CAN-AM - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Red Line GL-5 Gear Oil

Red Line GL-5 gear oil has been engineered to provide the highest degree of protection and improvement of your differential efficiency. Formerly Lightweight gear oil, this new formula contains additional friction modifiers for suitability with clutch-type limited slip differentials, and for most, no additional friction modifiers would be required. This gear oil offers excellent lubrication, a high viscosity index, and the ability to lower operating temperatures, as well as exceeding API GL-5 specifications. Reduce friction for better performance--add the improved formula of Red Line GL-5 gear oil.

4.82 out of 5 stars ( 94 )

$23.53

—

$24.28

DragonFire Racing Bolt-In Harness Bracket Kits

DragonFire Racing bolt-in harness bracket kits allow you to properly mount harness restraints with the stock seat and cage configuration. Some rigs present problems when trying to mount shoulder straps and lap straps. DragonFire put these kits together to give you an all-inclusive and simple solution to mount your harnesses. These kits include two bolt-in tabs for shoulder straps and all necessary mounting hardware. The tabs are made for 3 in. wide harnesses and include Grade 8 hardware. Mount safety restraints without issues using DragonFire Racing bolt-in harness bracket kits.

5.0 out of 5 stars ( 2 )

$45.99

On Sale

Simpson UTV Seat Mounts

Simpson UTV seats make traveling the trails more comfortable and safer. To properly install any of their front driver, passenger, or rear bench seats you will need the correct vehicle-specific mounting rails. Simpson UTV seat mounts are offered for several Utility Terrain Vehicle makes to install Simpson Pro Sport, Vortex, or 170 Aggressor seat models. Choose the ones recommended your UTV and seat position.

5.0 out of 5 stars ( 3 )

$61.95

$41.27

All Balls Racing U-Joint Kits

All Balls U-joints are cold-forged from SCM-415 steel with HRC58-61 case-hardened and precision-ground journals for extra fortitude. The bearing cups feature a quad lip seal and centrally located grease Zerk and channels to evenly distribute grease and keep contaminants out. The U-joints are pre-greased with high-temperature Lithium Complex 3 grease—and a cap plug is included to eliminate grease Zerk in low-clearance applications. Replace the old, with the new high-quality All Balls Racing U-joint kits.

5.0 out of 5 stars ( 4 )

$28.13

—

$41.14

Eibach Pro-UTV Coil Spring Sliders

Eibach Pro-UTV coil spring sliders connect the main and secondary springs on your dual-spring setup. Constructed from ultra-high molecular-weight polyethylene, the sliders are offered in several sizes to fit a variety of shock/spring combinations. For a precision fit on your Pro-UTV suspension, choose Eibach performance accessories and hardware.

5.0 out of 5 stars ( 1 )

$23.00

Eibach Pro-UTV Spanner Wrench Kits

Eibach Pro-UTV spanner wrench kits are premium performance accessories. These tools provide positive engagement with an anti-slip grip. They are engineered to work with each model UTV shock collar.

3.0 out of 5 stars ( 2 )

$25.00

All Balls Racing Wheel and Carrier Bearing Seal Kits

All Balls Racing wheel and carrier bearing seal kits are hands-down the most complete line of bearing seal kits on the market! They are available in a wide variety of powersports applications, from ATV and off-road to street bikes. These All Balls Racing wheel and carrier bearing seal kits have premium high-speed bearings that feature low-drag, double-lip seals on both sides to provide superior exclusion of water and dirt and improved grease retention. High performance Chevron SRI-II grease features special rust inhibitors for the most demanding applications. Type TC nitrile elastomer wheel seals are specifically designed to keep out water and dirt. Their rubber coated outside diameter helps to create an optimum seal at the hub.

4.45 out of 5 stars ( 20 )

$25.01

—

$47.34

Extreme Metal Products Hand-Operated UTV Wipers

Extreme Metal Products hand-operated UTV wipers make riding through the mud and rain more enjoyable. These EMP universal-fit UTV wipers mount to hard coated polycarbonate windshields and are fitted with strong handles to let you swish away the elements. No longer do you have to stop and get out of your rig to clean the windshield when you have Extreme Metal Products hand-operated UTV wipers onboard.

3.8 out of 5 stars ( 5 )

$45.99

Hella High Performance Series Light Bulbs

High Performance bulbs from Hella produce a brighter, whiter light output that is closer in color and temperature to actual daylight. This provides increased visibility and less eye fatigue in all conditions. These bulbs are manufactured under Hella's stringent testing standards, ensuring correct filament alignment for maximum light output. Dozens of styles are available for more than 65 lighting positions. Order the replacement models needed for your application.

4.68 out of 5 stars ( 34 )

$23.99

All Balls Racing Carburetor Rebuild Kits

Revive your ride with All Balls Racing carburetor rebuild kits. Available for most any motorcycle, dirt bike, ATV, UTV, or snowmobile, their huge selection of kits will contain the components necessary to service your carburetor, restoring performance and reliability. Choose the kit designed for your motorcycle or off-road machine. Important features: * Intended for Closed Course Racing Only * NBR ethanol-resistant rubber material is used on all O-rings and rubber gaskets * High performance interface gasket material is used for all paper gasket applications

4.13 out of 5 stars ( 8 )

$34.79

—

$40.11

DragonFire Racing Battery Powered Removable LED Dome Light Kits

Have you ever been out in your UTV at night and noticed that it gets hard to see anything inside the cab? DragonFire Racing battery-powered removable LED dome lights are designed to be as useful as possible while staying simple. The lights are battery-powered, multi-function LED lights featuring a flood light top portion, side spot flashlight, magnetic backing, and a useful pop-out hanging hook. Don't get left in the dark again! Features include: * Mount made of 304 stainless steel * Simple two zip tie mounting system * Easy installation, no wiring required * Removable light can be used for flashlight * LED light provides long-lasting run times * Fits 1 1/2 in. to 2 in. diameter tubes * Available with all black or black/blue housings

3.0 out of 5 stars ( 1 )

$24.99

All Balls Racing Tie Rod Boot Kits

All Balls Racing tie rod boot kits are the ideal service kits. Made from materials designed to handle the difficult environments that your UTV or ATV faces, the kits meet and exceed OEM specs. Each kit includes both right and left tie rod boots and zip ties.

Not Yet Reviewed

$31.23

Clearance

Agency Power Quick-Release Clutch Cover Hardware Kits

Agency Power's quick-release clutch cover hardware kits are designed for the Can-Am Maverick X3 Turbo RS/DS/RR models. These hardware kits work by replacing the fixed bolts around the clutch cover with studs and secure clips. When a belt breaks, taking the clutch cover off your UTV can be cumbersome. Some of the bolts are in areas that are hard to fit tools in. With Agency Power's quick-release clutch cover hardware kit, removing the clutch cover now just takes pulling each pin and sliding it off. These kits use 10 clips with 10 pins to keep the clutch cover securely fitted without allowing water or potential harmful dirt into the clutch area. Product features: * Kit includes pins, lanyard, rivets, washers, and clips * Stainless steel CNC machined pins * Stainless steel lanyards * Change a belt much faster * Easy installation * Lanyards hold clips—so no lost hardware in the dirt during belt change

Not Yet Reviewed

$70.00

$49.50

All Balls Racing One-Way Clutch Bearing Kits

All Balls Racing one-way clutch bearing kits contain rubber sealed bearings for additional protection from water and dirt. Features: * Precision, high-speed bearings: -- Manufactured to ABEC3 standards -- Chevron SR1-2 grease with high performance rust and oxidation inhibitors -- Double lip seal—Type TC * Kit contents: -- Two ball bearings -- Two needle bearing shafts -- One snap ring -- Two springs

Not Yet Reviewed

$46.50

EBC SV Series ATV Brake Pads

EBC SV Series ATV brake pads are manufactured from high-density, sintered copper alloy for the longest possible life in utility applications on ATVs, especially in wet, muddy, dusty, and dirty conditions. These pads are designed for off-road applications.

5.0 out of 5 stars ( 2 )

$34.41

—

$47.88

Clearance

Agency Power Whip Light Mounting Brackets

Whip lights make your off-road machine distinguishable from others, allowing you to be identified, especially at night, and Agency Power makes the daunting task of mounting whip lights easy with their whip light mounting brackets. Simply bolt the heavy-duty stainless steel brackets to the factory roll cage and mount your whips! The sturdy construction can withstand the hardest of hits while keeping your whips secure. Agency Power mounting brackets also provide elongated slots to mount pod lights to the side of your machine. A bottle opener is also incorporated into the whip bracket for when you get back to the campsite to kick back and relax. Agency Power whip light mounting brackets feature a black powdercoated finish and laser-etched Agency Power logo.

Not Yet Reviewed

$35.00

$27.50

—

$29.50

EBC X Series Moto-X Brake Pads

EBC X Series Moto-X brake pads feature an organic Kevlar®-based material with a high percentage of carbon granules that keep pads and rotors cool. These pads are designed for off-road applications.

5.0 out of 5 stars ( 1 )

$36.27

—

$39.76

All Balls Racing Ball Joints

Put an end to premature ball joint failure by upgrading from your factory OE aluminum ball joints to these heavy-duty ones from All Balls Racing. Their quality design and construction meet the toughest standards and conditions, from daily commuting to full-on racing. The ball joints feature a heavy-duty steel case with POM-M90 bearing material for long life and are offered in a wide variety of applications, including some Kawasaki and Suzuki applications that require a costly A-arm or steering knuckle. All Balls Racing ball joints are sold per A-arm and come with a snap ring and cotter pins. Select the All Balls Racing ball joints designed for your vehicle application.

5.0 out of 5 stars ( 5 )

$32.78

—

$42.94

All Balls Racing Master Cylinder Rebuild Kits

All Balls Racing master cylinder rebuild kits stops the leaks. They contain all you need for the rebuild--copper washers, replacement screws, and where applicable, cup seals and O-rings. Service your master cylinder to maintain like-new performance with rebuild kits from All Balls Racing.

4.0 out of 5 stars ( 2 )

$25.76

—

$29.57

All Balls Racing Tie Rod Ends

All Balls Racing tie rod ends meet the toughest standards and conditions for everything from daily trail riding to full-on racing. These tie rod ends include the parts needed to replace one tie rod. Available for a wide variety of applications, including ATV and UTV applications, All Balls Racing tie rods include all of the parts needed to do the job right!

3.67 out of 5 stars ( 3 )

$24.06

—

$48.93

Hardline Products UTV Belt Mounts

Hardline Products UTV belt mounts will allow you to mount your spare UTV belt on your frame or roll cage on Cam-Am and Teryx and Polaris, Arctic Cat and Speed Cars. Don't be stuck on the trail because you didn't bring a spare drive belt. Be prepared for the unexpected. Get your UTV belt mount to carry your spare belt so "if" and when you need it, you'll have it. This is Hardline Products UTV belt mount only. Belt not included. Product features and specs: * Mount is machined from Structural Polyamide that will not corrode * Designed to fit all 1.87 in. to 2.00 in. tube frame or roll bars * Mount is designed to hold belts 1 1/4 in. to 1 1/2 in. wide * Large thumbscrews-easier to grip and turn * Includes molded foam pads for snug fit—will not scratch frame * Non-corrosive fasteners * Impact, fuel and fade-resistance * No tools required for installation of the mount and removal of drive belt (belt not included)

Not Yet Reviewed

$45.99

KFI Products 2 in. Receiver Hitches

Whether you ride one of the Polaris RZR XP, CAN-AM Maverick, or other utility models, these 2 in. receiver hitches from KFI Products are a great way outfit them. These 2 in. receiver hitches are constructed from durable steel for lasting service and, nd unlike all other hitch competitors, the KFI hitches are metal bead blasted before they're powdercoated, for the best possible finish prep for added durability. So, when it's time to hitch up and tow whatever you're hauling, choose KFI Products 2 in. receiver hitches.

5.0 out of 5 stars ( 2 )

$45.95

BikeMaster AGM Platinum II Batteries

BikeMaster AGM Platinum II batteries feature an absorbed glass mat technology that captures electrolytes. This means longer storage life and higher performance than standard wet batteries. They are permanently sealed after being filled, which makes them maintenance-free and non-spillable, with no need to constantly check or add water. They bring you greater cold cranking amps and longer service life to let you ride season after season with confidence. BikeMaster AGM Platinum II batteries are superior-quality you can count on during all riding seasons!

3.5 out of 5 stars ( 2 )

$25.99

—

$44.99

All Balls Racing Brake Caliper Pistons

All Balls Racing offers brake caliper pistons to replace damaged or corroded OEM caliper pistons. Plastic composite pistons are prone to damage and become brittle with age. OEM chrome plated steel and aluminum pistons are prone to corrosion. These brake caliper pistons are precision machined from high grade 304 stainless steel which reduces thermal conductivity by up to 93 percent compared to aluminum. Select the replacement brake caliper piston for your application, or get the caliper rebuild kit to save a few bucks.

Not Yet Reviewed

$26.57

—

$47.86

CAN-AM Parts and Accessories