Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
CADILLAC DEVILLE Bearings & Bearing Spacers
Showing In Stock Items. Show All 21 Items.
King HP-Series Rod Bearings
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 36 )
$61.99
—
$112.99
King XP-Series Rod Bearings
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 73 )
$84.99
—
$96.99
Sealed Power Main Bearing Sets
Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.
( 98 )
$112.99
—
$126.99
Sealed Power Connecting Rod Bearings
Sealed Power engine products are a complete system of application-engineered replacement components, including pistons, piston rings, engine bearings, camshafts, oil pumps, timing components and valvetrain products. Sealed Power connecting rod bearings are available with different linings to meet every engine's needs. They're made using either tri-metal or aluminum bi-metal construction for the utmost in performance and durability for all stock rebuilds and mild performance applications. Tri-metal alloys feature a steel base coated with a sintered layer of copper-lead alloy, followed by layers of electro-plated nickel and babbit to produce the ultimate bearings. Bi-metal aluminum types carry all of the same features without the babbit, as specified by many of today's top engine builders. Sealed Power bearings are available for a multitude of engines in sizes ranging from standard to 0.060 in. oversized.
( 8 )
$18.99
—
$112.99
Clevite P-Series Main Bearings
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 255 )
$68.99
—
$89.99
Sealed Power A-Series Rod Bearings
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 35 )
$72.99
—
$80.99
Sealed Power MA Series Main Bearings
These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.
( 76 )
$60.99
—
$161.99
Clevite P-Series Rod Bearings
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 297 )
$75.99
Kanter Main Bearings
Kanter Auto main bearings are available for a wide range of classic vehicles, including many Buick, Chevy, Oldsmobile, Pontiac, DeSoto, Plymouth, Dodge, Edsel, Ford, Mercury, Studebaker, GMC, Hudson, Cadillac, Lincoln, LaSalle, American Motors, Nash, and Jeep models. Main bearings hold the crankshaft in place within the engine block and allow it to rotate smoothly on a thin film of oil. Order the set recommended for your application. Product details: * The main bearings support the crankshaft as it rotates. * A thin film of oil flows between the rotating crankshaft and the bearing shells, preventing direct contact and reducing friction. * They are typically plain or journal bearings made with a steel backing and a thin lining of a bearing alloy. * The main function is to allow the crankshaft to spin with minimal wear and to absorb the tremendous forces generated by the engine. * Kanter Auto focuses on providing parts for older vehicles, including main bearings designed for specific makes and models from the classic and muscle car eras. They supply high-quality, precision-fit parts to help restore and maintain engine performance in these vehicles.
Not Yet Reviewed
$249.99
—
$283.99
Sealed Power Cam Bearings
Today's engines operate under very demanding conditions. Sealed Power has responded to this challenge with their babbit high performance cam bearings. They feature high embedability and conformability and a special "sacrificial" design that enables the bearing surface to deform under extreme loads, preventing any wear and damage to the camshaft.
( 118 )
$61.99
King SI-Series Rod Bearings
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 103 )
$16.99
—
$46.99
Kanter Rod Bearings
Kanter rod bearings are precision-made for classic cars to support the crankshaft, reduce friction between the rod and crank, and allow the piston's linear motion to become the crankshaft's rotation. These components are crucial for converting piston movement into crankshaft rotation, fitting into the connecting rod's "big end" with a cap, and relying on engine oil for a protective film. Kanter rod bearings come as two semi-circular halves (shells) that fit into the connecting rod and its cap. They are available in standard sizes, as well as undersizes to match worn crankshaft journals, ensuring smooth rotation and proper lubrication for vintage engines.
Not Yet Reviewed
$17.99
Enginetech Rod Bearings
Enginetech rod bearings are made of high-quality alloys, based on the application requirement. They are made on state of the art equipment, ensuring consistent bearing thickness for proper oil clearances, and parting line chamfers are precisely controlled, ensuring they are cut at the correct angle to allow for the proper amount of oil bleed-through without reducing oil pressure. The materials are high strength (load capacity), but also have good anti-friction properties (wear resistance, anti-seizure, and embeddability). Enginetech rod bearings provide extra protection and better durability within your rebuild. Select the size needed.
Not Yet Reviewed
$25.99
—
$137.99
Enginetech Cam Bearings
Enginetech offers cam bearings for a variety of applications, including many Chevy small block V8 engines from the 1960s, '70s, '80s, and '90s. Enginetech camshaft bearings are manufactured as a "full round" design. They're produced from extruded steel tubes with a centrifugally cast Babbitt lining. Several different grades of Babbitt are used depending on the application. Engines with inherent OE problems of bearing wiping and/or fatiguing utilize a high-grade ASTM-14 material. Order the replacement set recommended for your engine.
Not Yet Reviewed
$15.99
—
$18.99
Enginetech Main Bearings
Enginetech main bearings are made of high-quality alloys, based on the application requirement. Manufactured on state-of-the-art equipment, this ensures consistent bearing thickness for proper oil clearances, and parting line chamfers are precisely controlled, guaranteeing they are cut at the correct angle to allow for the proper amount of oil bleed-through without reducing oil pressure. Thrust washers are included, where appropriate, when they are not already molded into the main bearing. The materials are high strength (load capacity), but also have good anti-friction properties (wear resistance, anti-seizure, and embeddability). Enginetech main bearings provide extra protection and better durability within your rebuild. Select the size needed.
Not Yet Reviewed
$54.99
—
$163.99
Kanter Cam Bearings
Cam bearings provide a low-friction surface, supporting the cam shaft, allowing it to spin freely, and critical for proper engine operation. Kanter offers new cam bearings for old cars, covering all domestic makes and models from the 1930s to the 1980s. Made from quality materials, they will provide the proper fit and function to repair or restore your vehicle's operation. Available individually or in sets, select the Kanter cam bearing(s) needed.
Not Yet Reviewed
$44.99
—
$79.99
