Availability
The best just got better! Injector Dynamics ID1750x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1700 and X Series, these fuel injectors are a drastic improvement over previous series from Injector Dynamics. Compared to the 1700, the 1750x offers: higher dynamic flow rate with no increase in minimum fuel mass, better cylinder to cylinder balance at low pulse widths, and improved pressure sensitivity—all while retaining the same "compatible with everything but dirt" corrosion resistance that made the ID1700 famous. Plus, a unique magnetic circuit, resulting from a lengthy development program, makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. Order the set of fuel injectors recommended for your vehicle. Key features and benefits include: * Compact body design allows fitment in a variety of applications * Higher dynamic flow rate with no decrease in minimum fuel mass * Better cylinder to cylinder balance at low pulse widths * Improved pressure sensitivity * Corrosion resistance makes these fuel injectors compatible with Methanol/Ethanol/MTBE/Nitromethane and all known Hydrocarbon fuels * Unique magnetic circuit makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors * Narrow spray pattern—minimal wall wetting promotes quick response and smooth running * Does not require extended linearity at low flow rates
Not Yet Reviewed
$1,814.40
—
$1,827.00
Snow Performance Stage 2.5 N54/N55 direct port water-methanol injection systems are engineered specifically for BMW models with N54/N55 engines. These systems can increase your pump gas octane by 25 points and makes more power efficiently with a cooler running engine! The Snow Performance Stage 2.5 N54/N55 direct port systems come complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings, offering un-surpassed quality, reliability, performance and ease of the installation. In addition, Snow Performance direct port injection plates are the easiest, and the best-way to mount the water-meth nozzles on BMW N54/N55 engines. Simply fit between the head and intake manifold and enjoy the placement of six Hyper-Sonic nozzles right where you need it! Additional features and benefits include: * The Stage 2 uses a progressive VC-50 controller that proportionally injects more or less according to boost pressure * Start and full points are adjustable for engagement and delivery curve to match what the engine requires * Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol, and allows cooling and performance improvements over a wide range for improved drivability * The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller--all in one! * 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) LED screen displays boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes, allowing you to tailor the controller to match your OEM gauges or mix and match up to two colors Snow Performance N54/N55 direct port kit includes: * Direct Port Injection Plate * OEM O-ring gaskets to seal between injection plate and head * Required hardware for installation * Hardlines plumbed to distribution rail * Six No. 2 nozzles installed in plate * High-flow water methanol solenoids * N54/N55 engine specific boost tap * Everything needed for installation
Not Yet Reviewed
$1,503.90
SPEC Super Twin multi-disc clutch and flywheel kits are designed for street and track use in vehicles with extreme horsepower and torque (700 to 1500 lbs.-ft.). They offer near-stock drivability, tremendous life expectancy, a no shimming/setup bolt-in installation, and maintenance-free operation. With their all-billet construction, these assemblies are smooth and quiet. Super Twins are constructed with aircraft-grade aluminum and high-carbon billet steel milled to industry-leading .001 in. tolerances for perfect balance and actuation. Friction is provided by dampened, full-faced, carbon-graphite discs. Additional features of SPEC Super Twin multi-disc clutch and flywheel kits: * Organic, fiber, and full-metallic versions are also available * Flywheel and track-spec hardware are included in each kit * Rebuildable by SPEC or the end-user * Replacement components are always available * Ideal for all types of use, including: street, drag racing, drifting, road racing, time-attack, pulling, and rally
( 3 )
$1,520.10
—
$1,889.10
ST Suspensions ST XTA coilover kits feature KW damping technology, which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with more track stability and reduced body roll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, these ST XTA coilover kits feature an aluminum adjustable top mount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.
( 1 )
$1,649.00
—
$1,799.00
Injector Dynamics ID1300x fuel injectors are high-flow models with characteristics specific to the needs of motorsport tuners. You get superior flow without sacrificing idle and cruising performance in low fuel demand situations. This perfect balance between reliability and performance makes the 1300x Series one of the most popular options in today's motorsports. These injectors not only work with gasoline, but any ethanol fuels your engine is tuned for. The stainless internals prevent corrosion, add durability, and provide dependable flow in high performance engines. Order the ID1300x fuel injectors recommended for your vehicle.
( 1 )
$1,890.00
Dinan high-flow air intake systems consist of an injection-molded replacement lid for the stock air box—designed to increase overall volume and accommodate a high-flow filter element for optimum intake airflow. The lid is manufactured using a special composite material, specifically chosen for its ability to resist power-robbing underhood heat. The lid also incorporates an O-ring, completely sealing the air box for maximum pressurization and further insulation against heat-soaking—optimizing performance under varying driving conditions. They also include a secondary intake duct that scoops up additional cool, oxygen-rich air via the factory brake cooling duct, further improving performance as road speed increases.
Not Yet Reviewed
$1,699.95
On Sale
Dinan offers a wide range of exhaust upgrades for imports like BMW, Audi, and Volkswagen. Their free flow stainless exhaust systems are precision-engineered for optimum power gains—with a civilized, sporty exhaust note that's appropriately aggressive at wide-open throttle. Plus, there's no irritating low-rpm "drone" that is common with so many other aftermarket mufflers. These free flow systems are manufactured from stainless steel, inside and out, for maximum resistance to corrosion and reduced weight (by 30 percent). They utilize the OE brackets and hangers for mounting in factory-like fashion. Order the Dinan free flow stainless exhaust system designed for your vehicle application.
( 4 )
$2,499.95
$1,559.95
—
$1,999.95
XClutch Stage 1 clutch kits offer a variety of performance upgrades for both street and track applications. They are designed in-house and normally utilize a single plate organic, ceramic, or carbon friction disc along with an upgraded factory-style pressure plate. XClutch kits utilize a similar mechanism to the factory clutch, making them ideal enhancements for most vehicles with low to mid-level performance modifications. Stage 1 clutch kits are available in three distinct performance clutch packages—sprung, rigid solid, and steel-backed organic. Features and benefits of each: * 1A sprung organic—this range has been specifically designed for street vehicles that have minor engine and general performance modifications. These kits offer a sprung organic friction disc that allows for great drivability, while offering improved clamping force through the use of a performance pressure plate. * 1G rigid solid organic—with a rigid center version of the organic disc, this range is ideal for street vehicles and light track use. These kits are often available with a lightweight alloy pressure plate and performance flywheel. * 1T steel-backed organic--this range offers a higher burst strength by bonding the organic friction material directly to a steel backing plate. These kits are ideal for high performance vehicles used on the street with occasional track use.
( 5 )
$1,862.95
—
$2,162.32
These Sikky Manufacturing engine swap kits will help complete the exchange. We offer a large range of kits with the components that will make your build a success. Most kits, but not all, may include 304 stainless steel headers, mount mounts, crossmember, aluminum oil pan and pickup, gaskets, and hardware. Choose the kit packaged for your vehicle.
Not Yet Reviewed
$2,118.40
Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.
( 930 )
$1,891.99
Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems. ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.
( 155 )
$1,813.99
KW Variant 1 coilover kits are optimally adjusted for sporty driving, comfort, and safety. They enable you to drop your ride's center of gravity and customize the height at all four corners. KW Variant 1 twin tube coilover kits are designed with shorter INOX-Line stainless steel strut housings for more spring travel, anodized aluminum spring collars for durability, and high-tensile racing springs for strong support and comfort. Order the model with options recommended for your vehicle.
( 1 )
$1,524.00
—
$2,184.00
Clearance
The downsizing of modern passenger car engines enables reduced fuel consumption and CO2 emissions, but can also increase rotational irregularities and natural vibrations. Torsional vibrations transmitted to other components in the drivetrain diminishes comfort and may even lead to component damage, therefore effective vibration damping is essential. LuK dual mass flywheels (DMF) reliably dampen torsional vibrations in the powertrain and ensure high gearshift and driving comfort in all speed ranges. Unlike a conventional flywheel, DMFs consists of two masses which are mounted to rotate against each other. A damping system in the form of arc springs is integrated to almost completely absorb the torsional vibrations of the engine. Precisely matched to the respective vehicle, each LuK DMF enables low-speed driving and ensures lower fuel consumption, as well as reduced emissions. Order the proper size for your vehicle.
( 12 )
$1,636.99
—
$1,761.99
If raw and rowdy are your speed, AWE Tuning Track Edition exhaust systems will satisfy your desires. These aggressive sounding systems are offered in handcrafted and CNC mandrel-bent T304L stainless steel cat-back and cost-effective axle-back options. Each system is completed with adjustable tips (allows depth into the bumper to be set according to personal taste) in chrome or diamond black. AWE Tuning Track Edition exhaust systems are not for the faint of heart and cannot be returned due to sound preference. Choose your AWE Track exhaust wisely!
( 2 )
$1,755.00
—
$2,165.00
EBC offers Stage 26 Kits with Yellowstuff brake pads and SG2 rotors for a variety of Nissan, Audi, Tesla, BMW, Honda©, Audi, Lamborghini, Lotus, Ford, Volkswagen, Mitsubishi, Chevrolet, Dodge, SRT, Buick, Pontiac, Genesis, and Kia cars and trucks from 2003 and up. These convenient Race disc brake combos enable you to save time, money, and the hassle of matching up compatible parts. The high-efficiency EBC pads and fully floating 2-piece brake rotors inject a new level of quality to high performance brake components; in fact, the high-friction pads vastly improve stopping power over OE pads. Each combo is designed to integrate with the OE calipers and pads with no vehicle modifications necessary. EBC kit components are available in many size options to ensure proper fit on your application.
Not Yet Reviewed
$1,723.08
Hella headlight assemblies are OEM-style replacements for vehicle-specific applications, including models from BMW, Volkswagen, and Mercedes-Benz. Select the assembly designed for precise fitment on your car.
Not Yet Reviewed
$1,531.99
—
$1,723.99
Bilstein EVO S Series coilover systems are the next step in the evolution of performance suspension tuning. They feature ride height adjustability in an OE quality, direct-fit package. Redesigned components allow for up to 70mm of lowering on a set of high-quality threaded performance dampers. Greater stability, traction and higher cornering speeds are achieved through specific application tuning. Bilstein EVO S Series coilover systems are designed and built with German technology, and tested and tuned on the Nurburgring. Order the kit recommended for your vehicle.
Not Yet Reviewed
$1,652.99
—
$1,699.00
Manufacturer Rebate
MagnaFlow California Grade CARB Compliant direct-fit catalytic converters comply with California Air Resources Board (CARB) emissions regulations, which require more precious metals and rigorous testing, plus the direct-fit means an easier bolt-on install for you. Choose the perfect fit for your vehicle. Features include: * Stainless steel construction * CNC-precision robotic manufacturing * Limited 5-year/50,000 mile warranty
( 3 )
$1,522.00
—
$2,162.00
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$1,514.00
—
$1,607.00
aFe Mach Force XP exhaust systems are constructed of mandrel-bent stainless steel and come complete with free-flowing muffler(s), OE-style bayonet hangers, flanges, and band clamps, plus all hardware necessary for a hassle-free installation. Offered in single, dual, or quad muffler configurations, their smooth curves and large diameter tubes help reduce restriction and keep exhaust gas flowing smoothly for increased horsepower and torque. Available in cat-back, axle-back, and downpipe-back designs, almost all Mach Force XP exhausts are direct bolt-on systems that require no cutting or drilling and include all necessary hardware for a hassle-free installation. Most also include wrinkle-black powdercoated or polished 304 stainless steel tip(s) with a laser-cut stainless steel aFe power badge. Select models have carbon fiber tips with CNC-machined laser-etched inserts. aFe Mach Force XP exhaust systems are an ideal combination of performance, fit, and value. Additional features include: * Fit a variety of light trucks and cars, including European models * Available with 409 or 304 stainless tubing (varies by model) * "Stepped design" models increase exhaust velocity creating a broader torque curve throughout the rpm range * Straight-through, free-flowing stainless steel mufflers absorb high-pitch tones producing powerful sound * Leak-free 360-degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Several versions convert OE single exhaust to dual exhausts * Where applicable, incorporates an exhaust valve that uses the OE exhaust valve motor (not included) to regulate exhaust flow * Some systems use a unique resonance chamber to replace the OE muffler; produces a weight savings of up to 15 lbs. * Hi-Tuck design of specific models provide extra ground clearance when using an aftermarket suspension kit Note: Some aFe Mach Force XP systems are "Race Only" products solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 36 )
$1,505.70
—
$2,178.75
XClutch Motorsports clutch kits are performance upgrades that have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Select the kit for your application needs. XClutch 7.25 in. motorsport range is designed to provide a lightweight, high torque capacity solution for race vehicles such as used in time attack racing. The kits are available in single disc, twin disc, triple disc, and quad plate with a ceramic friction material, and are popular in high horsepower vehicles that use sequential gearboxes, and the lightweight design improves engine response. XClutch 7.25 in. race clutch range is ideal for drivers wanting a strong, high performance race clutch without having to compromise on quality. These kits are designed for high revving circuit or time attack applications and offer quick shift times and a lightweight construction. XClutch 8 in. range is designed to suit a wide range of vehicles commonly used in motorsport applications. As the clutch of choice for many club level racers and drifters around the world, these kits offer a great balance between torque holding capability, and heat capacity. These kits are available in both single and twin disc configurations. XClutch 9 in. range are one of their most adaptable kits for performance upgrades and conversions. They are available in organic, ceramic and carbon and offer exceptional torque capacity for high powered vehicles. The twin disc organic range is ideal for high horsepower street use, whilst the ceramic and carbon options are focused on track use where a higher heat capacity is often required.
Not Yet Reviewed
$1,599.66
—
$2,151.18
aFe BladeRunner GT Series intercoolers feature a bar and plate core design that outflows stock intercoolers by increasing heat dissipation over the much smaller tube and fin design used by the OEM. The unique BladeRunner end tanks are constructed out of 3/16 in. aluminum plates that incorporate seven Multi-Directional Vanes (MDV) throughout the intercooler. This aFe technology is used to direct hot air flow through the entire intercooler core, which allows for greater cooling. aFe BladeRunner GT Series intercoolers are100 percent TIG-welded by certified craftsmen for race-quality strength and durability. They are pressure tested at 200 psi.
( 5 )
$2,007.60
Maximize your ride's performance with a Mishimoto intercooler! These high performance intercoolers significantly lower air intake temperatures, while safely increasing horsepower for small and large turbo applications. Constructed from 6061 aluminum and precision TIG-welded, Mishimoto intercoolers feature sleek styling in a choice of colors for the ultimate in good looks. Whether you want to show it off or go with the popular sleeper look, Mishimoto makes an intercooler to give your engine--and your style--a boost!
( 2 )
$2,019.95
Brembo X-Style brake calipers are dedicated to car owners who are passionate and care deeply about all aspects of their vehicle—quality, reliability, performance, and style that is provided with color. Granting a touch of originality, customers can choose their favorite color to complement or contrast with their car. Brembo X-Style brake calipers are available in kit format with two fixed Brembo aluminum calipers and two complete sets of assembly accessories (springs and pins). Go ahead, "make them look twice"; customize your car with the color of Brembo X-Style brake calipers. Choose the calipers and color designed for your car.
Not Yet Reviewed
$1,542.98
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
