Availability
Showing In Stock Items. Show All 37 Items.
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 41 )
$38.99
—
$49.99
Designed for use with Edelbrock's single and dual feed fuel line kits, these high-quality stainless steel braided lines make it simple to complete your installation of any Edelbrock fuel pump to fuel filter. Russell anodized aluminum fittings are included.
( 43 )
$58.95
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 60 )
$13.99
—
$63.99
Maintain proper braking with Dorman power brake booster check valves. They are built to OEM specifications and install easily in seconds. The valves are designed to ensure proper vacuum in power boosters for positive braking.
( 28 )
$4.99
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$52.99
—
$66.99
Edelbrock Performer fuel line and fitting kits include the braided flex hose and pre-assembled ends to connect your fuel filter to the mechanical fuel pump—or, in racing applications, to the fuel pressure regulator. These kits are available in a variety of styles, providing leak-free installation in minutes. When plumbing a fuel system, trust the aftermarket performance expertise of Edelbrock!
( 112 )
$69.95
If you have a hole in your radiator hose, replace it with Dayco flexible radiator hoses. Designed to replace straight or molded radiator hoses, these precision-corrugated hoses feature knitted reinforcement and synthetic EPDM construction combined with an inserted helical steel coil spring. The Dayco design provides excellent flexibility without flattening or collapsing, as well as the ability to resist splitting, ballooning, environmental elements, coolants, and temperature changes. Dayco flex radiator hoses are available in a selection of sizes to keep your coolant flowing.
( 162 )
$13.99
—
$22.99
Continental OE technology series flexible radiator hoses can be shaped for specific applications and are constructed to original equipment manufacturers' specifications. Their tough EPDM rubber tube and cover resist heat, ozone, and chemical coolants, and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or exceed SAE J20R4, D1 specifications. Continental OE technology series flexible radiator hoses are available for all your custom needs.
( 54 )
$14.99
—
$29.99
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 437 )
$16.99
—
$38.99
Sunsong offers power steering hose assemblies for thousands of vehicles from the 1950s and up. The OE replacement hoses are available in a variety of materials and configurations, both in high-pressure and low-pressure options. If you've notice squealing or poor performance when you turn the wheel, you may have a worn hose leaking fluid. Maintain your system with the hose assembly recommended for your application.
( 56 )
$6.99
—
$45.99
These Standard Motor Products ported vacuum switches are designed to open and close the vacuum signal path with changes in coolant temperature. These switches can be used to control vacuum-activated components on your ride.
( 12 )
$26.99
—
$44.99
Edelmann power steering pressure hoses are constructed to last. The covers are highly resistant to oil, heat, and ozone, that can cause ordinary assemblies to fail prematurely. The inside tube can withstand internal oil temperatures of up to 300 degrees F. Plus, high-tensile strength braided fabric helps these hoses withstand pulsation pressures of up to 1,500 psi and bursting pressures that exceed 6,000 psi. Tubing is coated with a zinc-aluminum alloy with an aluminum-rich epoxy topcoat, and the couplings and fittings are zinc plated for rust and corrosion protection.
( 122 )
$30.99
—
$34.99
ACDelco offers a wide variety of hoses to get your vehicle back on the road. Whether you need to replace fuel, coolant, oil, or vacuum hoses, you can count on ACDelco Gold parts to deliver OE fit and performance. Order the replacement hoses recommended for your application.
( 1 )
$71.99
Dorman keeps your brake system connected with their wide selection of OEM replacement brake hoses. These rubber hoses deliver increased performance and reliability and are available for most specific vehicle applications. Dorman brake hoses are fully assembled, and those with banjo end fittings include new copper washers to ensure proper sealing. All hoses are tested up to 4,000 psi to ensure that safety standards are met. Don't wait for your hose to bulge or burst--order Dorman hydraulic brake hoses for consistent performance from your brake system.
( 288 )
$12.99
—
$18.99
Keep your distributor vacuum advance working properly with these Standard Motor distributor vacuum advance check valves. They meet or exceed OEM specificatons and are made for a variety of applications.
( 14 )
$6.99
ACDelco Gold molded radiator coolant hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. These OE-style hoses are specially designed, GM factory-molded replacements to fit today's smaller, tighter-fitting engine compartments. ACDelco Gold coolant hoses are temperature rated from -40 to 275 degrees F (-40 to 135 degrees C) and are approved for marine applications. Order the model recommended for your vehicle. (Note: Do not use these molded coolant hoses for fuel or oil transfer purposes.) Features include: * Protective sleeves (where applicable) help duplicate General Motors OE for proper fit and function * Designed to resist electrochemical degradation for durability * Available for vintage and heavy-duty applications
( 71 )
$14.99
When, it's time to move brake maintenance to the "do" list, Centric brake hoses will help keep you riding safely. The very last thing you want in your "wait till it breaks" project list is your brake lines. If your brakes are feeling even the slightest bit spongy or it's just time to replace them, find your make and model match with Centric brake hoses.
( 45 )
$19.99
—
$32.99
Keep the hot coolant circulating with molded heater hoses from Dayco. These hoses are constructed from synthetic EPDM for high-strength and resistance to oil, salt, mud, debris, coolants, and environmental elements. The inner base tube of Dayco molded heater hose is reinforced with knitted rayon for maximum strength and burst-resistance. They eliminate the need for multiple connections of hoses and clamps. Dayco hoses are specifically designed for your application to ensure proper fit and function.
( 105 )
$9.99
Continental molded bypass hoses feature a Versigard rubber tube and cover to resist heat, oil, and weather. Their Tylanar-knit reinforcement meets or exceeds SAE J20R3, D1 specifications.
( 43 )
$12.99
Keep your ride cool and running efficiently with Dayco molded radiator hoses. These OE-style replacements feature knitted reinforcement and all-synthetic EPDM rubber construction—which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 to 257 degrees F. The inner base tube of these hoses is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hoses. Dayco molded radiator hoses are available in more than a thousand configurations, with dozens of length and diameter options, to achieve fitment on most any vehicle.
( 170 )
$16.99
Sunsong offers replacement brake hoses for thousands of vehicles from the 1940s and up. Nearly all are assembled with various hose end attachment options. These rubber brake lines are available in countless lengths for dozens of positions on your vehicle. Order the configuration recommended for your application.
( 27 )
$8.99
—
$19.99
Raybestos Element3 hydraulic brake hoses meet federal standards to ensure performance and safety in your vehicles. These replacement lines provide exceptional durability and a longer life over competitors' hoses. Element3 hydraulic brake hoses utilize premium fittings to ensure a good seal and ease of installation. Over 1,400 models are available to service vehicles from the 1940s and up. Order the hoses recommended for your application.
( 28 )
$30.99
Fine Lines fuel lines are pre-bent and flared with the correct threaded fittings which reduces your install time tremendously. Their tank to engine fuel lines run from the back of the vehicle to the front, and will either connect to the fuel pump at the motor or run directly to a fuel rail. The mild steel lines are Galphan coated for added protection, while their stainless steel lines are T304, but are of a special softer blend to help with any possible leaks. Fine Lines carries a wide variety of compatible lines (main, return, vapor lines, etc.) for different years, makes, and models, including classic cars. Choose the lines designed for your vehicle.
( 14 )
$32.13
—
$78.69
Classic Tube offers precision pre-bent tubing for all of your automotive needs, including vapor lines. Made from 304 grade stainless steel or original steel, they are styled on state-of-the-art, computer-driven CNC tube benders to match the original lines. That means that these quality pieces will install easily and fit great. Vapor lines are perfectly end-formed and assembled with fittings. Replacing or restoring is made simpler with fuel vapor lines from Classic Tube--the people bent on perfection!
( 5 )
$171.99
—
$209.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
