Availability
Showing In Stock Items. Show All 469 Items.
The RevMax custom coated transmission pump plates are a must-have part on any 68RFE rebuild. The factory plate is typically found to have excessive grooving in it and should always be replaced during an overhaul. These custom laser-cut steel alloy plates are heat-treated to insure flatness and hardness and are then finished with RevMax's proprietary friction reducing and self-lubricating electrostatically applied coating. This special coating reduces pump wear from the pump gears by decreasing surface friction and increasing lubrication during dry startups. These plates will work with all factory pumps regardless of manufacture date and with aftermarket pumps.
( 2 )
$99.00
RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.
( 2 )
$1,850.00
—
$2,300.00
Yank Performance offers Eliminator Series custom torque converters for a variety of transmission applications, including Powerglide, THM350, and THM400 models. These fluid couplings allow the engine to spin independently of the transmission in automatic vehicles, enabling the engine to keep running when the car is stopped, and facilitating smooth power transfer. The replacement street/strip converters are available in a variety of stall speed ratings, input spline quantities, diameters, and other options.
Not Yet Reviewed
$1,098.99
For customized vehicles, Advance Adapters pilot bushings help adapt engines to transmissions. Most of them feature a special bronze Oilite material with pores that allow the oil to permeate throughout the bushing—keeping everything properly lubricated. Some of the many styles include: * Solid bronze bushings * Crankshaft bushing spacers * Bushing extenders
( 10 )
$9.50
—
$30.80
For customized vehicles, Advance Adapters pilot bearings help adapt engines to transmissions. Their all steel roller bearing design offers the lowest friction option.
( 5 )
$21.27
—
$28.39
Rekluse Clutch Core Manual TorqDrive clutch kits allow more friction disks to fit the clutch, delivering smoother lever function, less clutch fade, and a more linear power delivery. In addition, the billet center hub and pressure plate work together to move more oil through the clutch, reducing drag and decreasing operating temperatures. The TorqDrive technology features thin friction disks and protective basket sleeves, while the Core technology optimizes oil flow, helping your clutch last longer, and reduces temperatures to maintain consistent performance even in extreme conditions. Join the clutch revolution with the Rekluse Clutch Core Manual TorqDrive clutch kit best suited for your application. Other product features and benefits include: * Reduced (10 percent) clutch lever pull strength for less hand fatigue * Expanded friction zone for increased control and smoother take-offs * Increase (20 percent) in torque capacity for reduced wear, reduced heat, and increased power transfer capability * Billet internal components provide enhanced durability and increased oil flow
Not Yet Reviewed
$909.00
These TransGo automatic transmission shift valves will provide maximum throttle between the 3-4 gear shift. During highway speeds, the TransGo automatic transmission shift valves will keep the transmission in 4th gear, so there are no downshifts while at cruising speeds.
( 5 )
$63.00
FTI Performance SST Series custom-order torque converters are available for use with a variety of transmissions, including Powerglide, THM350, and THM400. The 9 in. units are used by top drag racers. A torque converter is what transmits torque from the engine to a rotating driven load. It's a type of fluid coupling which allows the engine to spin somewhat independently of the transmission. SST Series torque converters are available with a 0-blade stator for a turbo spline, or the looser 6T stator model.
Not Yet Reviewed
$1,149.00
Summit Racing's Pro LS transmission adapters enable you to swap to more common and inexpensive manual transmissions from other vehicles. In addition to the bellhousing adapter, they often include handy items like the billet steel flywheel, fasteners, pilot adapter, and starter mounts. These adapters allow the use of the high performance clutches commonly used with the transmission. The kits are available for 5-speed or 6-speed applications.
( 1 )
$920.99
—
$1,227.99
These TCI PRO-X torque converters are designed specifically for Top Sportsman, Top Dragster, and Outlaw Street Car classes. Able to handle 2,500+ hp applications (including multi-stage, nitrous-assisted, supercharged, and twin turbocharged engines), these high-strength torque converters feature a TCI exclusive--HDT (Heat Dissipating Technology) Coating--further enhancing their ability to deliver unsurpassed consistency and durability. Features include: * Hand-built steel stator * Forged mounting cover * 3 sets of heavy-duty internal bearings * Furnace-brazed turbine and pump assembly * Built for GM, Ford, and Chrysler transmissions * 4 or 6-bolt flanges and optional billet front available
Not Yet Reviewed
$1,815.95
ATI puts the same technology into these Super Streetmaster torque converters as they do into all of their championship-winning parts. ATI furnace-brazes the pumps and turbines and installs new billet stator caps, springs, and rollers in the sprags. New hubs, pilots, and mounting rings have been installed and CNC-machined for perfect accuracy. Every available option has been taken to ensure that these converters will handle anything that you throw at them.
Not Yet Reviewed
$598.99
Hughes Performance Street and Strip transmissions are made tough enough to deliver tire-spinning shifts race after race. They include internal and external racing components, which increase strength, reliability, and torque capacity. Plus, they feature Hughes' manual/automatic valve body to provide precise manual or fully automatic shifting. Choose the transmission type best suited for your vehicle.
( 30 )
$1,964.99
—
$2,339.99
TCI Competition torque converters are proven race winners and an excellent choice for stock and Super Stock cars. They work well with both big and small blocks, producing power between 4,500 and 7,000 rpm. You'll maintain engine rpm between shifts with their efficient design, and gain improved reliability with an oversize caged bearing supporting a new stator. ETs are more consistent and reaction times faster as a result of a stronger housing, which resists flexing and ballooning.
( 9 )
$985.95
—
$1,645.95
On Sale
Designed for stock and mildly hopped-up street vehicles, our Summit Racing™ torque converters give you the extra stall speed that you need for quicker launches. They're available for a variety of transmission makes and models. Summit Racing™ converters are computer-balanced and feature: * Submerged arc welds * New turbine hub * Custom stator * New pilot * New impeller hub
( 364 )
$564.99
$291.99
—
$509.99
On Sale
Summit Racing™ Pro LS torque converters are designed for stock and modified LS-powered street vehicles that make up to 600 rwhp. They will furnish the extra stall speed that you need for quicker launches—and they pair well with our Summit™ Pro LS series camshafts. These computer-balanced torque converters feature: woven carbon lockup clutch lining; heavy-duty Torrington bearings; hand TIG welding; a new pilot, impeller hub, and turbine hub; and a custom stator. The torque converters are available in a variety of options; order the model recommended for your application.
( 35 )
$564.99
$509.99
—
$809.99
FTI Performance SRL Series billet lockup torque converters feature a computer-designed, CNC-machined billet front cover and a billet lockup piston--making premature clutch wear a thing of the past. With custom stator designs and multiple blade angle pumps, stalls are available from 2,800-4,400 rpm. They are custom-built to your exact needs and driving style. With furnace-brazed and heli-welded fins, severe-duty sprague, and anti-ballooning flanged impeller hub, these torque converters are virtually indestructible.
( 16 )
$1,059.00
—
$1,895.00
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$3,995.95
—
$4,559.95
On Sale
Replacing older OE converters can be a challenge, often compelling customers to settle for makeshift solutions. You can remedy such an issue by choosing a LuK Clutch TorCon torque converter to restore smooth shifting to your automatic transmission. LuK's selection of converters provide the correct fit and function, covering a wide range of vehicles, assuring you will be able to find the proper unit for your vehicle.
( 2 )
$349.99
—
$1,245.99
$314.99
—
$1,121.39
Redesigned and strengthened, Reid Racing Super Hydra 400 transmission cases address weaknesses and add features that improve every aspect of the Turbo 400. They build their Super Hydra 400 cases with full 360 degree internal case "lugs" that retain the center support and pressure plate. Not only are they lightweight and offer minimal drag, but their abuse tolerance has been kicked up several notches to handle high-horsepower levels without ending up with a ruined transmission! A direct replacement for the GM case, Reid cases use an incredibly expensive permanent mold casting technique to increase the case wall thickness, making it sufficient to pass SFI 4.1 certifications without the need for any external shields or internal liners. Super Hydra 400s are massively tough, ductile, and leak-free—with the strength to handle rock crawling, as well as desert or short-course truck racing. Their modular, 2-piece design allows them to be used with all popular engines by simply changing bolt-on Superglide bellhousings. Reid Racing Super Hydra 400 transmission cases are offered in drag/street and off-road versions, each with features geared specifically for those applications. Features: * Speedometer and governor provisions * Improved billet steel pressure plate * Oversized snap ring * Longer band anchor pins captured by oversize bosses * Additional dipstick hole on driver side * Multiple external pressure taps allow for monitoring of circuit pressures * Accept all style oil pumps, including 8-bolt and vari-pitch designs * Heli-coiled bellhousing and oil pump threads * Pre-machined to fit larger custom planetary gear carriers Off-road also includes: * Pre-machined side oil feed feature for 4L80-E center support * Front band anchor tapped for custom ARP anchor bolt (supplied) * Pre-machined bosses for input and output speed sensors * Un-machined speedometer boss for maximized 4x4 transfer case load support * Oil line ports machined for -AN fittings * Pre-machined with additional stud/nut clearance for Advance Adapters transfer case adapters * Available with a 4L80-E size pressure plate
( 4 )
$2,148.99
—
$2,282.99
Got a hankering for heavy-duty performance? Chevrolet Performance T-56 Super Magnum 6-speed transmissions offer the most in combined strength, versatility, and control. Plus, they are able to withstand an unbelievable torque capacity--700 lb.-ft.--while providing crisp shifts! These beefed-up versions of the TR6060 will certainly fill your craving for high performance with larger components. Chevrolet Performance T-56 Super Magnum 6-speed transmissions combine greater strength with precision engineering to feed the passions of cruisers and track racers alike. Highlights of the T-56 Super Magnums: * Designed for custom, retrofit installations of Chevrolet Performance LS crate engines * Exterior case similar to fourth-generation F-body with stronger, high-capacity gear sets, input shaft and output shaft used in the TR6060 * 26-spline input shaft * 31-spline output shaft * Slip-yoke design * Gear ratios: first through sixth--2.66, 1.78, 1.30, 1.00, .80, .63 * 40-tooth reluctor ring for use with electronic vehicle speed sensors in Chevrolet Performance controllers * Accommodates three shifter positions * Includes: 2-position shifter plate, shifter handle, ball-type shifter knob with Chevrolet Performance logo
( 1 )
$5,691.84
Summit Racing™ TH400 transmission cases are a street/strip version of the TH400 aftermarket SFI transmission case. The bellhousing is not included and must be purchased separately. A direct replacement for the GM case, Summit Racing™ cases use a permanent mold casting to increase the case wall thickness, making it sufficient to pass SFI 4.1 certifications without the need for any external shields or internal liners. The 2-piece design allows them to be used with all popular engines by simply changing bolt-on bellhousings. Features include: * Speedometer and governor provisions * Longer band anchor pins captured by oversize bosses * Multiple external pressure taps allow for monitoring of circuit pressures * Accepts all style oil pumps, including 8-bolt and vari-pitch designs * Heli-coiled bellhousing and oil pump threads * Pre-machined to fit larger custom planetary gear carriers
( 2 )
$1,899.99
McLeod Non-SFI aluminum bellhousings are the gold standard when it comes to accuracy and compact performance. These Non- SFI rated version is for those customers looking for a light weight bellhousing, but not concerned with a SFI rating so these units do not come with a steel block plate.
( 7 )
$185.00
—
$295.00
These Chevrolet Performance automatic transmission controllers include the wiring harness, controller, software, and laptop hookup. They are designed to allow for the use of electronically controlled transmissions in early model vehicles. Chevrolet Performance automatic transmission controllers are fully programmable for upshift, downshift, part throttle and wide-open shifts, and shift firmness. They come preprogrammed--just enter your rear tire diameter and rear axle ratio and go, or create your own custom shift characteristics. Chevrolet Performance automatic transmission controllers were originally developed by GM Racing for off-road truck racing. They have the ability to record and graph drag racing data like time, speed, shift point, engine rpm, and more.
( 1 )
$1,812.27
—
$2,100.48
Bowler Performance All-in-One transmission wiring harnesses for the Tremec T-56 Magnum transmission comes equipped with all the connections pre-wired into one harness for a simple installation and ease of use. The small epoxy sealed controller is mounted to the VSS output using the existing bolt, and once the unit is powered up, you will be able to connect via Bluetooth to your Apple or Android smartphone using Bowler's free app. The app will give you the ability to customize the input and output settings for each feature to ensure proper operation in your vehicle. The perfect finishing touch for any Tremec T-56 Magnum conversion, Bowler's All-in-One harnesses eliminate the need for any additional equipment to operate the reverse lock out or generate the correct speedometer signals coming from your Tremec T-56 Magnum. Previously, you would have needed up to five separate parts to perform all the same functions wrapped one of these harnesses. The more technology we incorporate into our hot rods sometimes requires specific input signals to allow everything to function correctly. With the two speed outputs available in these harnesses, you can independently control the output of each one further eliminating any need for additional equipment and connections. Regarding the reverse lockout, Bowler has incorporated the same speed setting feature as the OEs into the All-in-One harnesses, giving you better control over when the lock out is triggered. Bowler's All-in-One harnesses give you much greater flexibility in the components you are able to use and require less time wiring everything up, providing an easier solution for setting up your Tremec T-56 Magnum transmission. Choose the harness version designed for your specific transmission make. Additional notes: * Harnesses utilize a small, built in, epoxy sealed box that will control each of the three functions with power and grounding for each function through a switched +12 V circuit and a wire connected to the negative battery post or engine block. * Control of the reverse lockout solenoid is based on a user defined speed setting (default is set at locked above 4 mph and unlocked at 0 to 3 mph), eliminating the need for a separate lock-out control box. * For your electronic speedometer, the harness is equipped with two speed sensor outputs; the speed sensor outputs generate a square wave signal that goes from about -5 to roughly +5 V, varying in frequency as the speed changes. * Output will automatically shift and give you 0 to +10 volts for EMC input needing positive only signal. * The two speed sensor outputs are completely independent and can be calibrated separately with any pulse count and ratio you want, and are able to drive any common speedometer, cruise control, or ECM. * Tremec T-56 Magnum reverse lock-out module VSS with dual output, pre-set as GM 40-pulse output on one and 16-pulse output on the other and can be adjusted with your iOS or Android device. * Includes wiring for reverse lights, reverse lock-out, and vehicle speed sensor.
( 4 )
$324.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
