Availability
Showing In Stock Items. Show All 51 Items.
NGK Resistor spark plug wire sets utilize a construction method known as "variable pitch" wire winding to create resistance to radio frequency interference. They have a lower resistance than conventional carbon core wires, which translates into longer wire life. At the center of each wire is a fiberglass stranded core, made from the same family of materials as those used in bulletproof vests. This core greatly enhances the overall strength of the wire and prevents the pulling strains that wires are often subjected to. The spark plug wires feature custom-designed terminal boots that provide an exact fit—and high-quality EPDM and silicone coverings to resist high temperatures, oil, and chemical damage. Each wire is fitted with a positive-locking, corrosion-resistant, nickel plated terminal end for a tight fit and maximum resistance to vibration and separation. The wires are numbered to correspond to cylinder numbers, and the coil wires are color-coded for a correct and easy installation. Order the Resistor set designed for your vehicle application.
( 106 )
$56.99
Clearance
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 93 )
$55.99
—
$73.99
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 805 )
$83.65
$54.37
On Sale
One of the easiest ways to maximize horsepower from your Honda® or Acura® engine is to get rid of the weak stock coil mounted inside the cap. These MSD brass terminal distributor caps are specially constructed to allow the use of an external coil such as the high voltage of an MSD Blaster Coil. They also include an 8.5mm Super Conductor coil wire, crimp tool, and rotor.
( 6 )
$89.99
$80.95
Summit Racing brings you our ultimate ignition wire with our 8.5mm 50ohm wire sets. They are made with 100% high tear resistant silicone construction, a 50ohm per foot Wire-Wound FERRITE magnetic suppression core, stainless steel and brass terminals and extreme heat-resistant boots. Only the highest quality raw materials and Made in the USA workmanship, go into every set. The 100% High-Tear resistant silicone jacket protects the inner ferrite core from heat breakdown. The dual silicone layers are bonded together using a tightly woven fiberglass matting that virtually eliminates terminal pull off. Our 50-ohm ferrite core has over 3 FEET of nickel/copper mag winding per INCH! With this tightly wound core, you can be assured that your spark plugs are getting all the power your ignition system can provide. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used on all applications; for superior connection and consistent voltage delivery. High heat silicone and high dielectric strength polymers make up the extreme composition of the spark plug boots. Our boots provide superior radiant heat resistance for longevity and high dielectric strength properties to prevent voltage leakage. With all of these features built into our Race-proven 8.5mm 50-ohm sets, you can be assured that installing one of these sets on your engine will give you all the performance and durability you have come to expect from Summit Racing products.
( 196 )
$76.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$63.99
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 79 )
$53.99
—
$59.99
Moroso Blue Max Spiral Core custom-fit wire sets have a special strategically-wound 304 stainless steel conductor and Kevlar core that reduces the ohms of resistance per foot, while delivering more spark energy, better EMI suppression, and a higher dielectric strength. A tough synthetic silicone jacket resists high temperatures and oils, and the extra-thick EPDM layer adds greater electrical insulation. Compact silicone plug boots provide extra header clearance and feature fold-over crimped terminals for a secure connection.
( 49 )
$97.99
—
$102.99
Clearance
Denso crankshaft positioning sensors detect crankshaft rotation during the engine-combustion cycle. Denso produces both magnetic resistant element (MRE) type and magnetic pick-up (MPU) type sensors. Features and benefits of Denso crankshaft positioning sensors include: * Denso MRE sensors have a pair of MREs on an integrated circuit (IC) chip; this unique design is extremely accurate, even just after an engine is started * The molded IC chip is installed inside a cylindrical magnet so it is positioned closer to the gears that rotate with the crankshaft--a design almost 10 times more sensitive than Hall element type sensors * Denso uses a polyphenylene sulfide resin coating over the molded IC chip and cylindrical magnet for greater strength and superior resistance to substances like fuel, engine oil, and emission byproducts
Not Yet Reviewed
$94.99
Clearance
Holstein Parts ABS sensor line has superior coverage for domestic and import applications. Anti-lock Braking, ABS Systems allows the driver to maintain control of the car in an emergency braking situation. The ABS system relies on sensors to monitor the wheel's speed and communicate with the ABS computer to ensure ideal performance. The data from the ABS sensor then allows the computer to balance the speed of each wheel to prevent the brakes from locking up and avoiding dangerous skidding situations. Holstein Parts focuses on using only the highest quality materials for their products, all parts are manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part.
( 3 )
$53.99
—
$89.99
Keep your spark alive with these Beck/Arnley ignition control modules. These vehicle-specific units are direct OE replacements for your factory modules. They use the most tough, durable, reliable materials when it comes to manufacturing their products. Don't wait until your car's ignition won't turn over--replace those worn-out parts today with Beck/Arnley.
Not Yet Reviewed
$79.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Beck/Arnley vehicle speed sensors. Depending upon your vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air-control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points.
( 1 )
$57.99
—
$74.99
If your car won't start, Beck/Arnley quality-built ignition starter switches will get you on your way. They provide the fit that you want and the function that you need to replace malfunctioning components. These reliable ignition switches are available for several applications. Get off to a good start--replace your old switches with Beck/Arnley ignition starter switches.
Not Yet Reviewed
$56.99
Don't take chances with an old or questionable ignition control module that can leave you stranded. Standard Motor Products replacement ignition control modules are designed to exceed OEM specifications for accurate, maintenance-free operation. Trust your vehicle's ignition needs to Standard Motor Performance.
( 39 )
$90.99
Your vehicle has countless electrical switches—powering everything from turn signals and ignition … to HVAC and interior accessories. A faulty switch can cause immediate headaches. Beck/Arnley offers a variety of replacement switches to cover many functions and vehicle applications. They're tested for performance and proper fitment. Order the model recommended for your electrical needs.
( 5 )
$51.99
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 20 )
$66.99
Hella crankshaft position sensors will accurately measure speed and position of your crankshaft and provide the data to engine control. These are quality-built, direct replacements for your malfunctioning sensors. The amount of electronic components in vehicles is constantly growing, and Hella is ready to help you service them to keep your vehicle properly maintained for the road ahead. Sensors are available for applications from 1992 and up.
Not Yet Reviewed
$91.99
The crankshaft position sensor is an electronic device that monitors the position and/or rotational speed of the crankshaft, then communicates with the vehicle's ECU to control ignition timing and fuel injection parameters. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts crankshaft position Sensor line has superior coverage for domestic and import applications.
( 1 )
$53.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$70.99
Clearance
Standard Motor combination switches keep several functions at your fingertips. Having one switch to activate different accessories--headlight control, turn signals, and windshield wipers--has proven effective and efficient for drivers. SMP combination switches replace faulty ones and restore operation, with a robust design created from high-grade materials that meet stringent demands. Stay focused on the road, knowing that the levers on your column will operate the wipers, washers, blinkers, and headlight beams appropriately, with Standard Motor combination switches.
( 16 )
$94.99
The Delphi crankshaft position sensors offer several benefits including enhanced durability, accurate readings, and improved emissions control. They are designed to withstand temperature fluctuations and are tested to meet or exceed original equipment (OE) requirements. These sensors contribute to optimal engine performance, reliability, and drivability by providing precise position and speed data to the engine control unit. Select the Delphi crankshaft position sensor designed for your application needs.
Not Yet Reviewed
$51.99
Delphi vehicle speed sensors offer an accurate, clean signal input to your vehicle's ECM. Their designed digital output gives the maximum signal to noise ratio and they will maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection due to their single-element design. Delphi vehicle speed sensors provide quality materials, extended life, improved reliability, and superior drivability.
Not Yet Reviewed
$82.99
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$55.99
The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.
( 2 )
$78.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
