Availability
Showing In Stock Items. Show All 152 Items.
On Sale
Headers are widely believed to be one of the best performance values available today--so why put stock manifolds on your trick ride? After dropping a different engine into your project vehicle, help it produce more horsepower and fuel economy with these specialty and engine swap headers from Hedman. They feature durable 18-gauge steel construction and have thick 1/4 in. flanges for a long-lasting, leak-proof seal. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 184 )
$306.99
—
$762.99
$276.29
—
$686.69
On Sale
Hot rodding has always been about taking two or more parts that were never designed to work together and make then work together seamlessly. It is a never-ending effort to shove as much horsepower and torque under a vehicle's hood as possible. Unfortunately, any project can come to a screeching halt when it comes to bolting up a set of headers. Hedman Hot Rodz engine swap headers are specifically designed for non-factory engine and vehicle model combinations. Available in mild steel or stainless with 16-gauge header tubes uncoated and coated. The HTC silver and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging.
( 70 )
$302.99
—
$702.99
$272.69
—
$632.69
On Sale
Install an LS powerplant under the hood of your classic car or truck using a set of Hooker LS engine swap headers. They feature mild steel construction and are available painted, or ceramic coated in silver or black. Hooker headers' unique design will optimize the performance of your LS engine.
( 11 )
$349.95
—
$1,299.95
$314.95
—
$1,168.95
On Sale
Kooks Headers Race LS engine swap headers are available for a variety of specific chassis or as universal-fit designs. Offered in shorty, mid-length, and long tube versions in a choice of diameters and styles (varying by application), they feature stainless steel construction and include installation hardware. Chassis compatible with Kooks Headers Race LS engine swap headers include: * 1968-72 GM A-body * 1970-81 GM F-body * 1967-69 GM F-body * 1968-74 GM X-body Note: Due to the custom nature of these headers, other parts and modifications may be necessary for proper fitment.
( 1 )
$897.92
—
$1,079.19
$763.23
—
$917.31
On Sale
DEI catalytic converter shields are simple, but effective solutions to maintain optimum performance from your vehicle. Aggressive driving can cause excessive heat that can transfer to the interior or engine compartment, so keep things cool with these converter heat shields. DEI catalytic converter shields are available in a universal design to replace damaged or missing factory heat shields on almost anything you drive or application-specific designs to upgrade heat protection from critical engine components. Trust DEI to keep your vehicle cool and running at optimum performance.
( 4 )
$91.99
$82.79
On Sale
These Hooker LS cast iron exhaust manifolds have been designed to hug close to the engine block so they fit into a wide variety of replacement engine swap applications. Their contoured design aims the exhaust directly at the exit port for greatly improved flow. They are cast from high silicon moly ductile iron to provide durability, leak free performance and less under the hood noise than conventional headers. The Hooker LS cast iron exhaust manifolds are recommended for strong performance on engines up to 500 horsepower and are available in plain as cast finish or with Hooker ceramic coatings for reduced engine temperatures and improved corrosion resistance. They also feature 304 stainless steel mating flanges to help provide a leak-free installation, and a two bolt exit flange which can be used with OEM style gaskets and fasteners for an excellent seal.
( 38 )
$479.95
—
$599.95
$430.95
—
$538.95
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 991 )
$229.95
—
$667.95
$178.95
—
$600.95
On Sale
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$510.85
—
$1,211.10
$459.76
—
$1,089.99
On Sale
Hooker Blackheart exhaust manifolds are designed to be used with Hooker Blackheart engine mounts and transmission crossmembers for a trouble-free installation. They feature nickel plated steel mating flanges and include MLS mating flange gaskets and hardware. Blackheart exhaust manifolds are cast from high-silicone moly ductile iron to provide durability and corrosion resistance.
( 19 )
$331.95
—
$449.95
$186.95
—
$403.95
On Sale
Patriot Clippster headers feature longer primaries that exit toward the rear of the engine compartment to clear steering and suspension components. They have slightly shorter primaries than full length headers and provide ground clearance on lowered vehicles. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes. * Raw steel is available for individual customizing
( 322 )
$288.05
—
$774.50
$259.24
—
$697.05
On Sale
Patriot's popular 1955-57 Chevy passenger car headers for small block, big block, and LS1/LS6 swaps offer superior performance and fit. These headers feature durable 18-gauge tubing, accommodate the GM 605 power steering box conversion, and fit most motor mounts. Their extra ground clearance makes "slammed" cars drivable and above-frame rail exhaust system installation easy. Patriot Tri-5 headers come with gaskets, header bolts, and collector reducers. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects the headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection. * Raw steel is available for individual customizing
( 123 )
$421.95
—
$818.55
$379.76
—
$736.70
On Sale
Patriot full-length chassis and fenderwell headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which results in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 251 )
$314.45
—
$848.75
$283.00
—
$763.88
On Sale
Hooker Blackheart LT swap exhaust manifolds are intended for GM LT engine swap applications where durability, quiet operation, and leak-free sealing is desired. The 2.5 in. outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold, and a tight tuck design provides a universal fit for most popular chassis, as well as a clean traditional muscle car appearance. OE-quality MLS flange gaskets and hardware are included to ensure excellent fitment and a leak-free installation. Hooker Blackheart LT swap exhaust manifolds are available in plain as-cast finish, or black or silver ceramic coatings for reduced engine compartment temps and improved corrosion-resistance. Features of Blackheart LT swap exhaust manifolds: * Cast from Hi-Silicon-Moly Ductile Iron * Contoured design guides the exhaust directly toward the exit port for improved flow and minimal turbulence * Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included for installation * Provides years of leak-free performance with less underhood noise than traditional headers * Shorty design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance * Patent Pending design
Not Yet Reviewed
$417.95
—
$649.95
$238.95
—
$583.95
On Sale
At the heart of any performance vehicle is its exhaust system. Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for years. They continue to push the boundaries of performance with their Hooker Blackheart exhaust systems line—part of a platform-designed full exhaust program. These components provide maximum exhaust velocity, ground clearance, style, performance, and quality. Order the configuration tailored for fitment on your specific vehicle. When it's time to tear the heart out of the competition—choose Blackheart! Depending on the application, features may include: * Full stainless steel construction for maximum strength and durability * High-efficiency crossovers and high-flow TIG-welded mufflers * OE-quality hardware (clamps, hanger rods, and rubber isolators) for excellent fitment and leak-free installation * Straight-through, no-muffler design on some systems for maximum flow and the most aggressive sound on or off the throttle * Downpipes available with or without high-flow cats * Quality welds for strength, longevity, and good looks * Utilize factory mounting points for ease of installation * Tube geometry designed for maximum ground clearance and hassle-free installation * Limited lifetime warranty * Dual-mode systems feature high-flow, straight-through, dual-path mufflers with bypass valve, utilizing the factory NPP actuator (mellow throaty tone with closed valve, and aggressive race sound with open valve) * Where applicable, they utilize OE-style AFM valves to prevent "check engine" light and reduce unwanted harmonics in 4-cylinder mode * Some systems feature dual-wall polished tips with laser-etched Hooker Blackheart logo * Some designed for off-highway race use only
( 46 )
$999.95
—
$2,099.95
$898.95
—
$1,888.95
On Sale
Patriot Tight Tuck headers provide the solution to many problems associated with engine swaps in modern street rods. They fit in the tightest of engine compartments, and they clear most stock motor mounts. Many Tight Tucks are manufactured from durable 16-gauge tubing and come complete with gaskets, header bolts, and collector reducers. Besides their popular finishes, Patriot also offers a chrome option that is polished before and after assembly for show-quality appearance, as well as a stainless steel option. Order the model designed for your vehicle and engine application. Patriot Tight Tuck finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 65 )
$299.95
—
$774.50
$269.96
—
$697.05
On Sale
With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 227 )
$870.95
—
$1,399.95
$522.95
—
$1,258.95
On Sale
Flowmaster FlowFX mufflers feature mandrel-bent bright stainless steel tubing, mated to specially designed straight-through for great sound and maximum performance. FlowFX 409 stainless steel mufflers deliver a moderate to aggressive interior and exterior sound level that will appeal to anyone looking for a deep, powerful exhaust note.
( 391 )
$399.95
$359.95
On Sale
These Flowmaster Scavenger Series Elite headers open up airflow for serious added power. All Scavenger Series Elite headers are made of high-quality stainless steel and have been polished ceramic coated. They are available in several styles, such as shorty, full-length, and block hugger to accommodate a large variety of vehicles. They have a standard flange design and include bolts and gaskets for installation. Get yourself a set of these Flowmaster Scavenger Series Elite headers to keep yourself ahead of the competition.
( 68 )
$949.95
—
$1,159.95
$853.95
—
$1,042.95
On Sale
Go Fast Bits offers DV Plus Range with Direct-Fit Performance Diverters for a wide range of domestic and import vehicles. GFB's DV+ solution couldn't be simpler: keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great—the ECU opens it faster than any pneumatic valve, so why replace it? The weak point, however, is the valve mechanism itself. GFB's DV+ solves this problem by replacing the valve parts with an anodized billet aluminum housing, fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, or include a solenoid valve with the diverter. These approaches add unnecessary cost and additional parts (in some cases requiring long vacuum hose runs, mounting brackets, etc.). All these additional items result in a product that is slower, less responsive, more expensive, and takes longer to install. GFB's DV+ solution, on the other hand, is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Oh, and it doesn't require different springs or frequent re-builds, either. Order the model recommended for your vehicle.
( 1 )
$147.60
$132.84
On Sale
For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 2458 )
$262.99
—
$923.99
$236.69
—
$831.59
On Sale
Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 945 )
$299.95
—
$1,049.95
$250.95
—
$871.95
On Sale
Hooker exhaust manifolds offer improved flow. They feature cast iron construction with 2.5 in. diameter outlets and have been designed to hug close to the engine block so they fit into a wide variety of replacement and engine-swap applications. Their contoured design aims the exhaust directly at the exit port for improved flow. Hooker exhaust manifolds will provide years of leak-free performance with less underhood noise than traditional headers. Plus, their shorty design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance. Features include: * Intended for engine swap applications where durability, quiet operation, and leak-free sealing is desired * Available in plain as-cast finish or with various Hooker ceramic coatings for reduced engine compartment temperatures and improved corrosion resistance * Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included * Cast from high-silicon-moly ductile iron to provide durability and corrosion resistance * 2.5 in. outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold *Tight tuck design provides universal fit for most popular chassis and a clean, traditional muscle car appearance
( 32 )
$301.95
—
$659.95
$271.75
—
$592.95
On Sale
Stainless Power products are designed by Stainless Works, and made exclusively to our exact specifi cations from the highest quality 304 stainless steel. Factory manifolds can be restrictive and hold back the true potential of your ride. Stainless Power headers unlock the power of your engine. Our long tube, free- flowing design reduces back pressure, and will bring new found power that you can feel and hear.
( 18 )
$1,519.05
$1,279.20
On Sale
Flowtech shorty headers are just the ticket for those who want the best of both worlds--top performance and a clean machine. They bolt on to your OEM exhaust system, offering real horsepower gains plus increased efficiency. These headers are made from durable 16-gauge tubing; feature TIG-welded, extra-thick 3/8 in. flanges for a leak-free seal, and come complete with premium gaskets and hardware. Plus, Flowtech Shorty headers are available in high heat-resistant black paint, ceramic thermal barrier coating or natural stainless finishes for improved rust and corrosion resistance. Additional features: * Designed as a direct fit replacement for OEM exhaust manifolds * High-flow, mandrel-bent tubes provide consistent tubing diameters for smooth flow and increased exhaust velocity Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 87 )
$340.95
—
$449.95
$306.85
—
$403.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
