Availability
Showing In Stock Items. Show All 32 Items.
RevMax billet high performance towing/HD valve bodies for a variety of applications, including many Dodge and Ram trucks from the early 2000s and up. The V2.0 is 1 in. thick, but this new version has precision cutouts that allow the use of a stock filter and pan. Unlike other designs, full depth worm tracks in crucial circuits are included. Other competing designs have only a .190 in. deep worm track in several critical circuits. One restricted circuit is the combined vent track, responsible for all venting operations and in particular the problematic SSV valve. The next restricted circuit is the torque converter clutch signal circuit. Restrictions in this circuit create all kinds of torque converter related concerns, including dragging when coming to a stop, overheating, soft or harsh TCC apply or release, and back feed issues resulting in P1776 and P0871 trouble codes. Both the original and V2.0 have nearly full depth worm tracks in these areas which eliminate problem issues! The V2.0 plate will work with ANY aftermarket transmission pan, as well as with stock transmission pans. There is no need to alter any part of the pan or use special filters. Just install it like you would a stock channel plate and go. Order the model recommended for your year/make and transmission application. The RevMax 68RFE V2.0 ZeroFlex billet valve body features the following: * 6061 billet aluminum construction * Deep critical worm tracks * .0003 flatness across the entire plate. The only truly flat billet channel plate! * Micro-polished worm track surface. There are no visible or perceptible machining marks or stepovers. This ensures no chance of any leaking due to machining marks * Large radius machining on the filter cutout increases rigidity yet allows the use of a stock filter assembly * Angle milled step downs increase rigidity in problematic flexing areas * Ability to run up to 325 psi of line pressure without any warpage! (transmission tuning, TCM upgrade or pressure box is needed) * No pump modifications required for up to 250 psi * Proprietary worm track layout * Shortened shift times for crisp, clean shifts * Upgraded valve body to case seals * Billet steel SSV solenoid switch valve and end plugs * Revmax triple double 3/2 billet accumulator pistons with dual seals * Upgraded grade 8 custom fasteners * Upgraded steel accumulator housing plate that is 3x thicker than stock * RevMax proprietary accumulator springs for improved 3-4 shift feel * RevMax proprietary separator plate with the bonded gasket that eliminates cross leaks and warpage issues * Revmax proprietary upgrades * Mounting surface verified and flat filed * Threads checked and repaired if needed * Computerized testing on state-of-the-art $125k valve body test machines
( 3 )
$1,399.00
TCI trans-brake kits allow you to achieve maximum torque converter stall for quicker and more consistent reaction and 60 ft. times. They work like this: When the trans-brake is engaged, the vehicle can roll neither forward nor backward, and as you press on the accelerator, the engine can rev as high as the torque converter stall. Once the brake is released, power is immediately transferred to the rear tires, with less parts breakage than with a manual transmission.
( 21 )
$1,127.95
The transmission valve body, or simply valve body, is a crucial component for the proper function of your automatic transmission. Consisting of valves, solenoids, and hydraulic passages, the valve body controls the flow of fluid, directing it where it needs to go for smooth, positive gear changes. GearStar automatic transmission valve bodies efficiently direct fluid to the necessary components, keeping your gear changes precise. They are highlighted by strong billet aluminum construction and available with or without trans-brake. Select the one needed for your transmission.
Not Yet Reviewed
$1,250.00
BD Diesel automatic transmission valve bodies give your stock transmission increased holding capacity to handle higher horsepower engines. They have a newly designed anodized aluminum manual valve, new springs for improved shift qualities, and increased port sizes for better cooling.
Not Yet Reviewed
$1,204.95
Hughes Performance Pro Series Two Stage torque converter dump valve kits are two-stage complete kits for adding a dump valve to your Powerglide transmission. They offer increased stall speed while staging against the transbrake, faster engine/converter response, and reduced loading against the engine thrust bearing. They can also be applied down-track to help manage engine load and power application to the rear wheels. Hughes Performance Pro Series Powerglide torque converter dump valve kits are also available as upgrades on their Powerglide transmissions.
( 1 )
$1,045.99
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 31 )
$1,596.99
—
$1,683.95
TCI Circlematic automatic transmissions are great for oval track use. However, despite the sound of their name, they also can be used for performance marine applications. All transmissions feature high performance clutches, a steel clutch hub, and a modified planetary gear set that will work with the latest rear suspensions. Many specialty combinations are available.
Not Yet Reviewed
$1,699.95
RevMax's billet modified high-pressure pumps have been upgraded and modified to be able to produce over 325 psi with proper tuning. However, you would need a RevMax 68RFE valve body to be able to achieve more than 175 psi because of factory restrictions. All 68RFE pumps have been reworked with new valving and springs, and have passed multiple vacuum and pressure tests to ensure proper operation and reliability for many years. Select the RevMax modified high-pressure billet pump designed for your transmission. Note: Even though RevMax's pump can achieve extremely high pressure, it does not mean that they recommend more than 225 psi in the 68RFE transmissions.
Not Yet Reviewed
$1,599.00
RevMax 700 input clutch drums eliminate worrying about burning up your transmission. Billet aluminum models are available pre-built or unassembled. Billet steel models do not include clutches or steels. RevMax drums are packed with state-of-the-art features: * Anodized for the utmost in wear resistance and the highest durability * 29 percent additional clutch surface area vs stock * Fully balanced and blueprinted assemblies to ensure worry-free operation * Thicker sidewalls give the drum more rigidity in space and ensure that it will not flex under high pressure * Custom cooling circuit design gets hot fluid out quickly and brings in cooled fluid to help clutches and steels resist warping * RevMax exclusive seal design, ensures zero leakage and full clutch apply * Tested to 700 hp, these drums are great for moderately modified trucks and can also be used in stock applications * Must be used with a RevMax valve body assembly in order to benefit fully from its installation
Not Yet Reviewed
$1,099.00
Pacific Performance Engineering Stage 5 transmission rebuild kits are designed to handle the high stresses of sled pulling and drag racing, yet also work extremely well for towing and daily driver tasks. These Stage5 kits are some of the strongest upgrades that PPE offers. Thanks to the valve body recalibration kit (recalibration kit does not change shift points, only increases clutch holding power), converter flow valve, and upgraded C1, C2, C3, and C4 clutches and Kolene steels, the Stage5 kits will hold over 1,200 hp at the crank (1,000+ RWHP) and 1,800+ lbs.-ft. of torque. Models are available with or without triple clutch torque converter. Order the kit recommended for your application. Features include: * Valve body recalibration kit, converter flow valve, pump shim, and gaskets * C1 includes: 16 one-sided internal spline friction plates, 1 bottom apply plate, 1 top pressure plate * C2 includes: 7 friction plates, 7 steel separator plates, 1 bottom apply plate for increased rigidity * C3 includes: 6 friction plates, 7 steel plates, 1 bottom apply plate for increased rigidity * C4 includes: 6 friction plates, 5 steel separator plates, 1 modified apply piston, 1 top pressure plate
Not Yet Reviewed
$1,308.21
South Bend Clutch Stage 3 Endurance clutch kits are recommended for single mass flywheel (SMF) when original design is DMF (dual mass) to achieve optimal performance. These kits use the same race-engineered SFI-approved pressure plates as Stage 3 Daily Driver packages. The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar® friction material is used for its unique friction compounds applied with high-energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. These Stage 3 Endurance clutch kits are recommended for applications such as rally, endurance race, club sport, autocross, performance street and daily driving. Order the kit you need.
( 2 )
$1,237.02
South Bend Clutch Stage 3 drag race clutch kits are powerfully built with heavily modified vehicles in mind—particularly those built for 1/4 and 1/8 mile tracks. They include a single mass SFI-approved flywheel with each kit, which is typically required for drag racing when the original design is dual mass. The pressure plate is race cover engineered to keep the clutch pedal travel short and quick. South Bend Clutch Stage 3 drag race clutch kits are recommended for drag racing, pulling, and drifting. Order the clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc reduces rotational mass and is assembled with all high-carbon components for maximum strength * Graphite-impregnated ceramic friction material perfectly suited for drag racing (maximum friction co-efficient, rapid heat dissipation, and abrupt engagement characteristics) * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$1,237.02
South Bend Clutch Stage 3 Daily Driver clutch kits are recommended for single mass flywheel (SMF), when original design is dual mass flywheel (DMF). These clutch packages are designed for high-horsepower vehicles desiring a start performance similar to OE. The pressure plate is race engineered (SS) and SFI-approved with significant load increase over stage 1 and 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20 to 25 percent. Discs are assembled with heat-treated wear-resistant hubs, as well as drive plates and springs for high-load transfer and dependable operation. The sprung centers on the disc, in conjunction with the marcel fin between the linings, create a dual dampening effect that simulates OE start performance. A performance organic friction material with a high metal content increases torque and rpm capability—and maintains low operating temperatures, which reduce wear and glazing. South Bend Clutch Stage 3 Daily Driver clutch kits are the perfect match for your high performance street machine and occasional track use. Order the kit recommended for your application.
Not Yet Reviewed
$1,171.91
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 6 )
$1,392.65
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 3 )
$1,508.70
South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$1,624.75
South Bend Clutch Stage 4 X-Series clutch kits are build-to-order clutch packages for vehicles modified to exceed Stage 3 hp parameters. The kits include a steel, single mass, SFI-approved flywheel for safety. The race-engineered pressure plate is modified for maximum plate load, and helps to deliver more transmittable torque, stability, extended life, and superior thermal resistance. The South Bend Clutch Stage 4 X-Series clutch kits provide noticeably better dynamics through higher clamp loads, when driving your vehicle to its limits. Order the Stage 4 X-Series clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc offered in sprung and un-sprung options * Graphite-impregnated ceramic or sintered iron friction material options * Torque ratings calculated at time of ordering * Engagement characteristics can be abrupt * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$1,333.38
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
