Availability
Showing In Stock Items. Show All 92 Items.
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 426 )
$73.69
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 997 )
$99.95
MSD Blaster coils give your GM maximum voltage output! With windings and construction similar to MSD's Blaster 2 coils, these have an increased turns ratio, plus lower primary resistance than your stock coils. The Blasters will work with stock GM coil ignition systems, as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your GM ignition system? Just bolt in one of these MSD Blaster Coils.
( 87 )
$78.15
MSD puts their years of experience to work in making these top-notch iron distributor gears. Their high grade, ductile iron is micro polished for a smooth and scuff-free finish then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these oversized gears for tighter mesh between the camshaft and distributor drive gears.
( 58 )
$59.25
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 196 )
$52.69
—
$72.69
When you turn the key and your vehicle is slow to turn over—or worse, there's no ignition at all—one of the prime suspects is a faulty starter. Getting the engine up and running for each drive begins with this unit, so it's wise to trust your replacement parts to ACDelco. The aftermarket parts giant manufactures starters to precise OE specifications for perfect fit and performance on virtually any vehicle on the road today. Don't wait until a weak, aging starter fails completely; install an ACDelco product …and turn the key with confidence!
( 195 )
$95.99
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 618 )
$83.65
Taylor Street Thunder spark plug wire sets offer great performance at an affordable price. They feature 8mm diameter black silicone construction with synthetic jacketing to resist heat, oil, and abrasion. Their 500 ohm per ft. resistance delivers greater spark energy, while improving power and fuel efficiency. By using a Kevlar® helically spiral-wound core conductor, Street Thunder wires provide greater strength and durability to suppress electromagnetic and radio frequency interference. Matching black silicone boots protect against high exhaust temperatures and double spring locking terminals make quick vibration-proof connections. Taylor Street Thunder spark plug wires are available in universal, race-fit, or custom-fit styles. Select the set that best suits your application.
( 439 )
$50.90
—
$61.95
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 511 )
$53.75
The little devil in you will enjoy tormenting the competition with Davis Unified Ignition extreme Screamin' Demon coils. They allow you to widen your plug gaps up to a whopping .065 in. You get an intense spark through the entire rpm range to keep you "screaming" down the road without a loss of power. And your spark plugs stay cleaner longer! The brass terminals of these coils are more conductive than stock aluminum and resist corrosion longer, too. Demon coils are hot stuff and you'll need a better-than-stock set of wires to deliver that hotter spark to your plugs. So, turn up the heat on performance with Screamin' Demon coils from Performance Distributors.
( 213 )
$84.99
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 27 )
$50.99
—
$59.99
The new standard in ignition wires for racers on a budget! Moroso Ultra 40 unsleeved custom-fit ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection. Features: * Kevlar® core that's four times stronger than Aramid cores * Class-leading 40 ohms of resistance per foot * Nickel copper alloy conductors for superior spark energy transfer * Extra-thick EPDM layer for greater dielectric strength * High-temperature silicone boots that can withstand heat up to 600 degrees * Locking stainless steel plug terminals
( 135 )
$90.27
—
$112.99
ACCEL adjustable vacuum advance canisters for GM points V8 are designed to give you instant horsepower and throttle response. They permit infinite adjustment to both the amount and rate of advance. The advance chambers include an adjustment wrench and an instruction guide. To optimize your engine's timing curve, you need ACCEL adjustable vacuum advance chambers for GM points V8.
( 21 )
$59.25
ACCEL points ignition tune-up kits offer point sets equipped with extra-thick contact arms to prevent flexing at high rpm. They also feature high-strength phenolic rubbing blocks for superior durability when used with heavier spring tensions. Performance condensers contain special mylar/foil windings to protect your points from pitting. Whether you're looking for the standard or heavy-duty version, ACCEL points ignition tune-up kits are sure to offer long life and great reliability for your classic ride!
( 23 )
$72.49
ACDelco Gold manifold absolute pressure sensors are high-quality replacements for many vehicles on the road today. MAP sensors are part of the fuel and engine management system, measuring the intake manifold pressure. Their signal is used by the engine control module, along with the throttle position sensor, to calculate the amount of air entering the engine--so that the correct amount of fuel is injected for optimum combustion. Order the model recommended for your application.
( 8 )
$72.99
Replace your stock HEI module with Davis Unified Ignition Dyna-modules for a crisper, smoother running engine. They have more electronic dwell than your stock, so the coil saturates longer and produces a more intense spark. Dyna-modules are available in different pin quantities to meet your application, and mount easily on the side of your distributor housing with minimal wiring. Quicker starting, better throttle response, and more low-end power can be gained with Performance Distributors Dyna-modules.
( 124 )
$74.99
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 369 )
$51.99
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 659 )
$94.40
—
$105.00
These Extreme distributor caps from MSD are replacement covers designed to be installed on stock HEI distributor cams with no modifications.
( 8 )
$86.99
ATP Automotive provides one of the widest product offerings of automatic gear-shifting control products, including transmission wiring harnesses, for most import and domestic vehicles. ATP designs and manufactures them to meet or exceed the OEM specifications to properly control your drivetrain. Get exact-fit, no-compromise replacement parts when you order the ATP automatic transmission wiring harnesses designed for your application.
( 1 )
$81.99
—
$91.99
On Sale
Increase your throttle response, idle quality, and starting with these ACCEL remote Super Coils with included hardware. They feature higher energy output for top rpm power and work as direct bolt-in replacements. Super-charge your vehicle's energy requirements with the ACCEL remote Super Coils designed for it!
( 80 )
$86.77
$65.08
—
$86.95
MSD offers universal wiring harnesses to simplify the installation of a MSD 6 Series box on late model vehicles. The harnesses plug in between the ignition coil and the factory coil connector. Four wires with corresponding colors and matching connectors then connect directly to the MSD 6 wires. These harnesses reduce the installation time, reduce or eliminate cut wires, and allow you to quickly convert back to the factory ignition.
( 48 )
$77.15
—
$79.09
FAST PS20 performance ignition coils feature a special E-core design, which loses less voltage, so more spark gets to your plugs. The coils also have large-gauge wire windings for maximum spark current and voltage, with better heat dissipation at high rpm. An insulated connector and high-tension tower protect against high-voltage arcing. They're also solid-epoxy encapsulated for shock and vibration protection.
( 12 )
$55.95
Your distributor will need upkeep to run at top performance. MSD Street Fire cap and rotor kits can help maintain its optimum operation. Manufactured with brass terminals and a heavy-duty rotor, these MSD kits offer big performance at a not-so-big price. MSD Street Fire cap and rotor kits are available for several GM and Ford applications. So, if you're in a budget frame of mind, choose quality-built MSD Street Fire cap and rotor kits.
( 136 )
$52.69
Modal Header