Availability
Building a really high performance street vehicle? COMP Cams Magnum double roller timing sets are built for maximum performance on the street. They have heat-treated, pre-stretched, large-pin, double-row chains for extra strength and reliability. They also have an induction hardened cast iron camshaft gear and billet steel crank sprocket with three keyways, which allow you to set cam timing at 4 degrees advanced, 4 degrees retarded, or normal. In addition, all COMP Cams Magnum double roller timing sets are dynamically balanced for smoother operation.
( 238 )
$88.95
COMP Cams rocker shaft retainers and bolts contain the hold-down retainers and bolts to secure both rocker arm shafts. They are manufactured to OEM Mopar specifications to ensure the highest quality. The retainers and bolts will fit all cylinder heads with cast-in rocker arm stands.
( 7 )
$81.95
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 36 )
$103.99
—
$109.99
Give your Mopar some much needed attention with Proform and their heavy gauge factory replacement timing chain cover. Having your choice of finishes, you're sure to put a smooth look to the front of your engine. It even comes with the factory crankshaft seal pre-installed.
( 19 )
$52.95
COMP Cams High Energy timing sets are a solid choice for many applications. They are designed to meet or exceed all OE specifications, which makes them a good selection for RVs, street rods, or daily drivers.
( 27 )
$52.95
King AM-Series rod bearings are recommended for street or marine applications. They have superior embeddability, which provides greater macro-particle and reduces scratching of the crank journals and tearing or weakening of the Babbitt overlays. The direct replacements feature tolerance control up to +/- .0001—and they're lead-free, making them environmentally friendly and user-safe. Order the King AM-Series rod bearings in the application designed for proper fitment with your vehicle.
( 28 )
$50.99
Clearance
Mahle is the world's largest manufacturer of piston rings. Their tremendous research and development and extensive OE connections mean that Mahle Original standard piston ring sets have the technological edge. Things like narrow compression rings, steel compression rings for gasoline engines, low-tension oil rings, and coated compression rings for diesels all came from OE. Mahle's entire Original line proves time and again that it should be the ring of choice under every hood - regardless of the application. Mahle Original standard piston rings offer high tensile strength, high yield strength, and excellent hardness with low ring mass. These factors lead to stress resistance, minimal groove pound-out, long service life, cylinder conformability, oil economy, and good blow-by control with low friction. Whether you're repairing a modern computer-controlled engine, or rebuilding an older engine, be sure to specify Mahle Original standard piston ring sets (formerly Perfect Circle) … trusted by professional automotive technicians for over 100 years.
( 11 )
$75.99
—
$102.99
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 53 )
$59.99
—
$101.99
Hastings Steel Series Performance ring sets put the performance in your mind in your engine! With them, you can expect better oil control, longer engine life, and confidence—from the moment you start. Their alloy steel material allows for reductions in compression ring cross-sectional dimensions--both axial height and radial width. These rings decrease the engine's reciprocating mass, and can be fitted to the latest designs of lighter, reduced deck-height pistons with restricted ring belt areas. Hastings Steel Series rings are a must for high performance sport compact and late model race engines. Order the set that best matches your application. Features, items, and specs: * Top and 2nd rings offered in increasingly thinner axial heights * Durable alloy steel top rings available with torsional or barrel-faced shapes * Top compression rings available with either plasma moly impact-resistant alloy (SM) or chrome (SC) coatings * Second groove rings feature either torsional reverse-twist taper cast iron or Napier-faced ductile iron construction with a phosphate coating * Chrome-plated, Flex-Vent oil rings made from 1070 segmental steel rails with 201 stainless steel expander
( 6 )
$102.99
PRW Platinum Series shaft-mount rocker arm systems fulfill the needs of successful racers and performance engine builders at every level. The Performance Quotient PQx rocker arms are made from quality alloy extrusions. These systems include CNC-machined billet steel pedestals, and ground, steel alloy rocker shafts—along with PRW SCM-4135 alloy steel fasteners, studs, and bolts. PRW Platinum Series shaft-mount rocker complete kits include all the components and hardware required for a professional installation. Order the system recommended for your specific vehicle and engine size. Features, items, and specs: * Several systems to suit many cam profiles * 8 pairs of shaft-mount rockers with adjustable cup-style valve lash adjusters * SAE 42100 full complement precision needle and cage roller bearings * Rated up to 750 lbs. open spring pressure * Internal oiling system for long-lasting performance
( 10 )
$50.03
These COMP Cams rocker arm shaft spacers are designed to allow the engine to rev higher and reduce the possibility of parts breakage. They are used on engines with adjustable rocker arms to improve valve tip alignment.
( 1 )
$89.95
King HP-Series main bearings are recommended for street and strip performance applications. They're designed for blown, turbocharged, NOS, and alcohol-fueled engines using aftermarket crankshafts. These main bearings have greater eccentricity for superior oiling at high rpm, and a chamfered surface for large radii crankshafts. HP-Series bearings also feature large, chamfered oil holes—and are available in 1/2 grooving for improved oiling to withstand high-rpm applications. Order the bearings designed for fitment with your specific engine.
( 48 )
$97.99
King AM-Series main bearings are recommended for street or marine applications. These crankshaft bearings have superior embeddability, which provides greater macro-particle to reduce scratching of the crank journals and tearing or weakening of the Babbitt overlays. King AM-Series main bearings feature tolerance control to within plus or minus .0001—and they're lead-free, making them environmentally-friendly and user-safe. Hundreds of performance sets are available; order the replacement bearings designed to fit your vehicle.
( 32 )
$80.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
