Availability
BUICK ROADMASTER Ignitions & Electrical
Showing In Stock Items. Show All 77 Items.
Powermaster PowerMax Plus Starters
Powermaster PowerMax Plus starters are rated with high cranking torque and feature an offset gear reduction for increased performance. Their mounting blocks are made from durable billet aluminum and can be rotated in four positions to fit multiple locations. PowerMax Plus starters are available in either a natural or chrome finish and contain a tested dyno report in every box!
( 1153 )
$141.99
—
$230.99
On Sale
MSD 8.5mm Super Conductor Spark Plug Wire Sets
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 2007 )
$143.95
—
$158.95
$129.55
—
$143.05
Powermaster OEM-Style High-Torque Replacement Starters
Powermaster OEM-style high-torque replacement starters look like your OE starter, but pack a hidden surprise of high-torque cranking power! How do they do it? Easy--they combine an electric motor that is much stronger than a stock starter, high temp solenoid, and direct drive for serious torque. Hardware is provided for some applications, and some models also come available in a chrome plated finish.
( 468 )
$155.99
—
$238.99
PerTronix Ignitor® Solid-State Ignition Systems
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1011 )
$112.74
—
$189.92
BluePrint Engines Starters
BluePrint engine starters feature billet aluminum mounting blocks and their "clockable" models can be rotated or turned for special clearance needs. BluePrint uses high-quality internals for long-life and durability. BluePrint engine starters are trusted by engine builders worldwide!
( 37 )
$159.99
Powermaster Mastertorque Starters
With their gear-reduction drives, heavy-duty PowerMaster Mastertorque starters really crank out the power--180 lb.-ft. of torque. So they can handle engines with compression ratios as high as 14.0:1. If your stock starter clears your oil pan, they will, too. Some will also clear kicked-out pans. A selection of Mastertorque starters can be mounted in multiple orientations, and some will work inverted with the solenoid down. They feature a black wrinkle finish and select models are available in a chrome plated finish.
( 634 )
$188.99
PerTronix Ignitor II® Solid-State Ignition Systems
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 296 )
$192.15
—
$220.96
XS Power AGM Batteries
XS Power AGM batteries are some of the lightest racing batteries on the market. Independent test results have proven that they outperform other battery models that outweigh these power providers by up to 20 lbs. Cutting-edge lead acid battery technology produces more energy in a smaller space because each cell is compressed before case insertion, resulting in efficient power-producing packages that are completely sealed with no need to ever add water. This design is ideal for the abuse of racing, making these the batteries of choice for demanding racers and Monster Truck drivers who need top performance and reliability. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power AGM batteries best suited for your application. Product features include: * Designed to be an inch shorter than what the competition offers for fitting in places where space is at a premium * Deep-cycling ability and ultra-low internal resistance results in high cranking amps and excellent vibration resistance * Variable position mounting (except upside-down) thanks to the no-spill design * Offered in 6 V, 12 V, 14 V, and 16 V models
( 289 )
$229.99
—
$239.99
Proform High-Torque Starters
Proform high-torque starters are 100 percent new, not rebuilt. They feature an offset design that results in more clearance between the oil pan and the starter. The powerful units are offered in a variety of styles, finishes, and other options for both manual and automatic transmission applications. These replacements are available for countless vehicles from the 1950s and up.
( 123 )
$127.99
—
$212.99
PerTronix Ignitor Lobe Sensor Solid-State Ignition Systems
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 210 )
$132.97
—
$149.30
PerTronix Ignitor III® Solid-State Ignition Systems
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 85 )
$195.96
Proform High-Compression Racing Starters
Are you building a high-compression, high-horsepower engine? Then you're going to need one of these Proform high-compression racing starters. They're 100 percent new, not rebuilt, and are built from scratch with all-new components. Their torque rating is a healthy 4.41:1 gear reduction, capable of cranking engines up to a whopping 14:1 compression ratio. The Proform high-compression racing starters feature an offset design that results in more clearance between the oil pan and the starter. They're available in models for thousands of applications, from 1955 and up.
( 55 )
$143.99
—
$148.99
PerTronix Ignitor II® Lobe Sensor Solid-State Ignition Systems
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$197.63
Top Street Performance Alternators
Whether it is for their great looks or their reliable high-amperage output, Top Street Performance alternators are great additions to your engine. TSP's alternators produce amperage outputs significantly above stock and are perfect for vehicles with a lot of accessories and equipment. These internally regulated units are available in serpentine or V-belt pulley styles with black or chrome finishes to complement your engine compartment.
( 32 )
$149.95
—
$186.58
Powermaster Street Alternators
Powermaster street alternators feature all of the quality construction and dependability the company is famous for. The "electrical generators" are available in a variety of amperages and styles, allowing you to choose the best model for your specific ride and the accessories you run. So whether you need an alternator for your truck, hot rod, musclecar, sport compact, or audio competition vehicle, Powermaster gives you the power you need to get it started and keep it going.
( 1846 )
$172.99
—
$234.99
Powermaster XS Torque Starters
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 918 )
$228.99
FAST XDi Street HEI Distributors
FAST XDi Street HEI distributors include the industry-first gear technology with an upgraded module and coil that ensure clean ignition firing up to 8,500+ rpm. Ideal for SB and BB Chevy engines, each of the XDi distributors feature a plasma nitrided gear compatible with all popular camshaft materials, including cast iron, austempered iron, 5160 steel, and even 8620 steel. The special plasma nitride process used on the gears not only increases the gear's surface hardness, but also the "slickness" of the gear teeth reducing friction and increasing cam/distributor gear life, as well as making them superior to common melonized gears. XDi Street HEI distributors also feature powerful 6-amp ignition modules that drive custom-wound performance coils up to 50,000 V, providing the hot spark needed for maximum horsepower. While ready to run out of the box, for those that enjoy tuning the mechanical and vacuum advance mechanisms for better throttle response and fuel economy, FAST XDi Street HEI distributors include springs, advanced limit plate, and instructions needed to adjust the distributor for your particular engine/vehicle combination.
( 21 )
$191.95
Powermaster PowerMax Starters
With their gear-reduction drives, heavy-duty Powermaster PowerMax starters really crank out the power--180 lb.-ft. of torque. So, they can handle engines with moderate compression ratios. If your stock starter clears your oil pan, the Powermaster PowerMax starters will, too. Some will also clear kicked-out pans. Powermaster PowerMax starters can be mounted in multiple orientations to fit your needs. Starter dyno reports are included.
( 328 )
$172.99
CVR Protorque Starters
With 1.9 hp and a 4:1 gear reduction ratio, these CVR Protorque starters are sure to get your engine cranking. These starters feature a unique aluminum housing to eliminate hot start problems and are adjustable (where applicable) to help clear suspension parts, oil pans, and exhaust systems. These CVR Protorque starters are sealed units with rubber O-rings and grommets and also have easily replaceable plungers and contacts.
( 163 )
$229.99
Davis Unified Ignition Dyna-Modules
Replace your stock HEI module with Davis Unified Ignition Dyna-modules for a crisper, smoother running engine. They have more electronic dwell than your stock, so the coil saturates longer and produces a more intense spark. Dyna-modules are available in different pin quantities to meet your application, and mount easily on the side of your distributor housing with minimal wiring. Quicker starting, better throttle response, and more low-end power can be gained with Performance Distributors Dyna-modules.
( 136 )
$112.50
On Sale
ACCEL Points Eliminator Conversion Kits
ACCEL points eliminator ignition conversion kits utilize specialized electronic circuitry and an infrared signal to stabilize ignition timing from 1 to 10,000 rpm and offer more accuracy. Put an end to your old-school high-maintenance system with the ACCEL points eliminator conversion kit designed for your application. More product features include: * Reduces maintenance by eliminating the need to change points * Improved performance and fuel efficiency * Latest thermal, clad-based surface-mount construction for maximum dependability * Easy to install with simple hand tools
( 53 )
$116.95
Davis Unified Ignition LiveWires
You need a good spark to make good energy and power. Davis Unified Ignitions LiveWires are spark plug wires that deliver the spark that you need for the energy that you want. Made with space-age, non-flammable, heat-treated glass braid, LiveWires provide heat protection up to 1,400 degrees F and offer excellent resistance to moisture and chemicals. They feature a spiral-core stainless steel wire wrapped around a magnetic core, offering extremely low-ohm resistance for optimum spark travel. And there is no radio interference, enabling them to work well with delay boxes and stutter boxes. LiveWires have a durable silicone jacket and insulation with heat-shrink applied between the boot and sleeving to keep dirt and moisture away from the wire terminals. Another excellent feature of these custom-fit, ready-to-go wires is that they're foolproof. Each wire is numbered on both ends for the correct cylinder—making installation, removal, and reinstallation hassle-free. LiveWires are available in eye-catching colors to match the sparking power that they provide. Quality wires are more than just wire and coverings. Make sure that you're wired to fire with LiveWires from Davis Unified Ignition and Performance Distributors.
( 465 )
$149.00
American Autowire Breakerless Se Ignition Systems
American Autowire Breakerless Se ignition systems are made with the highest quality materials to ensure long-lasting durability and performance. They are designed to operate with early model GM vehicles. If it's time to update or upgrade your ignition system, American Autowire Breakerless Se ignition systems are the way to go.
( 21 )
$213.75
ACDelco Alternators
Losing power? ACDelco alternators can power up your vehicle's electrical systems and charge the battery while the engine's running. They're direct replacements for your factory originals and are manufactured using ISO quality standards. With 100 percent new components and engineering enhancements, they provide improved performance, efficiency, and service life for your vehicle. Almost like your originals, but just a little bit better--ACDelco alternators. Order the model designed for your vehicle application.
( 172 )
$102.99
—
$136.99
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster