Availability
Showing In Stock Items. Show All 19 Items.
On Sale
With Summit Racing™ tubular rear trailing arms you get heavy-duty tubular steel construction, which is lighter weight but adds stability and strength, a durable black powdercoat finish, and long-lasting polyurethane bushings. Our tubular rear trailing arms offer a great alternative to rusty old stamped factory arms.
Not Yet Reviewed
$519.99
$479.99
On Sale
What level of suspension performance do you desire? Hyperco high performance street (HPS) composite leaf springs will meet your desires with improved cornering ability, road feel, and initial response, while maintaining a quiet and comfortable ride. Advantages of Hyperco HPS composite leaf springs include: * 70 percent lighter than steel * Will retain their designed arch, preventing sagging and chassis inconsistency * Will not corrode * Provides more side bite off the corners * Longer life than that of traditional steel leaf springs
Not Yet Reviewed
$408.00
$367.20
On Sale
Holley has responded to the expanding LS marketplace by developing the most complete line-up of LS performance upgrades and engine swap products, including Holley LS engine power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low LS accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps will also work with Holley's special LS reservoir kit.
( 8 )
$449.95
$292.95
On Sale
Holley C10 steering shaft kits replace a worn stock unit on your 3rd generation GM C10 truck or with an engine swap where additional clearance may be needed. Offered in two styles for early or later trucks, both versions feature sturdy DD-style steel shafts and dual U-joints with plenty of adjustability for your project to ensure everything is exact and safe. Choose the proper C10 steering shaft for your year truck. Features: * Complete bolt-on solution with little or no modifications necessary depending on use * Eliminates factory rag joint providing a precise and responsive steering input * Will also work as a factory replacement steering shaft * E-coat for maximum protection against corrosion * Steel construction with retaining screws on the bearing caps for strength and durability
( 1 )
$213.95
$139.95
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$285.95
—
$418.95
$164.95
—
$272.95
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$380.95
—
$399.95
$219.95
—
$247.95
On Sale
REKUDO front sway bars are suitable for street driving, autocross, and weekend warrior track days. Their sturdy diameter cuts body roll and stiffens up the front suspension. Polyurethane frame and end link bushings are used as an upgrade from rubber, offering superior durability and function. Polyurethane bushings allow the bar to come into action immediately—unlike rubber bushings that must compress first before the bar becomes functional. And there's no need for concerns about polyurethane squeaking; the frame bushings are easily greaseable via Zerk fittings in the bushing frame brackets. Order the model recommended for your vehicle. Additional details: * Cold rolled carbon steel construction * Tubular design to reduce weight * Utilizes stock mounting points for factory-like fitment * Durable black powdercoat finish * Hardware included
( 1 )
$294.95
$162.95
On Sale
Hooker Blackheart engine mount brackets are designed to bolt right in for ease of installation, provide excellent ground clearance, and optimize driveline angles, making your swap a good fit. The mounts are fabricated from steel to provide a strong and rigid foundation for your engine.
( 2 )
$216.95
$119.95
On Sale
Hurst transmission crossmembers are designed and fabricated from thick steel plate and heavy-gauge steel tubing for a perfect fit and finish. These bolt-in units are much stronger than the factory stock crossmembers and help maintain the correct transmission and driveshaft angles. Precision-cut and fully MIG-welded, they are given a durable black powdercoat finish to last a lifetime and give you peace of mind knowing you are buying the best for your transmission conversion. Trust the company that originally started out making conversion mounts back in 1958, Hurst Performance.
( 7 )
$377.95
—
$473.95
$207.95
—
$260.95
On Sale
Brothers Trucks offers quality parts and accessories for your classic truck restoration, including radiator retainer pads. These durable rubber pads are designed to cushion and isolate the radiator from vibration and damage. The radiator retainer pads are sold individually in upper or lower pad versions for compatibility for various early model Chevrolet, GMC, C/K Series trucks and Suburban. Order the pad replacements designed for your application needs.
( 1 )
$14.15
$7.78
On Sale
Lakewood combined their experience and the latest technology in drag racing to develop shocks and struts that are superior to all other drag shocks and struts available. They provide the correct weight transfer on the initial launch and then bring the front-end down quickly for aerodynamic purposes. This transfer will result in lower ETs and keep the rear-end loaded for maximum traction.
( 120 )
$259.95
$142.95
On Sale
Add more cubic inches and power to your vehicle with the help of Hooker Blackheart engine swap mount kits. The kits are available for most popular models of cars and trucks with a variety of popular engine sizes. They include all of the components you'll need, at a cost that won't break your budget.
( 69 )
$159.95
—
$330.95
$87.95
—
$182.95
On Sale
REKUDO front upper control arms are one part of a fully engineered suspension system for the 1970-81 Chevrolet Camaro and Pontiac Firebird. The systems are modern auto-cross inspired suspensions that retain the OE appearance and strength with stamped steel control arms. REKUDO front upper control arms feature an EDP coating, heavy-duty ball joints, offset washer inserts for easy caster adjustment, and factory-style rubber bushings. Gain better performance and an improved camber curve with REKUDO front control arm systems. Features: * Lowered center of gravity with improved handling * Easy caster adjustment with offset oval shaped washers that fit into the upper control arm pivot shafts—proper caster setup improves stability and driver confidence on corner entry * Heavy-duty ball joints and rubber bushings are pre-installed * Black EDP (Electro-Deposit Primer) coating for corrosion protection * Easy bolt-on installation utilizing the factory mounts Please note: * Must be used with tall spindles RK600-02 and 1968-82 C3 Corvette brakes. Ideal for use with all other REKUDO Suspension System components for the 2nd Gen F-body * Optional Delrin® bushings available separately (RK100-20) * C3 Corvette-style brakes require 15 in. minimum diameter wheels
Not Yet Reviewed
$641.95
$417.95
On Sale
Add an aggressive stance and appearance to your ride with REKUDO performance lowering spring sets. Their progressive spring design will drop the vehicle approximately one inch on both the front and rear for a lower center of gravity and improved handling. The REKUDO lowering springs designed for your application also save you money by working with the factory struts! More product features include: * Reduces/closes unsightly wheel opening gaps * Progressive spring design offers a slightly firmer ride vs. the originals for a sporty feel * Complete set of four coil springs for front and rear of the vehicle * Durable finish
( 2 )
$299.95
$164.95
On Sale
REKUDO front lower control arms are one part of a fully engineered suspension system for the 1970-81 Chevrolet Camaro and Pontiac Firebird. The systems are modern auto-cross inspired suspensions that retain the OE appearance and strength with stamped steel control arms. REKUDO front lower control arms feature an EDP coating, heavy-duty ball joints, offset washer inserts for easy caster adjustment, and factory-style rubber bushings. Gain better performance and an improved camber curve with REKUDO front control arm systems. Features: * Lowered center of gravity with improved handling * Easy caster adjustment with offset oval shaped washers that fit into the upper control arm pivot shafts—proper caster setup improves stability and driver confidence on corner entry * Heavy-duty ball joints and rubber bushings are pre-installed * Black EDP (Electro-Deposit Primer) coating for corrosion protection * Easy bolt-on installation utilizing the factory mounts Please note: * Must be used with tall spindles RK600-02 and 1968-82 C3 Corvette brakes. Ideal for use with all other REKUDO Suspension System components for the 2nd Gen F-body * Optional Delrin® bushings available separately (RK100-20) * C3 Corvette-style brakes require 15 in. minimum diameter wheels
Not Yet Reviewed
$605.95
$333.95
On Sale
REKUDO spindles are part of an autocross-inspired, fully engineered, modern suspension and brake system. The system retains the original equipment (OE) appearance and strength with taller than stock spindles for improved camber gain and the spindles provide a 1 in. drop for a lower center of gravity and improved handling. These spindles are forged 4140 chromoly steel construction with a black EDP coating for strength, durability, and corrosion protection, and they must be used with specific REKUDO components.
Not Yet Reviewed
$593.95
$326.95
On Sale
REKUDO offers front control arm Delrin© bushings for a variety of vehicles, including many Chevy Camaros and Pontiac Firebirds from the 1970s and '80s. The hard-plastic bushings don't deflect and are self-lubricated with PTFE for long-term, maintenance-free use. Smooth operation of the control arms provides more consistent and predictable handling. Each kit includes replacement Delrin© bushings, inner and outer steel sleeves (fits REKUDO and factory stamped steel control arms). The bushings are ideal for use in street performance, drag racing, track days, and autocross applications. Notes: * Includes extra components to cover both early and late 2nd Gen Camaro and Firebird applications * Long service life; bushings do not deteriorate, bind or squeak (as they age)
Not Yet Reviewed
$306.95
$168.95
On Sale
Body Armor 4x4 suspension leveling kits are the ideal way to quickly enhance the look of your vehicle. They're economical kits that create the perfect look by adding additional clearance to fit up to 35 in. tires and wider wheels for both 2WD and 4WD vehicles. Each leveling kit is engineered to retain a factory ride and is backed by Body Armor's Armor Guard warranty.
Not Yet Reviewed
$40.00
—
$138.00
$34.00
—
$117.30
On Sale
Upgrade your tunnel brace to improve rigidity and increase clearance to fit larger exhaust systems. Factory stamped steel tunnel braces unfortunately leave much to be desired. APR has redesigned these 6061 aluminum braces to sit slightly lower in the tunnel to allow for larger exhaust tubing. As an added benefit, the CNC-bent laser-cut braces add additional structural rigidity to the chassis! Tunnel brace model EXH0321 fits C7 chassis A6/7, S6/7, RS6/7.
Not Yet Reviewed
$109.95
$60.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
