings. Bearing spacers are used in virtually every application in professional motorsports. * DRP Premium Super finished Bearing Kit: Reduce bearing temperature by over 100 degrees F verses stock bearings! Increase free spin by over 250 percent! DPR starts with premium quality bearings and puts them through a super finishing process. This process removes the grind marks and greatly smooths the surface of the bearing roller, while leaving a "hatch" pattern to retain grease. Quality wheel bearings will last the life of most racing applications. * DRP Ultra Low Drag Seal: …billet aluminum, full PTFE sealing lip, reusable, great for any application: dirt, asphalt, road race, street Decrease seal drag by over 1,000 percent! Air gap seals create an "air curtain" to keep debris out and eliminate drag completely! DRP Ultra Low Drag hub seals are true, purpose-built, high performance seals. The housing is made from lightweight aluminum. The sealing element is a special PTFE blend, giving it natural low friction qualities. Seals are reusable. Order the kit recommended for your vehicle.
Not Yet Reviewed
$48.25
—
$165.85
With Raybestos R-Line axle hubs, you can be assured that there are no significant differences from the original design. Offering a full line of coverage from the 1970s and up, along with great value, R-Line replacement hubs are tested to ensure and maintain safe and reliable service. Veering from the original design can cause problems. Raybestos steel axle hubs deliver proper fit and performance that makes your install hassle-free and provides peace of mind. Order the model designed for your vehicle.
( 6 )
$123.99
Timken provides axle spindle bearings for a broad range of automotive applications. These axle spindle bearings deliver the look, fit, and performance of OE. Each part is designed and engineered to match its OE counterpart and is manufactured with the highest quality steel to the highest quality standards. They are available in a wide range of designs and are custom-tailored to specific applications and operating conditions. The rugged design of these axle spindle bearings provides you with proven performance. Make Timken axle spindle bearings the choice for your replacement needs.
( 13 )
$24.99
Clearance
Spicer Drivetrain Products axle seals are the best replacements for your worn or damaged originals. With strength and durability, genuine Spicer seals offer your rebuild or maintenance job a successful end paired with the expected performance. You can also upgrade to their triple-lip design for the ultimate in sealing. No matter which axle seals you choose, you'll have Spicer innovation, a leak-free seal, and peace of mind for your project. Order the model designed to fit your vehicle and axle application.
( 23 )
$6.99
—
$12.99
When you're replacing bearings for your drag hub, Willwood cone bearings offer you premium quality at competitive pricing. These steel inner bearings are manufactured with strict tolerances to ensure the ultimate in performance and service life. If you need race performance bearings, then Willwood cone bearings are what you need.
( 3 )
$11.92
Yukon Gear & Axle Mighty axle seals use the latest designs and manufacturing technologies to produce a precision fit, tight seal, and long life. Maybe your old seals are starting to wear or maybe you're replacing axles—both are a good time for new seals. Whatever the reason, order the Mighty seals from Yukon Gear & Axle designed to fit your application.
( 36 )
$7.99
—
$55.99
These National Bearing wheel bearings are designed for use with your OEM or aftermarket brake rotors. Their steel roller bearing configuration allows for maximum performance without sacrificing durability.
( 24 )
$7.99
—
$32.99
Choose Ratech for front bearing and seal kits that meet and exceed OEM specs. Their kits replace your worn bearings for improved handling and safety. Noises that intensify while accelerating or taking a turn could mean worn bearings. Check it out and then restore control to your front-end with Ratech bearing and seal kits.
( 14 )
$23.50
—
$28.79
Dorman wheel hub dust caps are available in a variety of styles and finishes to add a touch of style and added protection to your brake rotors. The caps are offered in nearly a dozen sizes for secure fitment on specific applications. Help prevent dirt and moisture from disturbing your brake components. Order and install the number of dust seals needed.
( 46 )
$4.99
—
$20.99
Auto Metal Direct front wheel bearing caps finish your classic's wheels with original style. These AMD stamped steel caps are exact reproductions of the factory original "button-style" units. They are zinc plated. Little details matter; restore you classic's appeal with Auto Metal Direct front wheel bearing caps.
( 14 )
$18.99
Summit Bucks
ACDelco offers GM Genuine Parts wheel bearings for a variety of GM applications. These replacements allow the wheel to rotate with minimal friction—and contain tapered roller, straight roller, or ball-bearing elements, depending on the vehicle. Wheel bearings support the weight of the vehicle, and are lubricated with axle oil or wheel bearing grease. Machined from high-quality materials, these original equipment bearings are engineered to provide the same fit, performance, durability, and service life you expect from ACDelco GM Genuine Parts wheel bearings.
( 3 )
$4.99
—
$50.99
Summit Bucks
ACDelco multi-purpose seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These replacement seals help keep dirt and water out and seal in lubricant, conforming to the rotating surface to help provide leak-free operation. The GM Genuine Parts are true OE parts installed during the production of or validated by General Motors for GM vehicles, ensuring accurate fit and performance.
( 10 )
$12.99
—
$17.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
