Availability
Showing In Stock Items. Show All 21 Items.
Hybrid Racing K-Swap clutch release system upgrades help to eliminate grinds during hard shifts and improve the feel of gear changes. Factory clutch master cylinders in newer cars are known to be rather unreliable, and because of their poor design and quality, they can lead to premature failures of critical parts throughout the drivetrain. High rpm grinds are mostly attributed to the OE master cylinder's inability to transfer fluid effectively to the slave cylinder, thus causing grinding and rasping of the gears and synchro since the clutch disc hasn't fully disengaged. Upgrading the clutch master cylinder and clutch line to Hybrid Racing K-Swap clutch release systems changes the system to an older, more direct, and efficient system. This improvement allows the driver to feel a more consistent and direct clutch pedal which also improves shifting at high rpms. These kits are intended to replace all of the clutch release components which will give you the most direct and reliable clutch pedal feel. Features and kit contents: * Genuine Honda® parts--not reproductions * OEM Nissin EM1 clutch master cylinder * Stainless steel braided clutch line * Banjo fittings with washers * OEM NISSIN slave cylinder (non-dampened)
Not Yet Reviewed
$266.94
Exedy OE clutch kits provide the correct fit and function to restore stock power levels. Most replacement clutch kits include pressure plate assembly, clutch disc, release bearing, pilot bearing or bushing, alignment tool, lubricating grease and general installation notes. Robotic testing, special heat-treating, and the use of their own friction materials ensure optimum pedal feel, better drivability, durability, and smooth engagement, so you can enjoy your ride more. Exedy OE clutch kits offer coverage for a wide range of vehicles. Choose the kit designed for your vehicle.
( 10 )
$186.30
—
$198.25
Hybrid Racing clutch master cylinder upgrades create a more direct, efficient system, resulting in increased pedal feedback and consistency at higher engine speeds and load, which may also improve shifting at high rpms. Kits vary slightly according to the vehicle, but each kit delivers an OEM-quality master cylinder (CMC), along with stainless steel braided clutch line and hardware. Some kits also include slave cylinder, banjo fittings with washers, seals, and grease. Select the kit designed for use on your Honda® or Acura®.
Not Yet Reviewed
$266.94
Hybrid Racing offers clutch master cylinders for a variety of applications, including select Honda© and Acura© cars from 1992 and up. These OEM-quality replacements are popular upgrades because of their fit and performance. Built from aluminum, some models feature a remote reservoir, while others include an attached reservoir. Select the design recommended for your vehicle.
Not Yet Reviewed
$184.29
ACT heavy-duty pressure plates feature induction-hardened diaphragms to reduce wear and promote smooth operation. They utilize stronger drive straps and rivets to strengthen the pressure plate and prevent breakage. All castings are CNC-machined for greater consistency and precision. Step up your race and street game; order the ACT heavy-duty pressure plates recommended for your vehicle. Some of their many features include: * Most popular choice * 20 to 50 percent clamp load increase * Computer spin-balanced * Stiffening ribs * Pedal feel is stock to moderate * SFI-certified * Recommended disc: Street/Race
( 10 )
$283.00
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 48 )
$118.99
Action Clutch heavy-duty OE spec replacement flywheels are direct replacements with no additional add-ons. Direct plug-and-play components, these original fitting flywheels are manufactured from high-quality OE materials and offer a direct fit for your old, beat up one. If you are doing a clutch replacement, select an Action Clutch OE replacement flywheel, instead of spending money to resurface your old used flywheel. Select the one needed for your car.
Not Yet Reviewed
$178.46
ACT Performance clutch discs provide quicker engagement with quiet operation. These performance discs are built with premium organic material with increased friction and high copper content for better heat transfer—and steel-backed linings for a greater burst of strength and durability. For faster shift action, ACT clutch discs are modified with reduced marcel, and the heavy-duty center hub springs help keep action smooth. ACT Performance clutch discs afford you quality and value that will outlast and outperform the competition. Order the model designed for your vehicle application.
( 2 )
$141.00
—
$143.99
LuK solid flywheels are dynamically balanced to eliminate vibration and increase clutch performance. Manufactured to OE specifications, pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing, offering a smooth, flat surface crucial for proper clutch operation. They are engineered and built with quality materials for a longer service life. Select the disc diameter and ring gear tooth quantity needed for your application.
( 122 )
$100.99
—
$161.99
Competition Clutch offers stock clutch kits for a variety of applications, including select Mazda, Subaru, Toyota, Lexus, Pontiac, Mitsubishi, Infiniti, Nissan, Honda©, and Acura© models from 1985 and up. These OE-style clutch replacements are the economical solution for cars that are stock or have basic bolt-ons. They provide a stock torque capacity rating and maintain stock pedal feel. Break-In Procedure: After you install your new Competition Clutch, you'll want to make sure that the clutch is properly broken in for ultimate operation. To break in your clutch, shift as often as possible during the first 500 miles, by doing so you'll ensure that the material from the disc is embedded into the friction surfaces of the pressure plate and flywheel. Following the break-in procedure will deliver the longest possible clutch lifespan.
Not Yet Reviewed
$195.00
—
$199.99
ACT race clutch discs are available in three distinct styles--choose the options that best suit your application. Spring-centered discs are the most popular and feature reduced driveline shock and spline wear with quieter operation. Rigid-hub versions offer improved durability but increase gear noise and spline wear. For either of those hub designs, you can choose six pads for better heat management and engagement, or four pads for the quickest shifting. Sintered iron discs offer the highest torque capacity and ultra-high heat capacity. They're designed for cars using clutch-less shifting or drag racing transmissions. Additional product details: * Premium ceramic friction materials provide high-heat tolerance, high coefficient of friction, and low wear rates * Carefully broached splines provide exact fit onto the transmission input shaft for long spline life and better clutch release * Heavy-duty torsional dampening springs are provided in the best sizes and spring rates to help reduce noise * Drive plates are made of high-carbon steel; heat-treated and black zinc coated to resist bending, cracking, fatigue, and rusting * Certified to SFI specifications
( 23 )
$141.00
—
$197.00
SKF Bearings wheel bearing and hub assemblies are premium parts produced using high-quality steel and surface finishes, premium seals, factory-grade sensors, precision manufacturing techniques, and strict assembly tolerances. They're 100 percent tested to the actual OE specifications for fit, form and function. SKF bearing assemblies are easy to install, pre-adjusted, and lubricated for life. Plus, SKF offers the broadest range of hub bearings and kits in the aftermarket. SKF wheel bearing and hub assemblies provide everything you need in one box to complete your install. Depending on the model selected, your kit may include bearing and flange, axle nut, circlip, O-ring, seal, or other parts. Order the assembly designed for fitment on your vehicle application.
( 67 )
$115.99
ATP automatic transmission control solenoids are designed to replace faulty factory units and keep your transmission shifting smoothly. They're available in a variety of configurations for dozens of transmission types—on thousands of vehicle applications. These replacement solenoids meet or exceed OEM specifications.
( 1 )
$146.99
FAG USA wheel bearing and hub assemblies are compact, lightweight, maintenance-free hubs. They combine the cost-effectiveness and proven performance characteristics of other bearings with the convenience of an integral mounting flange for mounting brake, disc, and wheel. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearing and hub assemblies, available for hundreds of applications.
( 11 )
$130.99
Beck/Arnley wheel bearing and hub assemblies are key to restoring your vehicle's smooth and safe ride. They're made to meet or exceed OEM specifications and are available for a variety of domestic and import vehicles. ABS sensors are included where necessary. Order the replacement model designed for your car or truck application.
( 10 )
$125.99
Zoom MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Matched components are engineered to perform together correctly for maximum durability and performance. Select the model for your application needs. Features: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation
( 239 )
$143.99
—
$201.99
These Standard Motor automatic transmission control solenoids are designed to replace faulty factory units to keep your transmission shifting smoothly. They meet or exceed OEM specifications and are available for a variety of applications.
( 14 )
$127.99
—
$135.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
