Availability
Showing In Stock Items. Show All 244 Items.
Chevrolet Performance engine coolant crossover pipes are designed to vent the coolant to ensure that the coolant reaches the highest point on the cylinder heads and doesn't get blocked by an air pocket. They are manufactured from quality materials and install in the stock location for a direct fit.
( 6 )
$59.99
Whether you are replacing a rusted crossover pipe or doing a head swap, ICT Billet coolant crossover kits help increase the flow of coolant through the engine block, reducing engine temperature. They are made from aerospace-grade billet aluminum with a natural finish. By increasing the flow of coolant in the block, thereby reducing engine temperature, you can eliminate hot cylinders and detonation.
( 30 )
$52.99
—
$81.99
On Sale
Holley LS steam vent kits prevent hot spots or overheating. Designed to eliminate trapped air and steam from your engine, these complete kits are available to plumb your engine and include the appropriate hose and hose ends to make installation a breeze. They are more attractive than the OEM lines and offer increased flexibility when using aftermarket intakes and other accessories on your performance vehicle. Holley LS steam vent kits may feature: * Adjustable pivoting steam vent adapters * Black push-on or stainless braided Speed-Flex hose and hose ends * Available in front or 4-corner plumbing options
( 11 )
$62.45
When upgrading your LS-powered vehicle, don't forget to replace the factory steam tubes. Our Summit Racing™ Pro LS steam line plumbing kits eradicate trapped air and steam pockets from your engine to prevent hot spotting and overheating as well as provide more flexibility when using aftermarket intakes. Kits vent all 4-corners (except SUM-220952 and SUM-220952B kits) and contain black anodized billet aluminum fittings, steam port adapter, O-rings, stainless steel bolts, -3AN or -4AN hose and hose ends, (stainless steel hard lines and 5-port distribution block on SUM-220959 kit only) to make installation easy and more attractive than OEM lines, offering a cleaner look and better waterflow.
( 17 )
$74.99
The GM LS Series engines are being built for a lot of different performance and racing applications. You can see good ol' hot rodder ingenuity taking place as racers are running carburetors and even using distributors on these engines! These MSD LSx trigger converters plug into the factory crank sensor of an LS engine. They then convert the factory trigger signal into a 12 V square wave signal to trigger an MSD ignition control such as a 6 or 7 Series ignition control. If you are incorporating a front mount distributor into your LS engine, this means that you won't need to run an external crank trigger.
( 3 )
$52.69
Chevrolet Performance fuel rail covers are designed to give your Corvette engine added good looks under the hood. They are made of a durable, heavy-duty plastic material in black or red finishes.
( 4 )
$94.99
—
$96.99
On Sale
aFe Power Pro GUARD filter maintenance kits provide a comprehensive solution for maintaining peak performance in your diesel engine. Each kit includes all the filters necessary for timely services, eliminating the need to source components individually. Crafted from premium materials and designed to exceed OE standards, Pro GUARD filters protect your diesel engine from harmful, performance-robbing contaminants. Kit components vary slightly, but should include an engine air filter, oil filter, fuel filter, fuel/water separator, and diesel fuel booster. Some kits may contain a carbon cabin filter. Save time and money, select the aFe Pro GUARD filter maintenance kit designed for your diesel truck. Kit component features: * Engine air filters: -- The deeply pleated, high-quality filter media provides exceptional filtration capacity, effectively preventing harmful particles from reaching your engine and reducing wear. An additional foam pre-filter captures larger particles, preventing clogging and enhancing protection throughout its lifespan, making it ideal for dusty or extreme driving conditions. * Oil filters: -- Specifically designed to provide excellent filtration and efficiency while maintaining the high-flow rate demanded in diesel environments. The premium filter media is encased in a high-strength steel canister that features a 3/8 in. drive for quick and easy filter removal. * Fuel filter/water separators: -- Capture harmful contaminants such as rust and dirt, preventing damage to the fuel injectors and other engine components. These filters are designed to strike a perfect balance of filtration and flow ensuring your diesel engine remains protected and properly fueled. * Diesel fuel booster: -- Lubricates fuel system components and improves fuel stability, preventing rust and corrosion, ensuring peak performance and longevity from your diesel engine. Fuel Booster contains no alcohol and will not harm after treatment devices or EGR. * Carbon cabin filters (not in all kits): -- Ensures that your A/C functions properly, providing clean, fresh air to you and your passengers. The addition of activated carbon elements offers an extra layer of filtration, effectively combating odors and fumes from entering the cabin.
Not Yet Reviewed
$97.65
$87.89
aFe Power Pro GUARD fluid filter kits offer a complete solution for maintaining peak performance in your diesel engine. Each kit contains all the necessary filters for timely oil services, eliminating the need to source components individually. Proper maintenance of fuel filters, synchronized with the recommended oil change intervals, prevents the clogging of injectors and further wear on your engine. Save time and money, select the Pro GUARD fluid filter kit designed for your diesel truck. Kit component features: * Oil filters: -- Specifically designed to provide excellent filtration and efficiency while maintaining the high-flow rate demanded in diesel environments. The premium filter media is encased in a high-strength steel canister. * Fuel filter/water separators: -- Capture harmful contaminants, such as rust and dirt, preventing damage to the fuel injectors and other engine components. These filters are designed to strike a perfect balance of filtration and flow, ensuring your diesel engine remains protected and properly fueled.
Not Yet Reviewed
$63.00
Summit Bucks
Regular replacement of engine air filter elements is important for you and your car. Air filters trap airborne particles before they enter the engine. Excessively dirty filter elements decrease engine performance and increase fuel consumption. ACDelco Gold engine air filter elements use world-class filter technology to block 99 percent of airborne dust and dirt that can harm your engine--and they're available in panel and round styles to fit most vehicles. Benefits include: * Excellent filter capacity, enhanced efficiency, consistent flow management, and high durability for outstanding performance * The ability to trap microscopic dirt that can damage cylinder walls, pistons, and piston rings * Tight seals that help prevent unfiltered air from entering your engine * Sizes to fit virtually every car, light and heavy-duty truck, and SUV on the road today * Availability for virtually all makes and models * 12-month/12,000-mile limited warranty Round-style filters also feature: * A fine mesh screen to help reduce the risk of fire caused by engine backfires * Heat-resistant plastic on the top and bottom, with special sealing beads that provide a protective seal against automotive operating environments * A radial seal for easy installation on late model vehicles
( 126 )
$53.99
—
$88.99
BluePrint Engines offers throttle bodies for a wide range of applications, including many Chevrolet, Cadillac, GMC, Hummer, Saab, Dodge, Jeep, and Ram cars and trucks from 2009 and up. The LS compatible throttle bodies feature OEM quality, an 87mm throttle blade, and provide an excellent performance alternative to the pricey factory version. They're a great Gen IV swap candidate for engines using the 2009+ pinout and wiring. Tested by BluePrint on OEM vehicles, and used on LS3 and supercharged LS applications, let your LS breathe with one of these OE grade throttle bodies. Additional details: * 87mm throttle * Multi-port fuel injection * Drive-by-wire * 6-pin electrical connector - Gold Blade * Replaces: 12601387, 12629992, 2173151 * Used in factory GM Supercharged LS configurations * Can also be used to replace snout style TB 12605109, 19420707 as a space saver with tuning * Can be used as an OEM replacement, or as a swap throttle; however a throttle position reset of the OEM ECU is required for proper idle and drivability
Not Yet Reviewed
$104.95
Born from the speed team that built the first Comp car to break the 6-second quarter-mile, Lingenfelter Performance Engineering supercharger hubs give you the power to customize your machine even further. They allow you to change your spool up and boost properties by changing the size of pulley you have running your shaft. Different pulleys give you different boost, allowing you to let loose or reign in your beast of an engine with a simple pulley swap.
( 2 )
$65.50
—
$72.15
On Sale
Are you finding that the GM LT Series installation kit lacks some critical small parts to install the fuel system? VaporWorx is here to help. Aeromotive VaporWorx LT engine installation full kits provide exactly what you need to get the job done. Included: * Adapter fitting to convert the GM fuel module outlet to 6 AN * A 45-degree F-F swivel to start the turn to the side of the car * A 6 AN M-M union with an 1/8 in. NPT female thread on the side * Brass VaporWorx fuel pressure sensor adapter to attach the GM fuel pressure sensor. (M10 x 1mm O-ring thread to 1/8 in.-NPT male thread) * Genuine Delphi fuel module electrical plug kit
Not Yet Reviewed
$65.75
$59.18
Lingenfelter regulator plugs are designed to block off the internal fuel pressure regulator in the driver's side fuel tank when converting to an external fuel pressure regulator. These fittings are required to install an external fuel pressure regulator when your fuel system will run at reduced fuel pressures below 54 psi. They're also needed when your fuel system will be running the stock 58 psi fuel pressure but you're converting to a vacuum referenced regulator. The vacuum referenced system will drop below 54 psi of fuel pressure at idle, cruising, or under deceleration. When the fuel pressure drops below 54 psi, the transfer pump from the passenger side tank will no longer correctly function and will fail to transfer fuel. This situation will reduce the vehicle range and fuel system capacity. Since this transferred fuel also helps keep the canister full in the driver side tank, it may also cause the vehicle to lose fuel pressure under high power conditions. Order the block-off plug recommended for your vehicle. Additional notes: * Lingenfelter fuel pressure regulator block-off plugs are precision CNC-machined from aluminum and then anodized blue for added durability * General Motors switched the C5 Corvette fuel systems over to the C6 Corvette fuel system design halfway through the 2003 model year. Corvettes with the last 6 digits of the VIN being 114930 or higher were produced November 25, 2002 and later and have the new C6 style fuel system * These regulator block-offs should be used in conjunction with the Lingenfelter passenger side fuel tank block-off fitting
Not Yet Reviewed
$58.85
Delphi fuel injectors are engineered with an accurate, controlled spray pattern that reduces emissions and improves cold-start capabilities. These replacement injectors have a recessed fuel exit and no internal seal rings—in order to minimize leakage and possible puddling. Delphi fuel injectors are durable, dependable, and offered for a wide variety of applications. Order the OEM stock replacements designed for your vehicle.
( 9 )
$50.99
—
$106.99
Seal up your engine while looking good with one of these ICT Billet LS lifter valley covers. They are designed to fit (Non-DoD) engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.
( 71 )
$74.99
—
$99.99
Sturdy up your fuel rails! Whether you are building a custom fuel system or just updating your current system, FAST fuel rail mounting brackets allow you to bolt up your fuel rails quickly and easily. FAST is a leading developer of electronic fuel injection systems for the performance aftermarket.
( 4 )
$58.95
Summit Bucks
Top Street Performance mechanical fuel pumps are constructed of heavy-duty materials for consistent performance and reliability. Available in 2- or 6-valve models with a premium chrome or black finish, each pump features a lower body designed to rotate to meet your fitment requirements. Order the model designed your vehicle with the finish preferred.
( 51 )
$98.76
Summit Racing™ LS fuel filters with built-in regulator make it easy when getting more fuel to your engine. They are Corvette- style, 58 psi-rated fuel filter/regulators with a 5 nominal micron rating. The bypass design allows you to run one inlet with one outlet to the engine and a return outlet back to the tank. Summit Racing™ universal LS fuel filter regulators are ideal when performing a LS engine swap or any other fuel injection swap.
( 47 )
$64.99
Summit Bucks
ACDelco GM Genuine Parts fuel injectors are an electro-magnetic valve that meters fuel into the engine's intake manifold or cylinders for combustion, and is a GM-recommended replacement for your vehicle's original component. The engine management computer operates the injector by applying an electric current to the injector solenoid winding—this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. They are also offered in kits with the necessary parts, such as seals, clamps, and spacer.
( 6 )
$62.99
—
$74.99
Summit Racing™ mechanical fuel pumps are affordable replacements that deliver superior flow. They're available in two versions; one has 1/4 in. NPT inlets and outlets, provides 5.7 to 8 psi, and can free-flow 80 gph. That's twice what a normal pump delivers. The other has 3/8 in. NPT ports, delivers 6.5 to 8 psi, and can free-flow a hefty 110 gph. These pumps are offered in different finishes; and the lower housings of each unit can be rotated through 360 degrees for easy installation in tight spaces. Order the model recommended for your year/make and engine application.
( 518 )
$59.99
—
$75.99
Summit Bucks
ACDelco replacement fuel injectors help you to get maximum fuel efficiency and power from your engine. Properly operating fuel injectors are essential components for helping your vehicle run flawlessly. Replace any worn or faulty fuel injector with an OE-style model designed for your specific vehicle.
( 36 )
$53.99
—
$104.99
Lokar Hi-Tech throttle cables are available in stainless steel braided, black stainless steel braided, or black polyethylene housings. They're designed with a specially extruded liner for the extended life of the cable—not to be confused with ordinary braided brake hose. These cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying; and feature a "U-Cut-to-Fit" outer housing and stainless inner wire. The clevises are designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation. Each cable comes with installation instructions. Order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 661 )
$71.95
—
$114.95
On Sale
Holley EFI GM-style fuel filters have a built-in regulator to provide a simple and clean means to fueling your LS swap. Available with OEM-style or -6AN connections, they feature an internal regulator set at 58 psi, along with an integrated 5 nominal micron rated filter. The bypass design allows you to run one inlet with one outlet to the engine, and a return outlet back to the tank. Holley EFI fuel filter regulators are ideal when performing a LS engine swap or any other fuel injection swap that is designed to run at 58 psi of static pressure. Choose the fuel filter/regulator with the proper connections for your vehicle. Features: * All stainless-steel construction for improved corrosion resistance * Designed with one inlet, one outlet, and one return * Fixed pressure at 58 psi * Nominal micron rating: 5 * Can be used with other EFI systems that require 58 psi * Not recommended with fuel pumps that flow over 450 lph * Return line required for proper regulator operation
( 9 )
$77.15
$69.45
Lokar Midnight Series throttle cables have a PTFE inner liner and a black braided stainless steel jacket, along with aluminum clevis ends for smooth, no-bind cable operation. They can be easily adapted to fit most gas pedals and throttle assemblies. The cables are available in different lengths and cable end types; order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 108 )
$71.95
—
$106.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
