Availability
Showing In Stock Items. Show All 51 Items.
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 5 )
$553.40
—
$1,793.03
Timken clutch pilot bearings keep the transfer of power efficient! Leaders in friction management, Timken starts with high-quality steel and ends with precision-machined pilot bearings that will provide anti-friction alignment between your transmission and clutch. Timken puts you in motion and makes you good to go with their well-made, cost-effective pilot bearings.
( 32 )
$10.99
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 3 )
$618.51
—
$1,367.23
FAG USA pilot bearings offer high-quality for your project. They are produced worldwide for a wide range of applications to keep the input shaft centered and drivetrain vibrations down. Choose the one you need for your vehicle.
Not Yet Reviewed
$5.99
South Bend Clutch Stage 3 drag race clutch kits are powerfully built with heavily modified vehicles in mind—particularly those built for 1/4 and 1/8 mile tracks. They include a single mass SFI-approved flywheel with each kit, which is typically required for drag racing when the original design is dual mass. The pressure plate is race cover engineered to keep the clutch pedal travel short and quick. South Bend Clutch Stage 3 drag race clutch kits are recommended for drag racing, pulling, and drifting. Order the clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc reduces rotational mass and is assembled with all high-carbon components for maximum strength * Graphite-impregnated ceramic friction material perfectly suited for drag racing (maximum friction co-efficient, rapid heat dissipation, and abrupt engagement characteristics) * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$944.04
—
$3,841.26
South Bend Clutch Stage 3 Daily Driver clutch kits are recommended for single mass flywheel (SMF), when original design is dual mass flywheel (DMF). These clutch packages are designed for high-horsepower vehicles desiring a start performance similar to OE. The pressure plate is race engineered (SS) and SFI-approved with significant load increase over stage 1 and 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20 to 25 percent. Discs are assembled with heat-treated wear-resistant hubs, as well as drive plates and springs for high-load transfer and dependable operation. The sprung centers on the disc, in conjunction with the marcel fin between the linings, create a dual dampening effect that simulates OE start performance. A performance organic friction material with a high metal content increases torque and rpm capability—and maintains low operating temperatures, which reduce wear and glazing. South Bend Clutch Stage 3 Daily Driver clutch kits are the perfect match for your high performance street machine and occasional track use. Order the kit recommended for your application.
Not Yet Reviewed
$891.95
—
$3,841.26
Zoom MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Matched components are engineered to perform together correctly for maximum durability and performance. Select the model for your application needs. Features: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation
( 239 )
$205.99
—
$379.99
The downsizing of modern passenger car engines enables reduced fuel consumption and CO2 emissions, but can also increase rotational irregularities and natural vibrations. Torsional vibrations transmitted to other components in the drivetrain diminishes comfort and may even lead to component damage, therefore effective vibration damping is essential. LuK dual mass flywheels (DMF) reliably dampen torsional vibrations in the powertrain and ensure high gearshift and driving comfort in all speed ranges. Unlike a conventional flywheel, DMFs consists of two masses which are mounted to rotate against each other. A damping system in the form of arc springs is integrated to almost completely absorb the torsional vibrations of the engine. Precisely matched to the respective vehicle, each LuK DMF enables low-speed driving and ensures lower fuel consumption, as well as reduced emissions. Order the proper size for your vehicle.
( 12 )
$371.99
—
$710.99
ATP automatic transmission filter kits include everything you need for a fast, efficient filter change. They include all gaskets, filters, and other components that you might require. These replacement filters are specifically designed for your transmission; therefore, improper fitment is never an issue! Order the kit recommended for your application.
( 109 )
$26.79
—
$27.99
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 372 )
$227.99
—
$338.99
SPEC Stage 1 clutch kits are designed for street, drag race, drifting, road race, rally, pulling, and autocross use. They feature integrally molded carbon-Kevlar® based, high performance organic linings that offer smooth engagement and excellent life. These linings have an integrally bonded steel backing for strength under high clamp loads and temperatures. Hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand different kits are available for countless applications, from the 1940s and up. Additional features of SPEC Stage 1 clutch kits: * High-clamp pressure plate * Steel-backed and multi-compound woven organic material * High-torque sprung hub and disc assembly * Best for street and many track and off-road applications
( 18 )
$647.10
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 43 )
$108.99
—
$134.99
Rein OE quality flexplate bolts are manufactured to strict engineering standards and specifications in materials and tolerances to ensure proper tightening and retention of the flexplate. The bolts are designed to be direct replacement for original bolts identical to OEM for your specific vehicle to ensure proper fit and function. The bolts are sold individually or in sets. The bolt sets include all necessary bolts to help you complete a specific repair. Order the OE quality flexplate bolts in the application and quantity needed.
Not Yet Reviewed
$1.99
South Bend Clutch Stage 4 X-Series clutch kits are build-to-order clutch packages for vehicles modified to exceed Stage 3 hp parameters. The kits include a steel, single mass, SFI-approved flywheel for safety. The race-engineered pressure plate is modified for maximum plate load, and helps to deliver more transmittable torque, stability, extended life, and superior thermal resistance. The South Bend Clutch Stage 4 X-Series clutch kits provide noticeably better dynamics through higher clamp loads, when driving your vehicle to its limits. Order the Stage 4 X-Series clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc offered in sprung and un-sprung options * Graphite-impregnated ceramic or sintered iron friction material options * Torque ratings calculated at time of ordering * Engagement characteristics can be abrupt * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$1,562.55
—
$3,841.26
South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$618.51
—
$1,920.69
South Bend Clutch Stage 3 Endurance clutch kits are recommended for single mass flywheel (SMF) when original design is DMF (dual mass) to achieve optimal performance. These kits use the same race-engineered SFI-approved pressure plates as Stage 3 Daily Driver packages. The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar® friction material is used for its unique friction compounds applied with high-energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. These Stage 3 Endurance clutch kits are recommended for applications such as rally, endurance race, club sport, autocross, performance street and daily driving. Order the kit you need.
( 2 )
$944.04
—
$3,841.26
Designed for spirited and daily driving, the South Bend Clutch Stage 1 clutch kits make for a great OEM replacement when your factory clutch gives out. The pressure plate included in this clutch kit has an increased clamp load that promotes longer life, and the disc is dual dampened for smooth engagement and increased transmission life. The disc has also been designed with premium friction materials, which will ensure for rapid heat dissipation and will help to increase the life of the clutch. Select the Stage 1 HD clutch kit designed for OE replacement or your performance application.
( 17 )
$514.34
Centric Premium clutch master cylinders match or exceed original equipment parts in quality, configuration and fitment. The Centric Parts line of clutch slave cylinders is the most complete in the automotive aftermarket. Cylinders are complete and are manufactured under the highest quality standards by OEM and OES manufacturers.
( 1 )
$47.99
Beck/Arnley clutch master cylinders are high-quality, direct-fit OE replacement master cylinders. They will restore proper clutch operation while extending clutch life. These direct replacement parts meet or exceed OEM specifications.
( 8 )
$68.99
If your clutch seems to be giving you the slip, Sachs Stock Replacement clutch kits are an affordable option for repair or replacement to help you restore your vehicle back to its proper operation. Sachs Stock Replacement clutch kit components are built to OEM specifications to offer the same fit, form, and function as the factory OE part for a safer, more comfortable drive. Choose the replacement clutch kit designed to fit your application needs.
( 8 )
$239.99
—
$386.99
These Standard Motor automatic transmission control solenoids are designed to replace faulty factory units to keep your transmission shifting smoothly. They meet or exceed OEM specifications and are available for a variety of applications.
( 14 )
$201.99
Clutch master cylinders should be the first thing checked when you experience shifting problems with your vehicle's manual transmission. Centric Brakes offers a wide range of premium clutch master cylinder replacements, constructed to meet the highest standards outlined by OES and OEM manufacturers. They're a direct fit and (where applicable) come with complete reservoirs, floats, switches, and aluminum casting body design. Centric Brakes premium clutch master cylinders match the factory fitment, quality, and configuration—and will get you flying through gears as you're moving down the road. Order the model recommended for your application.
Not Yet Reviewed
$45.99
Did you know that most manual transmission vehicles have two master cylinders? One is for the brakes, and the other works with the clutch. Dorman clutch master cylinders can help cure hard shifts, mushy clutch pedals, and useless pedals lying down on the job. They deliver increased performance and durability. Their industry-leading application coverage is second to none. If you want your manual transmission performing at optimum levels, replace your original clutch master cylinder with an upgrade from Dorman!
( 27 )
$121.99
The SACHS dual-mass flywheel is the key to first-class passenger car and light commercial vehicle drivability. The driver and occupants are aware of reduced driveline and body noise and enjoy smoother travel with more pleasant gear shifts. SACHS offers dual-mass flywheels for many OE applications, so be sure to check for yours when replacing the clutch.
( 2 )
$412.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
