ACURA INTEGRA Transmission & Drivetrain - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

ACT Heavy-Duty Clutch Kits

ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.

4.54 out of 5 stars ( 87 )

$484.00

—

$1,242.00

Hybrid Racing A2 K-Series Swap Bolt-In Short Shifters

Hybrid Racing offers A2 K-Series Swap bolt-in short shifters for a variety of applications, including many Honda© and Acura© models from 1988 and up. In 2008 Hybrid engineers set out to solve one of the largest headaches that K-Series swaps presented—What do you do about the OEM RSX plastic shifter? After a few months of designing and prototyping, they created the very first Bolt-In K-Series swap shifter. The Hybrid Racing Bolt-In K-Swap shifters allow you to retain the stock center console in your EF, EG, EK, and DC chassis and only require drilling two small holes. They work with both stock DC5 shifter cables and the Hybrid Racing race cables. From California to England to Japan, racers all around the world choose Hybrid shifters not only for their reliability but for ease of installation and adjustability. The front/back throw can be adjusted to three different settings (100 percent stock throw, 75 percent stock throw, and 50 percent stock throw). The left/right throw can also be adjusted to three different settings (again, 100 percent stock throw, 75 percent stock throw, and 50 percent stock throw). The shift knob can be adjusted to up to 3 in. vertically, and the aluminum offset block can be rotated 360 degrees. They accept M10 x 1.5 shift knobs.

Not Yet Reviewed

$436.99

Hybrid Racing Short Shifter Assemblies

Hybrid Racing offers short shifter assemblies for a variety of applications, including many Honda© and Acura© models from 1988 and up. These economical units feature an unparalleled level of adjustability so drivers can tweak every aspect of the shifter to suit their own preference. The shifters' frame is constructed from TIG-welded, powdercoated, 1000 Series steel. The anodized upper and lower rocker assemblies are now made of single pieces of aerospace-grade aluminum, with custom sealed ball bearings to reduce friction. The new V2 shifter, for instance, is 60 percent smoother than the original version, requiring much less physical effort to row through gears all while being significantly lighter. Shift throw adjustment is achieved using two threaded cable attachment pins, meaning fine tweaks can be made to shift throw, allowing you to dial in the exact throw that suits your shifting style. Each attachment pin features a wear-resistant Delrin© pivot cap for sturdy, quiet operation. New dual, zinc-plated extension springs replace the OEM-style torsion centering spring for better-centering action and a more direct feel. The front/back throw and left/right throw can be adjusted independently; and most models include shift knob height adjustment. Simple single-bolt height adjustment design (borrowed from the popular K-swap shifters) allows the knob to be adjusted higher or lower than stock (within a 1.5 in. total range) with only a 5mm Allen wrench. Now you can tweak the shifter's throw AND knob position independently until the shifter functions exactly the way you want it to. Enjoy smooth, precise, and direct shifts with a new short shifter assembly from Hybrid Racing!

Not Yet Reviewed

$351.49

—

$436.99

ACT Streetlite Xact Flywheels

ACT Streetlite Xact flywheels are designed to provide significantly improved engine response and acceleration at an affordable price. Order the model designed for your vehicle application. Features: * Lighter and stronger than OE flywheels * Better drivability and durability * Recommended for street use and drag racing * Designed using the latest CAD and Finite Element Analysis software * CNC-machined and dynamically computer-balanced for smooth operation at extremely high rpm * Entire forgings are heat-treated for strength and toughness * Tight tolerances for fit, concentricity, and parallelism * Adequate material behind the friction surface for excellent heat capacity * One-piece construction for reduced failure and uniform, efficient heat transfer—no more warped inserts * Integral ring gears are induction-hardened for longer gear life and weight reduction where it matters most—eliminates gear breakage or separation * Ring gears are cut with lead-in chamfers for better starter engagement and to prevent rounding-off gear teeth * SFI-certified

4.94 out of 5 stars ( 36 )

$255.00

—

$679.00

Action Clutch Chromoly Lightweight Flywheels

Action Clutch flywheels are designed and tested to ensure the best quality and performance. They are SFI certified, which meets the top performance standards in the automotive and motorsports industries. Engineered for street and race applications, Action Clutch chromoly flywheels offer three major benefits: Low weight, low inertia, and high thermal capacity. Made from durable one-piece billet chromoly steel or chromoly steel forgings, they are specifically made for light- to high-tuned racing cars that see drag racing, drifting, autocross, street use, and rally events, and specifically designed for a reduction in weight and inertia for better engine response. Each flywheel has gone through—and passed--engineering tests up to 15,000 to18,000 rpms, and are heat treated for extreme durability, saving you money by resurfacing multiple times.

1.0 out of 5 stars ( 1 )

$267.71

—

$361.25

Hybrid Racing Performance Shifter Cables

Hybrid Racing offers shifter cables for a variety of applications, including many Honda© and Acura© models. They're a performance upgrade replacement for OEM cables. The solid rod ends and spherical bearings give these cables a firmer, tighter feel over stock cables, resulting in fewer missed shifts and a more connected feel to the chassis. Hybrid cables deliver peace of mind and improved driving performance—even when shifting hard or during demanding racing scenarios. Other notable features of the Hybrid Racing cables are spherical bearings, stainless steel push rods, and upgraded stainless steel swivel support tubes (OEM are plastic and known to break on the factory cables). All of the rod ends and mounting bushings are CNC-machined 6061 aluminum that have been heat-treated and hard-anodized black before being laser-etched with the Hybrid Racing logo and flair. Aside from two shifter cables, each set includes cotter pins, and other components relevant to your application. Select the kit designed for your vehicle.

Not Yet Reviewed

$398.99

Hybrid Racing Z3 K-Series Swap Bolt-In Short Shifters

Hybrid Racing offers Z3 K-Series swap bolt-in short shifters for a variety of applications, including many Honda© and Acura© models from 1988 and up. In 2008 Hybrid engineers set out to solve one of the largest headaches that K-Series swaps presented—What do you do about the OEM RSX plastic shifter? After a few months of designing and prototyping, Hybrid created the very first bolt-in K-Series swap shifter. Nearly 10 years and thousands of shifters later, Hybrid Racing presents the latest evolution of its innovative design. The bolt-in K-Swap shifter allows you to retain the stock center console in your EF, EG, EK, and DC chassis and only requires two small holes to be drilled. It works with OEM Honda 06-11 shifter cables and the Hybrid Racing race cables. From California to England to Japan, racers all around the world choose K-Swap shifters not only for their reliability but for ease of install and adjustability. The front/back throw can be adjusted to two different settings (75 percent stock throw, and 40 percent stock throw). The left/right throw can also be adjusted to two different settings (again, 75 percent stock throw, and 40 percent stock throw). Shift knobs can be adjusted to up to two inches vertically, and the aluminum offset block can be rotated 360 degrees. In the box: * (1) Bolt-in shifter * (2) Small cotter pins * (1) Cable stay bracket * (1) Hardware pack * 7 flat washers, 3 small, 4 large * 7 Allen head bolts, 3 small, 4 large

Not Yet Reviewed

$436.99

On Sale

B&M Precision Sport Shifters

These B&M Precision Sport shifters incorporate the latest technology from B&M in shifter development. They are CAD-designed using 3D printer prototypes to allow for different designs and materials, depending on your vehicle application. The shifters feature a fully isolated stick with a spherical pivot bearing that provides for extremely smooth operation and a 30 percent throw reduction. These shifters provide that quick, smooth, precise shifting you need, time and time again.

4.6 out of 5 stars ( 96 )

$142.95

XClutch Stage 2 Clutch Kits

XClutch Stage 2 clutch kits offer performance upgrades for both street and track applications. Designed in-house, XClutch utilizes the latest ceramic technology in their Stage 2 kits offering either a cushioned or a sprung-style friction disc. They are mated with a high performance pressure plate and are recommended for vehicles requiring a higher level of torque holding and heat capacity. Features: * 1C cushioned ceramic—the discs offer a dampening layer between the two friction surfaces which is clamped together as the force of the pressure plate is exerted on the disc. This dampening along with a sprung hub offers drivability despite the ceramic friction surface. These kits are ideal for track cars that require some drivability or very high-horsepower street vehicles that require the added heat capacity of the ceramic friction material. * 1B sprung ceramic—these friction discs offer a sprung center to allow for drivability and are specifically designed for track use with minor street use. The kits offer great heat capacity due to the ceramic friction material and are available for a wide range of performance vehicles.

Not Yet Reviewed

$469.20

—

$1,864.75

Exedy Clutch Master Cylinders

Clutch master cylinders are vital components of manual transmission systems, controlling hydraulic pressure to engage and disengage the clutch. Exedy clutch master cylinders are quality OE replacements to restore optimal shifting and prevent clutch slippage or even a loss of power. Exedy offers many choices covering an array of vehicles. Choose the clutch master cylinder designed for your vehicle.

5.0 out of 5 stars ( 4 )

$20.33

ATP Automatic Transmission Inline Filter Kits

ATP automatic transmission inline filter kits will keep your transmission fluid clean. Foreign particles can cause premature transmission wear. These quality inline filters will do the job and are easy to install. Kits include hoses, clamps, and instructions. Sift out the bad and keep your transmission happy with inline filters from ATP.

4.25 out of 5 stars ( 12 )

$23.99

—

$26.99

Exedy OE Clutch Kits

Exedy OE clutch kits provide the correct fit and function to restore stock power levels. Most replacement clutch kits include pressure plate assembly, clutch disc, release bearing, pilot bearing or bushing, alignment tool, lubricating grease and general installation notes. Robotic testing, special heat-treating, and the use of their own friction materials ensure optimum pedal feel, better drivability, durability, and smooth engagement, so you can enjoy your ride more. Exedy OE clutch kits offer coverage for a wide range of vehicles. Choose the kit designed for your vehicle.

4.62 out of 5 stars ( 13 )

$169.28

Action Clutch Aluminum Lightweight Flywheels

Action Clutch flywheels are designed and tested to ensure the best quality and performance. They are SFI certified, which meets the top performance standards in the automotive and motorsports industries. Engineered for street and light racing, Action Clutch aluminum flywheels are precision machined from the highest quality billet aluminum forgings to strict tolerances for optimum performance and reliability. They deliver optimum tensile strength, heat dissipation, and weight reduction, yet not too light to prevent poor idle and driving issues. They are designed to improve throttle response, quicker shifting, and reduce clutch wear, depending on your drivability. All Action Clutch aluminum flywheels are balanced and thoroughly inspected for quality and fitment. Select the one needed for your vehicle.

Not Yet Reviewed

$267.71

—

$382.46

Competition Clutch Stage 2 Clutch Kits

Competition Clutch offers Stage 2 clutch kits for a variety of applications, including many Mazda, Subaru, Toyota, Scion, Geo, Lexus, Pontiac, Mitsubishi, Hyundai, Nissan, Infiniti, Ford, Honda©, and Acura© models from 1975 and up. The kits provide up to 80 percent increase in torque capacity and are properly suited for aggressive street use and moderate track use. The Brass Plus material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. State 2 clutch kits include a Competition Clutch performance pressure plate, a high-torque sprung disc with anti-burst steel-backed Brass Plus facings, throw-out bearing (where applicable), pilot bearing/bushing (where applicable), and alignment tool.

Not Yet Reviewed

$395.00

Exedy Clutch Slave Cylinders

Exedy clutch slave cylinders provide an OE fit and function to replace bad, malfunctioning cylinders with confidence. They are made from quality materials and built to OE specifications, offering the proper performance matching that of the originals they are replacing. Choose the clutch slave cylinder designed for your vehicle.

5.0 out of 5 stars ( 2 )

$11.00

South Bend Clutch Stage 2 Daily Driver Clutch Kits

South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.

3.17 out of 5 stars ( 6 )

$292.98

—

$475.27

ACT Prolite Xact Flywheels

ACT Prolite Xact flywheels provide a quicker throttle response and improved acceleration. They're CAD-designed, CNC-machined, and computer-balanced for quality and precision. The manufacturing process includes chromoly forgings with induction-hardened integral ring gears for maximum life. Prolite Xact flywheels are stronger and more durable than billet steel, aluminum, or cast iron! Dozens of models are available—order the one designed for your vehicle. More product features include: * Smooth operation at all RPMs * Optimal mass distribution * Lead-in chamfers * Heat-treated and tempered

4.71 out of 5 stars ( 42 )

$291.00

Competition Clutch Stock Clutch Kits

Competition Clutch offers stock clutch kits for a variety of applications, including select Mazda, Subaru, Toyota, Lexus, Pontiac, Mitsubishi, Infiniti, Nissan, Honda©, and Acura© models from 1985 and up. These OE-style clutch replacements are the economical solution for cars that are stock or have basic bolt-ons. They provide a stock torque capacity rating and maintain stock pedal feel. Break-In Procedure: After you install your new Competition Clutch, you'll want to make sure that the clutch is properly broken in for ultimate operation. To break in your clutch, shift as often as possible during the first 500 miles, by doing so you'll ensure that the material from the disc is embedded into the friction surfaces of the pressure plate and flywheel. Following the break-in procedure will deliver the longest possible clutch lifespan.

Not Yet Reviewed

$195.00

ACT Race Clutch Discs

ACT race clutch discs are available in three distinct styles--choose the options that best suit your application. Spring-centered discs are the most popular and feature reduced driveline shock and spline wear with quieter operation. Rigid-hub versions offer improved durability but increase gear noise and spline wear. For either of those hub designs, you can choose six pads for better heat management and engagement, or four pads for the quickest shifting. Sintered iron discs offer the highest torque capacity and ultra-high heat capacity. They're designed for cars using clutch-less shifting or drag racing transmissions. Additional product details: * Premium ceramic friction materials provide high-heat tolerance, high coefficient of friction, and low wear rates * Carefully broached splines provide exact fit onto the transmission input shaft for long spline life and better clutch release * Heavy-duty torsional dampening springs are provided in the best sizes and spring rates to help reduce noise * Drive plates are made of high-carbon steel; heat-treated and black zinc coated to resist bending, cracking, fatigue, and rusting * Certified to SFI specifications

4.57 out of 5 stars ( 23 )

$147.99

—

$229.00

Hybrid Racing Clutch Master Cylinders

Hybrid Racing offers clutch master cylinders for a variety of applications, including select Honda© and Acura© cars from 1992 and up. These OEM-quality replacements are popular upgrades because of their fit and performance. Built from aluminum, some models feature a remote reservoir, while others include an attached reservoir. Select the design recommended for your vehicle.

Not Yet Reviewed

$161.49

Dorman CV Joint Boots

Dorman CV joint boots protect your CV joints from destructive dirt and moisture. A common cause of CV joint failure is cracks in the CV boot. When the boot is cracked, it allows dirt and grit to mix in with the grease and wear down the parts of the joint. CV boots should be replaced as soon as cracking is visible in their rubber folds. Pick up one of these Dorman CV joint boots to eliminate the problem.

1.6 out of 5 stars ( 5 )

$17.99

—

$23.99

Action Clutch Stage 3 Clutch Kits

Action Clutch single disc clutch kits contain a range of street to high performance clutch systems built using American materials which are all locally sourced as it has been done for 60 years. Action Clutch staged kits come complete with the clutch disc, pressure plate, throwout/release bearing, pilot bearing/bushing (when applicable), and alignment tool. Action Clutch Stage 3 clutch kits for heavy-duty street and occasional drag/road/drift racing offer a 170 percent increased holding capacity. They utilize extremely durable, high performance MIBA sprung ceramic discs and feature a single diaphragm heavy-duty pressure plate with reinforced drive straps for increased durability. They are available in a 4- and 6-puck configuration with the 4-puck being the more aggressive of the two. Stage 3 kits are engineered for low/mild horsepower vehicles, and create quick engagement as well as clutch chatter, which should be minimal once proper break-in is completed. Select the kit designed for your vehicle. Pressure plate and clutch disc features: * All clutch covers feature ductile iron friction plate * Reinforced heavy-duty drive straps * 4-stage, heat-treated diaphragm spring * 100 percent dynamically spin balanced * American grade rivets * Full enclosed spring retainers * Sprung hub for easy engagement

4.0 out of 5 stars ( 1 )

$403.71

Dorman Wheel Hub Dust Caps

Dorman wheel hub dust caps are available in a variety of styles and finishes to add a touch of style and added protection to your brake rotors. The caps are offered in nearly a dozen sizes for secure fitment on specific applications. Help prevent dirt and moisture from disturbing your brake components. Order and install the number of dust seals needed.

4.28 out of 5 stars ( 46 )

$5.99

Competition Clutch Stage 1.5 Clutch Kits

Competition Clutch offers Stage 1.5 clutch kits for a variety of applications, including many Toyota, Pontiac, Mitsubishi, Dodge, Nissan, Infiniti, Honda©, and Acura© models from 1990 and up. The kits are an economical solution for moderately modified cars or simply aggressive individuals with stock power. They offer 30-40 percent of torque capacity and maintain stock pedal feel. DO NOT use with added forced induction such as turbo, supercharger, or NOS systems. State 1.5 clutch kits include a Competition Clutch pressure plate, full face organic performance disc assembly, throw-out bearing (where applicable), pilot bearing/bushing (where applicable), and alignment tool.

Not Yet Reviewed

$350.00