Availability
Showing In Stock Items. Show All 434 Items.
Summit Bucks
ACDelco engine oil level sensors measure the level in your vehicle's oil pan and send warnings to the information center or dash panel if it falls too low. These premium, aftermarket replacement sensors are available in several styles to ensure precise OE fitment and performance. Order the model recommended for your application.
( 8 )
$31.99
On Sale
Fleece Performance universal coolant level float switches feature stainless steel bodies with 1 in. NPT thread, 8 in. harness, and 2-pin metripack connector. They have a 3/4 in. float travel and are for use with the Fleece's coolant tank or custom configuration tanks with 1 in. NPT bung.
Not Yet Reviewed
$39.99
$33.99
These Standard Motor Products replacement coolant level sensors provide the PCM with an analog input signal, along with an oxygen sensor, to go into the closed loop mode of controlling the fuel mixture. They are designed to provide actual engine temperature information to the PCM. The PCM then feeds the sensors a fixed reference voltage of usually 5 volts when the engine is on. The resistance in the sensors is high when cold, and drops as the sensors warm up, to alter the voltage signal back to the PCM. Are you experiencing temperature problems with your vehicle? Try one of these Standard Motor Products replacement coolant level sensors to eliminate any chance of problems.
( 4 )
$29.99
—
$37.99
Summit Bucks
ACDelco GM Genuine Parts coolant level sensors signal you when your engine cooling system is low on fluid, helping you to avoid overheating and possible engine damage. These GM-recommended replacements have been manufactured to fit your specific GM vehicle and engine application, providing the same performance, durability, and service life you expect from General Motors.
Not Yet Reviewed
$29.99
Try Dorman engine oil pressure sensors for accurate engine oil pressure readings. These replacement sensors will help you to protect your vehicle from being driven at low oil pressure, to avoid costly engine repairs and help maintain performance.
( 10 )
$45.99
Summit Bucks
ACDelco GM Genuine Parts engine coolant sensors are a GM recommended replacement component for many vehicles on the road today. These original equipment engine coolant sensors are manufactured to fit your GM vehicle, providing you the same performance, durability, and service life you expect from General Motors.
( 71 )
$20.99
—
$41.99
Delphi engine crankshaft position sensors exceed OE requirements and undergo certified electrical testing. They feature enhanced sensing functionality that delivers reduced emission, improved reliability, and superior drivability. Delphi engine crankshaft position sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. Choose Delphi for the OE replacement parts that your car was born with.
( 16 )
$24.99
—
$51.99
If you're swapping an LS Series engine into your street rod, musclecar, or classic car, you're going to need one of these Chevrolet Performance LS engine reluctor wheels. They are designed to fit late model Generation III/IV Chevrolet LS Series engines. The reluctor wheels are available in different tooth counts to accommodate your specific year and engine combination.
( 7 )
$31.86
Summit Bucks
ACDelco Gold engine coolant sensors are a high-quality aftermarket replacement component for many vehicles on the road today. These premium sensors are manufactured to exceed your expectations for fit and performance. Order the model recommended for your application.
( 43 )
$22.99
—
$29.99
Ensure your engine cover stays in place with specialized mounting studs from Chevrolet Performance. They're machined from high-quality materials that meet or exceed strict quality standards. The studs are available for a wide variety of vehicle and engine applications.
( 3 )
$30.99
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 17 )
$20.99
—
$30.99
Engine Works has been delivering a comprehensive portfolio of high-quality, high-value, and high performance products since 1995, so you can trust them to get your vehicle "fired up". Engine Works 8.5mm spark plug wire sets are available in many different plug boot configurations with red, blue, or black wires, covering a wide range of engines and vehicle applications. Choose a set designed for your application in your preferred color.
( 1 )
$54.96
Lingenfelter LS1-LS2 knock sensor relocation harnesses allow the single-wire LS1 knock sensors located on top of the LS1 manifold to be relocated on both sides of the LS2 block and plugged into the factory LS1 PCM harness. They also offer the perfect added length and thermal protection required to be routed near hot exhaust manifolds. Lingenfelter LS1-LS2 knock sensor relocation harnesses are compatible with the PCM harness in LS1 Corvette and F-body cars. Features include: * Fully plug-and-play with the factory harness and sensors * Military spec high-temperature PTFE wire (same type used on oxygen sensors) * High-temperature (1,200 degrees F) heat-treated fiberglass protective loom * All connections crimped and soldered
( 5 )
$39.99
Brothers Trucks ground strap kits offer a complete set of straps and hardware for one truck. These straps were factory equipment to properly ground the engine, body, and chassis. Each strap kit includes: * Five ground straps with fasteners -- Three short straps 4.8 in. long -- Two long ground straps 11 in. long -- Screws and washers
( 1 )
$43.15
Lingenfelter's clutch and throttle position harnesses make the installation of their position activation switch easy. These harnesses allow you to acquire the clutch position signal voltage without modifying any of the vehicle's existing wiring. Order the harness designed for compatibility with your make and model.
( 2 )
$28.45
Engine Works offers distributor gears for a variety of applications, including many stock or Ready-to-Run (RTR) distributors. These replacements are precision-engineered and meticulously machined from extruded bonze for unparalleled durability. They're available in multiple shaft diameters to fit OEM-style and aftermarket distributors. On vehicles with mechanical spark timing, the distributor gear sits at the bottom of the distributor shaft, where it meshes with the gear on the camshaft. This gear can wear out over time, or you might need one that's compatible with a new camshaft. To maintain proper timing, order the replacement recommended for your vehicle.
Not Yet Reviewed
$47.49
For throttle position sensing, Lingenfelter offers throttle body signal output harnesses to fit a variety of applications. They're designed to provide an accurate throttle body position signal and are ideal for use with Lingenfelter launch or nitrous controllers. The harnesses feature OEM-style connectors and come with all the required hardware to complete your install.
( 3 )
$33.20
Clearance
Having difficulty starting in cold weather? We're referring to your car, not you. Or, maybe you're seeing readings of overheating when all is normal. If your engine is giving questionable temperature readings or having trouble starting or running, you may need a new Beck/Arnley engine coolant temperature sensor. These quality-made sensors will signal your car's computer with the correct operating temperature to get the right amount of air and fuel flowing. Replace corroded sensors with Beck/Arnley engine coolant temperature sensors.
( 2 )
$23.99
Edelbrock Pro-Flo 4 Plus EFI self-learning engine management system harnesses are offered to support your specific configuration. With an eye toward making your hot rod transplant simple and successful, Edelbrock has created several add-on harnesses. They include LS drive-by-wire, knock sensor, a second oxygen sensor, and 2- or 4-wire LS alternators to radiator fan relay harnesses to complete and/or expand your base Chevy LS, Mopar Gen III Hemi, and Ford Coyote Pro-Flo 4 Plus EFI kits.
( 2 )
$33.95
—
$46.95
Lingenfelter offers this quick plug-in harness to adapt your factory harness to accept the new 100mm mass airflow sensor. These harness adapters come in two versions. The first is the 5-wire to 5-wire harness; and the second is the 3-2 to 5 harness. The 2-wire connector is for the air intake temperature sensor connection.
( 1 )
$39.99
Summit Bucks
Clearance
ACDelco GM Genuine Parts remanufactured engine control modules are a GM recommended replacement for your vehicle's original component. These modules regulate various parts of your vehicles engine by taking the inputs from sensors and additional modules and referencing that information back to other sensors, modules, and other areas of the vehicle. Remanufacturing the engine control modules is an industry standard practice that involves disassembly of existing units, and replacing of components that are most prone to wear with new components. Damaged and obsolete parts are replaced and end of line tested to ensure they perform to ACDelco specifications. These GM Genuine Parts are the true OE parts installed during production or validated by GM, for GM vehicles--designed, engineered, and tested to rigorous standards and backed by General Motors. remanufactured engine control modules will offer the performance, durability and service life you would expect from General Motors.
( 8 )
$89.99
$20.50
Summit Bucks
Clearance
ACDelco GM Genuine Parts engine cooling fan resistors provide for stepped voltage drops—to deliver high and low speeds for the electric motor on your engine's cooling fan. These resistors are factory-recommended replacements and have been manufactured to provide the same performance, durability, and service life you expect from General Motors. Order the model designed for your vehicle application.
( 2 )
$48.99
$32.50
On Sale
Holley offers MAP sensor adapters for a variety of Chevrolet LS engine applications from 1997 and up. They feature pre-terminated connectors and wiring for a direct plug-and-play installation. Depending on the model you select, the adapter will allow: * The installation of an LS3 MAP sensor in an LS2 or LS1 equipped vehicle * The installation of an MPFI WeatherPack 3-pin connector MAP sensor to the 3-pin Delphi GT connector * The installation of a Delphi MIP 3-pin connector MAP sensor to the 3-pin Delphi GT connector
( 20 )
$40.21
$36.00
—
$36.19
ICT Billet throttle body extension harnesses are assembled with OEM tooling, OEM Delphi components (connector, lock, seals, and terminals), and OEM harness wire colors. Don't take a chance with cheap wire connectors; poor quality materials can have conductivity issues that will cause your engine to run poorly and be difficult to diagnose. ICT Billet throttle body extension harnesses provide quality you can trust. Order the model recommended for your application.
( 1 )
$43.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
