Availability
Showing In Stock Items. Show All 122 Items.
Summit Bucks
ACDelco Gold automatic transmission fluid filters can help to ensure the reliability and performance of your automatic transmission. These filters trap impurities that may be present in the fluid before they get pumped through to the moving components of your transmission, thus avoiding damage. On-time maintenance can extend your transmission's life and keep it operating efficiently. Perform service with ACDelco Gold automatic transmission fluid filters.
( 49 )
$21.99
—
$45.99
Summit Bucks
Sonnax case saver retainers are designed for 1999 and later GM 4L80-E units—and are the only intermediate clutch retaining ring case saver that allows the intermediate band to be retained. The case savers fit over the intermediate band anchor lug inside the case and extends rearward to support the intermediate clutch backing plate retaining ring, preventing case lug blow-out. Over the years there have been a variety of case saver designs, however, all required eliminating the intermediate band, as is often done in drag racing trans-brake applications. Only Sonnax case saver retainers support the intermediate clutch retaining ring yet are thin enough to allow the intermediate band to be installed to provide case lug protection in all applications.
( 5 )
$35.60
—
$35.99
Summit Bucks
Sonnax knows you want your transmission to shift like a dream. Their automatic transmission bands are extra-wide intermediate bands suitable for heavy-duty, commercial, and 4x4 vehicles. These drop-in replacements provide 15 percent more holding capacity and feature a 60 percent thicker case anchor, decreasing the chance of band failure under severe conditions. (Note: The red-lined version of these Alto bands is designed for high-torque street racing applications. The Kevlar®-lined version is too aggressive for street use and best suited for high performance racing applications.)
( 8 )
$44.43
—
$49.46
Summit Bucks
ACDelco GM Genuine Parts automatic transmission filters help keep abrasive particles from damaging transmission components. They provide optimal fluid flow to and from your transmission to eliminate sticking while you're trying to shift. These OE replacements are designed, engineered, and tested to rigorous standards—backed by General Motors. Order the model recommended for your vehicle.
( 9 )
$21.99
Summit Bucks
ACDelco automatic transmission shift solenoid valves are GM-recommended replacement components. Keeping your transmission shifting and operating efficiently is crucial to the overall life of vehicle. These original equipment solenoids will provide the same performance, durability, and service life you can expect from a General Motors direct part.
( 5 )
$25.99
Summit Bucks
GM 6L80 and 6L90 transmissions often suffer failure of the 4-5-6 clutch assembly due to flexing and bowing of the backing plate (coning)—especially when your clutch-apply pressures exceed OE specifications. Sonnax clutch backing plates are designed to minimize flexing/bowing when the clutch is applied, drastically reducing the likelihood of clutch plate distortion. Their stiffer backing plate design outperforms OE and aftermarket plates.
( 8 )
$50.44
Summit Bucks
ACDelco GM Genuine Parts flywheel and flexplate spacers are designed, engineered, and tested to rigorous standards and backed by General Motors. These true OE replacements will help to reposition the flywheel, allowing for appropriate clutch pedal height and assembly location. They provide proper engagement and disengagement of the clutch during vehicle operation, aiding in optimal shifting. The spacers offer factory fit and performance in specific GM vehicles.
( 2 )
$49.99
Summit Bucks
The Sonnax adjustable rear servo pin kit 34912-01K replaces GM TH400 and '95-earlier 4L80-E servo pins. OE pins have seven different lengths to allow for adjustment of the Low/Reverse band—but are no longer available from GM. The Sonnax pin kit has an adjustment range that covers the five longest OE pins to allow for accurate setting of the Low/Reverse servo piston travel. The pin features an O-ring groove to prevent leakage of line pressure past the case pin bore. Kit contents: * Servo Pin * Screw * (4) Small washers * (1) Large washer * (2) O-Rings
( 1 )
$31.29
Summit Bucks
Extend the life of your forward clutch and input sprag with the upgrade performance of Sonnax heavy-duty 2-3 shift valves! Your factory valve is limited to applying the overrun clutch only in D3, 3rd gear; whereas these Sonnax valves apply it in D3, 1st, 2nd, and 3rd. This furnishes extra durability to clutch components in plow trucks, heavy-duty vehicles, and in high performance apps. The Sonnax 2-3 shift valves also work well with units operated by aftermarket electronic paddle shifters--allowing for full downshift engine breaking in 2nd gear, while the shifter remains in the D3 position. No special tools are required for installation; it's a transmission overrun clutch component worth exploring!
( 4 )
$41.99
Summit Bucks
When standard OE pins just won't do, use Sonnax extra-long Servo pin and seal kits to get the job done right! The Sonnax 4L60/4L60-E servo pin is longer than the longest OE pin. The pins extra length simplifies adjustment, eliminating the need for having to add length to the pin, itself. The Servo pins are made from chromoly steel, so they're durable for high performance applications as well as stock replacement. Dual PTFE seals have been added to improve sealing in the case bore and as well as an O-ring to improve sealing between pin and the 2nd gear Servo. The kits include pin, PTFE seals and an O-ring seal.
( 5 )
$38.16
Summit Bucks
ACDelco GM Genuine Parts transmission pan gaskets renew leak-free performance. Sealing the interface between the oil pan and the transmission housing, these gaskets utilize premium materials—like cork, elastomer, or silicone/steel—to provide the appropriate fit and function. For your GM vehicle, choose ACDelco GM Genuine Parts transmission pan gaskets to restore the best performance, durability, and service life.
( 16 )
$26.99
—
$29.99
Summit Bucks
The factory-original fit and lasting function of ACDelco GM Genuine Parts automatic transmission dipstick tubes are the ingredients for the perfect repair without breaking your budget. They are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Features: * Built with premium materials for prolonged service * Precisely engineered to OE specifications * Trouble-free installation and function ensured by rigorous testing procedures * Designed for direct compatibility
( 5 )
$47.99
—
$48.99
Summit Bucks
Sonnax band adjustment screw kits will prevent band slippage and transmission case breakage. Your OE screws are subject to deflect or bend over time, causing unwanted issues. These screws are made from high-strength, hardened, and tempered alloy steel to prevent problems. They feature stock thread length and are zinc plated to prevent corrosion. Sonnax has a solution to your "weak link"—their strong band adjustment screw kits.
( 1 )
$33.31
Summit Bucks
Sonnax TCC regulator and isolator valve kits assist in recovering hydraulic control and renew TCC performance. Severe wear of the TCC (torque convertor clutch) regulator valve bore, caused by oscillation of the OE valve, allows the regulated converter to apply pressure to your exhaust. This is a primary cause for TCC-related slip code and overheated converters. Exhaust pressure also diminishes line pressure, which can result in burnt clutches. Excess wear at the isolator valve bore reduces TCC apply pressure. Reconditioning the bore and installing a Sonnax TCC regulator and isolator valve kit will restore normal TCC operation by reestablishing the hydraulic integrity of this circuit. Order the kit recommended for your transmission application. Features include: * Sleeve manufactured from highly wear-resistant aluminum * Hard-coat anodized aluminum regulator valve combats premature wear * Isolator valve lengthened to operate in unworn portions of the bore * Annular grooves help center valves in bore to reduce future side-load wear
( 4 )
$26.33
—
$38.44
Summit Bucks
Sonnax manual shift shafts help rebuilders use late model cores to rebuild into early model units. Sonnax manual shift shafts contain early model manual shift shafts that retrofit to a late model manual shaft detent lever, allowing the late model case and detent lever to be used in early models. These shafts offer a more economical solution than the OE manual shift shaft and detent lever kit, without the added cost for such additional components as the OE lever, pin, and shaft seal--parts rarely used during the rebuild. The manual shift shaft and fasteners have been yellow zinc plated for corrosion resistance to road salt and other environmental contaminates. The flange face of the nuts is serrated for better holding capacity.
( 5 )
$23.24
—
$31.80
Summit Bucks
Many Sonnax clutch hubs are designed for the extra-duty requirements of drag racing with Powerglide and other GM transmissions, for instance. Machined from a high-quality medium carbon steel forging, most hubs will accept five friction discs for the added load capacity needed in high horsepower race cars. All splines and thrust surfaces are precision-machined to exacting tolerances, and the unique lube hole pattern is designed to reduce drag on the friction discs in low gear. Sonnax clutch hubs are also available with or without lightening holes to reduce rotational weight.
( 16 )
$32.24
—
$47.50
Summit Bucks
ACDelco transmission solenoids help restore overall performance with the proper fit, form, and function for your vehicle. They feature high-quality materials and strict design requirements that match OE specifications—critical to ensuring an easy installation and dependable drivetrain operation. Choose the replacement transmission solenoids designed for your application so you and your vehicle can go the distance!
( 5 )
$37.99
—
$45.99
Summit Bucks
Sonnax hydraulic line pressure booster kits contain stronger pressure regulator springs and large ratio boost valves designed to work together, providing progressive pressure increases as driving conditions become more demanding. Their springs are approximately 10 percent stronger than OEM and more conservative in impact than other aftermarket kit springs. Large ratio boost valves provide higher pressure incrementally and when it's needed the most. The combination of these springs and valves in the Sonnax hydraulic line pressure booster kits gives you the best of both worlds--a modest pressure increase at the low-end, with a high-end pressure that's equal to or greater than that of other aftermarket kit springs.
( 20 )
$31.34
—
$43.23
Summit Bucks
GM 6L45, 6L50, 6L80 and 6L90 automatic transmission units may exhibit multiple line pressure and cooler/converter/lube flow problems due to excess wear in the pressure regulator bore. Deterioration at the balance spool end allows critical fluid loss, resulting in high line pressure, harsh shifts, and overheating due to reduced cooler/converter flow. Wear at the outboard spool robs converter feed pressure and lowers line pressure, resulting in soft shifts and burnt clutches. Installing a Sonnax pressure regulator valve kit restores the hydraulic integrity of these circuits for proper line pressure control in all ranges. A new pressure regulator valve outer spring is also included to replace weakened original springs and provide a modest 5 psi increase across the pressure curve. Additional details: * Hardcoat anodized aluminum valve combats premature wear * Lengthened critical spools operate in non-worn portion of bore for added stability and wear prevention * Annular grooves help center valve in bore to reduce future side-load wear * Drop-in Zip Valve parts install quickly and easily Kit contents: * Valve * Spring * Drill bit .040 in. * 2 checkballs (1 extra)
( 2 )
$24.99
Summit Bucks
Get in the right gear with Sonnax shift levers. These replacement levers and kits are designed to work with most competition-type shifters—without modifications to the case. Sonnax offers a choice of one-piece and bolt-together levers; many include O-rings on the shafts to prevent leakage, and all are zinc plated for corrosion protection. Upgrade your stock shifter levers with replacements from Sonnax.
( 14 )
$38.22
Summit Bucks
Sonnax thrust bearings are replacements for your worn automatic transmission bearings to aid in smooth operation and noise reduction. The bearings act as a guide to help limit any axial movement which can hinder performance. Manufactured to exceed OE specifications for superior quality even under extreme conditions, order the Sonnax thrust bearings best suited for your application.
( 4 )
$26.42
—
$29.86
Summit Bucks
ACDelco transmission fluid dipsticks are factory-recommended replacement parts for your vehicle's original component. They're manufactured to GM OE-specifications for fit, form, and function for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. These OE dipsticks will provide the same performance, durability, and service life you expect from General Motors. They're available in nearly two dozen configurations; order the model recommended for your application.
( 6 )
$22.99
—
$49.99
Summit Bucks
ACDelco GM Genuine Parts clutch release bearings disengage the clutch by pressing on the pressure plate diaphragm spring or release lever. These bearings are attached to a clutch release fork that is hydraulically or mechanically operated by the diver's clutch pedal. They are manufactured to provide the same performance, durability, and service life you expect from General Motors.
Not Yet Reviewed
$53.99
Summit Bucks
Bore wear at the compensator feed regulator valve allows critical pressure loss that prevents proper clutch timing and control, resulting in harsh shifts, bind-up, and possibly, burnt clutches. You can recover hydraulic control and renew shift performance by installing a Sonnax compensator feed regulator valve kit. These kits featuring a Sonnax drop-in Zip Valve provide you with valve, spring, sleeve, and retaining clip to restore normal compensator action. Features and benefits: * Hardcoat anodized aluminum valve combats premature wear * Highly wear-resistant aluminum sleeve provides additional valve support * Includes calibrated spring for restoring OE compensator pressure * Drop-in Zip Valve parts install quickly and easily
Not Yet Reviewed
$38.44
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
