Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
30 Results Found For "Engine"
Moser Engineering 9 in. Housing and Axle Packages
Moser Engineering 9 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without any modifications. They include a steel housing, an axle shaft set with wheel studs, and bearings. You can order them with brakes, or to fit your OEM brakes or a specific brake kit. Available in a multitude of options, these packages are a perfect fit for your everyday driver or performance vehicle.
Not Yet Reviewed
$1,480.00
—
$3,114.00
Moser Engineering 12-Bolt GM Housing and Axle Packages
Moser Engineering 12-bolt GM housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without modifications. They include a steel housing, an axle shaft set with wheel studs, bearings, and a drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser 12-bolt GM housing and axle packages are a perfect fit for your everyday driver or performance vehicle.
Not Yet Reviewed
$4,494.00
Moser Engineering M9 Fabricated 9 in. Housing and Axle Packages
Engineered to race tolerances, these Moser M9 fabricated 9 in. housing and axle packages allow you to build your axle package with various custom selections and specifically for your application. They are built race-tough with seamless steel tubing, new brackets, new housing ends, new bushings, custom alloy axles, studs, and heavy-duty retainer plates. The Moser housings are made from 1/8 in. laser-cut mild steel and are combined with a 3/8 in. face plate. They come standard with internal gussets and bulk heads, able to take on a tough day at the track. These M9s also have custom-machined fill and drain bungs for easy maintenance. See the linked custom selection sheet to design and create your next M9 fabricated 9 in. housing and axle package.
Not Yet Reviewed
$2,547.00
Strange 12-Bolt F-Body Rear End Assemblies
These Strange 12-bolt F-body rear-end assemblies are designed to replace the entire rear-end in your F-body Camaro or Firebird. They feature the following components: * Strange designed 12-bolt case with torque arm provision * Premium nodular iron casting * Choice of differential carrier * 33 or 35 spline Pro Race Axles * Pro gear set * Choice of gear ratio * Fully welded axle tubes * S-series yoke with u-joint * Accepts 1993-97 or 1998-2002 disc or drum brakes (sold separately) * Chrome rear-end cover
Not Yet Reviewed
$3,033.99
—
$3,419.99
Strange Bolt-In S60 Rear Differential Assemblies
Strange bolt-in S60 rear differential assemblies are designed to fit your vehicle without any modifications. Brake kits are sold separately. Assemblies feature: * Strange-designed S60 housing cast from nodular iron * Large nodular iron bearing caps * One-piece center casting for enhanced rigidity * Adjuster nuts for precise and easy setup * Fully welded tubes * Strange ring and pinion gear * 35-spline axles
( 4 )
$2,794.99
—
$3,371.99
GearStar GM 6L90E Level 4 Transmissions
GearStar offers GM 6L90E Level 4 transmission models for rear-wheel-drive or four-wheel-drive applications. They feature different advertised horsepower ratings and flash stall ratings. Each master overhaul kit comes complete with new gaskets, seals, rings, and pistons. The transmissions are compatible with engines such as Chevy small block Gen III/IV (LS-based) models from 1997 and up. Transmission details: * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity 3-5 reverse clutch pack using latest generation friction and steels * Expanded capacity 1-2-3-4 clutch pack using latest generation friction and steels * Expanded capacity 4-5-6 clutch pack using latest generation friction and steels * Low / Reverse clutch pack using latest generation friction and steels * 2-6 clutch pack using latest generation friction and steels * Updated AC Delco pump cover (stator support) * New AC Delco pump body (bellhousing) * New pump vanes with hardened rings * Billet pump rotor * Billet 4-5-6 clutch hub * Hardened rear planetary assembly * Upgraded line boost valve and slide spring * Performance tuned valve body with new AC Delco transmission control module and solenoid body * Hardened and reinforced clutch hubs * 258mm billet triple disc converter * All transmissions are custom-built by one of five master techs from start to finish—and DYNO tested with converter the equivalent of 100 miles to ensure that the transmission and converter package are in perfect operating condition before they leave the GearStar facility.
Not Yet Reviewed
$9,945.00
—
$10,445.00
GearStar GM 6L80E Level 4 Transmissions
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 6L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 600 hp * Master overhaul kit with gaskets, seals, rings, and pistons * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity clutch packs using the latest generation friction and steels: -- 3-5 reverse clutch pack -- 1-2-3-4 clutch pack -- 4-5-6 clutch pack -- Low/reverse clutch pack -- 2-6 clutch pack * Updated ACDelco pump cover (stator support) * New ACDelco pump body (bellhousing) * New pump vanes with hardened rings * Billet pump rotor * Billet 4-5-6 clutch hub * Hardened rear planetary assembly * Upgraded line boost valve and slide spring * Performance tuned valve body * New ACDelco transmission control module and solenoid body * Hardened and reinforced clutch hubs
Not Yet Reviewed
$9,745.00
—
$10,245.00
GearStar GM 6L80E Level 3 Transmissions
GearStar offers GM 6L80E Level 3 transmission models for rear-wheel-drive or four-wheel-drive applications. They feature different advertised horsepower ratings and flash stall ratings. Each master overhaul kit comes complete with new gaskets, seals, rings, and pistons. The transmissions are compatible with engines such as Chevy small block Gen III/IV (LS-based) models from 1997 and up. Transmission details: * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity 3-5 reverse clutch pack using latest generation friction and steels * Expanded capacity 1-2-3-4 clutch pack using latest generation friction and steels * Expanded capacity 4-5-6 clutch pack using latest generation friction and steels * Low / Reverse clutch pack using latest generation friction and steels * 2-6 clutch pack using latest generation friction and steels * Updated AC Delco pump cover (stator support) * New pump vanes with hardened rings * Hardened pump rotor * Upgraded line boost valve and slide spring * Performance tuned valve body with new AC Delco transmission control module and solenoid body * Hardened and reinforced clutch hubs * Billet single disc converter * All transmissions are custom built by one of five master techs from start to finish—and DYNO tested with converter the equivalent of 100 miles to ensure that transmission and converter package are in perfect operating condition before they leave the GearStar facility.
Not Yet Reviewed
$8,745.00
—
$9,245.00
GearStar GM 6L90E Level 3 Transmissions
GearStar GM 6L90E Level 3 transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance and durability but longevity as well. These units come programmed with a VIN number that will work with most aftermarket transmission controllers. If this is going into a stock application, GearStar has the ability to program the transmission with your VIN number to ensure it's a direct replacement. The next upgrades for this transmission are expanded capacity performance clutch packs. Level 3 transmissions come with all new electrics, including the wiring harness, internal computer, all sensors and solenoids—along with all new bushings, bearings, and seals. To help with durability and performance, the transmissions come with a billet pump rotor, billet 4-5-6 clutch hub, hardened and reinforced clutch hubs, and a hardened rear planetary gear assembly. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the transmission, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$8,945.00
—
$9,445.00
FTI Performance Pro Powerglide Level 5.5 Transmissions
Delivering big power for racers, FTI Performance Pro Powerglide Level 5.5 transmissions are an unbreakable unit. Equipped with the FTI creatively designed spiral springs and valve body, these units don't creep when the brake is set—a must in today's racing world. With in-house machining, the transmissions are hand-assembled by one builder, and every clearance is set to exacting tolerances. FTI automatic transmissions house the greatest advances in Powerglide racing technology, and are designed to withstand the rigors of today's high performance engines in an extremely demanding environment. Other features include: * 2200 advertised horsepower rating * Protree transbrake 265 lbs. * Lightened steel clutch hub * 1.80 or 1.69 straight cut planetary * Vasco input shaft * 10-clutch drum * Pro mod wideband * High-flow pump * 300M output shaft
Not Yet Reviewed
$5,349.00
TCI Competition Torque Converters
TCI Competition torque converters are proven race winners and an excellent choice for stock and Super Stock cars. They work well with both big and small blocks, producing power between 4,500 and 7,000 rpm. You'll maintain engine rpm between shifts with their efficient design, and gain improved reliability with an oversize caged bearing supporting a new stator. ETs are more consistent and reaction times faster as a result of a stronger housing, which resists flexing and ballooning.
( 9 )
$1,489.95
—
$1,914.95
American Powertrain ProFit Tremec TKX Manual Transmission and Installation Kits
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$4,395.00
—
$4,485.95
Hughes Performance Tow Master Series Torque Converters
Tow Master series torque converters from Hughes Performance are designed to increase bottom-end pulling power in your tow vehicle without sacrificing top-end efficiency or lockup. Because they offer your vehicle more power with less effort, mileage can be increased by as much as 1-2 miles per gallon. Recommended for slightly modified engines, these Tow Master converters help you get the job done. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 25 )
$520.99
ATI Fuel & Blown Torque Converters
Nothing is tougher on a torque converter than putting it behind a blown fuel engine. Made for supercharged engines, ATI Fuel & Blown torque converters are designed for the ultimate in high-horsepower holding for big cubic inch nitrous or supercharged engines. They feature a special 22-element sprag with double-cage construction to simultaneously control each sprag element. The sprag sits in concentric races that are heat-treated to 65 on the Rockwell C scale. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.
Not Yet Reviewed
$1,263.99
—
$1,499.00
TCI PRO-X Torque Converters
These TCI PRO-X torque converters are designed specifically for Top Sportsman, Top Dragster, and Outlaw Street Car classes. Able to handle 2,500+ hp applications (including multi-stage, nitrous-assisted, supercharged, and twin turbocharged engines), these high-strength torque converters feature a TCI exclusive--HDT (Heat Dissipating Technology) Coating--further enhancing their ability to deliver unsurpassed consistency and durability. Features include: * Hand-built steel stator * Forged mounting cover * 3 sets of heavy-duty internal bearings * Furnace-brazed turbine and pump assembly * Built for GM, Ford, and Chrysler transmissions * 4 or 6-bolt flanges and optional billet front available
Not Yet Reviewed
$1,794.95
RAM Truck Pulling Custom Order Clutch Kits
RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.
( 2 )
$1,849.99
—
$2,299.99
ATI Streetmaster Torque Converters
ATI Streetmaster torque converters are commonly used to enhance bottom-end torque characteristics without sacrificing cruise efficiency. They generally provide an 800 to 1,000 rpm increase in stall speed when used with stock-type rear-end ratios and slightly modified manufactured engines.
Not Yet Reviewed
$598.99
—
$679.00
ATI Treemaster MRT Torque Converters
Quick, consistent reaction times are essential to winning races, and there's nothing better suited to the task than highly efficient ATI Treemaster MRT (Minimum Reaction Time) torque converters. They are computer-mated to your combination to take full advantage of your engine's torque curve. Specific stator designs are used to achieve free speed when up against the converter, and instant lockup when using a brake. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.
Not Yet Reviewed
$1,123.99
—
$1,205.99
FTI Performance SRL-3 Series Billet Triple Clutch Torque Converters
FTI Performance SRL-3 Series billet triple clutch torque converters are designed for engines with some serious power! They're engineered to be locked up under full throttle and can withstand some abuse. The billet lockup piston, triple bearings, and anti-ballooning impeller hub are designed to get the job done. These converters are available in different stall torque ratios and stall ratings to match your engine and transmission combination.
( 7 )
$1,429.00
GearStar GM 200-4R Level 2 Transmissions
GearStar offers Level 2, 3, and 4 GM 200-4R performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar GM 200-4R Level 2 transmissions deliver improved performance, a straightforward installation, and a surprisingly affordable price tag. A great replacement for an older 2-speed Powerglide or a 3-speed Turbo Hydra-Matic, you don't have to make major adjustments, plus the fourth gear lets the engine rotate at a lower rpm, reducing fuel consumption and wear and tear on the drivetrain. You can also change the larger rear axle ratios without affecting street-ability. Features and specs: * 400 hp and up to 400 lb.-ft. of torque * Stall: 1,800 to 2,400 * Master overhaul kit with high-energy frictions and new steel plates * Wide carbon fiber intermediate band * Transgo recalibration shift kit * New valve body separator plate * Original equipment-style filter * High-capacity servo * New Torrington bearings * Bushing kit * Thrust washer kit * High-capacity 10-vane pump assembly with new rotor and slide * Hardened stator shaft * New vanes and hardened rings * 0.500 boost valve * Updated pressure regulator valve * Extra-capacity direct drum assembly * Hardened sun shell * Reinforced forward drum assembly * New speedometer drive gear * New speedometer driven gear * Vacuum lock-up system * Installation kit: -- Universal fill tube and stick -- Universal throttle valve pressure cable -- Universal transmission mount -- Universal converter cover (plastic)
Not Yet Reviewed
$6,745.00
ATI Treemaster Torque Converters
ATI Treemaster torque converters use all-new internal components that are designed to optimize efficiency and durability for each piece. They are computer-mated to your combination to take full advantage of your engine's torque curve. Specific stator designs are used to achieve free speed when up against the converter, and instant lockup when using a brake. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.
( 2 )
$1,033.99
—
$1,161.99
ATI Street Rod Transmission Packages
Take the guesswork out of which parts to buy and save money with ATI Street Rod transmission packages! Choose from several applications that include one of ATI's Street/Strip transmissions, a Streetmaster torque converter, a transmission cooler, and a "Trick Stick" locking dipstick and tube. Available with a variety of transmission options and components, these ATI Street Rod transmission packages can handle the power of your high performance engine and transfer that power to the rear differential.
Not Yet Reviewed
$3,419.99
—
$9,243.99
Inland Empire Driveline High-Strength Custom Order Driveshafts
Big power and lots of traction can twist your stock driveshaft into pieces, so replace it with something better, such as these Inland Empire Driveline high-strength custom order driveshaft assemblies. The 3.5 in. diameter tubes are custom-drawn for consistent strength, and the forged yokes are welded on using state-of-the-art processes for improved reliability. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.
( 15 )
$872.35
—
$943.80
ATI Super Streetmaster Torque Converters
ATI puts the same technology into these Super Streetmaster torque converters as they do into all of their championship-winning parts. ATI furnace-brazes the pumps and turbines and installs new billet stator caps, springs, and rollers in the sprags. New hubs, pilots, and mounting rings have been installed and CNC-machined for perfect accuracy. Every available option has been taken to ensure that these converters will handle anything that you throw at them.
Not Yet Reviewed
$598.99
