Availability
Showing In Stock Items. Show All 42 Items.
Skip the clunky old mechanical linkage and install American Powertrain Hydramax hydraulic clutch release systems. They easily install in almost any rear-drive vehicle. The patent-pending adjustable master cylinder bracket allows you to mimic any original clutch rod angle, giving you a smooth, modern clutch feel without hacking up your firewall. The systems are designed to work with original and aftermarket pedals and are available for most vintage 4-speeds, along with TREMEC T5, TKO, Richmond, T56, and Magnum 6-speed transmissions. These systems come with the nickel plated firewall mount, volume-matched master cylinder, as well as a reservoir kit, lines, fittings, model-specific pedal mounting hardware, and model specific internal or external slave cylinder.
( 81 )
$639.95
—
$735.00
Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 84 )
$825.00
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 304 )
$556.95
—
$650.95
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$549.95
—
$799.95
Maximize your transmission's power potential! TCI sprag and drum assemblies are designed to reduce rotating mass without compromising drum integrity. They will hold up to five clutches and are hard coated for improved wear characteristics.
( 6 )
$517.95
—
$548.95
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$529.95
—
$799.95
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 190 )
$549.95
Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. B&M nitrous Holeshot torque converters can handle up to 650 hp and are built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates that allow these converters to stand up to the instant horsepower that nitrous delivers. Converters with higher-than-stock stall speed let your ride accelerate better from a dead stop and allow the vehicle to idle better when a big cam is used. Fully furnace brazed, heavy-duty, needle-bearing thrust packages and new turbine hubs are the key features of these converters, along with the anti-balloon plates. These are serious converters for serious street performance cars.
( 21 )
$599.95
—
$749.95
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 37 )
$961.95
$529.95
—
$749.95
RAM Powergrip HD clutch kits are the ultimate kit for extreme street and track performance. This race inspired clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 650 hp. All Powergrip HD kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip HD clutch disc features RAM's premium 900 series metallic facing material on both sides. This allows the Powergrip HD unit to deliver maximum grip in an extreme high-horsepower street or racetrack application. These RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 23 )
$549.00
On Sale
Hays Street 650 clutch conversion kits are designed to handle highly modified engines up to 650 hp naturally aspirated (600 hp for forced induction and nitrous combinations). The new 26-spline versions work in conjunction with a modern 5- or 6-speed transmission swap. These are true street/strip clutches for spirited high performance driving or frequent track use. The high performance dual-friction disc utilized in the Street 650 has an upgraded spring hub with heavy-duty damper springs to handle greater shock loads versus a standard damper spring. The disc features a sintered metallic friction surface and an organic friction surface. It does a great job at dissipating heat and fighting the slippage found in ordinary discs, along with providing the smooth engagement characteristics of a street-style clutch. These conversion kits also provide an upgraded heavy-duty pressure plate to round out the performance clutch. The Street 650 is a great choice if you visit the track often. Order the model recommended for your vehicle application. Features and benefits: * Upgraded damper springs deliver up to 30 percent more clamping pressure than stock OE clutch * Dual-friction disc offers the best of both worlds—smooth engagement and excellent holding capacity * All Street 650 clutch kits come complete with pressure plate, disc, throwout bearing, and alignment tool
( 6 )
$564.95
—
$749.95
On Sale
Hays Street 450 clutch conversion kits are an excellent upgrade offering up to 30 percent more holding power (clamping force) over your stock clutch. They're designed for handling stock to mildly modified engines—up to 450 horsepower. If drivability along with a stock pedal feel are the leading factors for your application, then order the Hays Street 450 clutch conversion kit recommended for your specific vehicle and engine size. Features, items, and specs: * Smooth, chatter-free operation using top quality organic composite friction surface material * Upgraded damper springs * Pressure plate * Clutch disc * Throwout bearing * Alignment tool * Instructions
( 8 )
$515.95
—
$570.95
Street Master torque converters are designed for the driver who is looking for a competitive advantage. By raising the stall rpm, these converters will completely eliminate slow, sluggish starts. Recommended for stock to slightly modified engines for maximum performance, they'll allow the engine to idle smoothly when the car is in gear. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 r.p.m. lower.
( 234 )
$598.99
Silver Sport hydraulic clutch master and slave kits are designed for use with the aftermarket Tremec Magnum 6-speed and Tremec T5, TKO, and TKX 5-speed transmissions. Each kit provides up to a 20 percent lighter clutch pedal effort compared to mechanical linkage, creates more room for headers, and cleans up your engine bay. The SST kits feature custom master cylinder mounts to take out the guesswork for the correct pushrod angle and an OEM-style, proprietary designed release bearing. It's rated at 7,000 rpms, has a forged aluminum housing, silicone dust boot, piston wiper seals, and a 1,000,000 cycle service life. Silver Sport complete hydraulic kits include: * Master cylinder * Master cylinder mount * Pedal pushrod/mounting components * Reservoir * Hoses * Concentric slave cylinder (slave cylinder/release bearing assembly) * Hardware * Detailed instructions
( 6 )
$649.95
B&M Transkits give you the same high-quality components that are used in all B&M Street and Strip transmissions. They include high performance friction materials, a complete overhaul gasket set, a drain plug kit, and all of the parts necessary to convert your valve body into a full manual/automatic valve body. These improvements enhance shift feel, while retaining full automatic features. The Transkits come complete with full instructions on how to assemble your transmission to B&M specifications (except BMM-70232 and BMM-70233). They also include special directions on how to modify your case, pump, and components.
( 44 )
$649.95
On Sale
Hays steel flywheels are engineered to handle extreme-duty applications and designed to take the punishment of today's high-horsepower engines. They are CAD-engineered and precision CNC-machined to strict tolerances. Available in weights up to 50 lbs. for specialized applications, most Hays flywheels are drilled with both the Borg and Beck and Long-style clutch patterns. Upgrade to a precision-machined and engineered Hays billet steel flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * CNC-machined from certified billet steel for maximum strength and durability * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch, but will accelerate faster through the gears.
( 30 )
$573.95
Hays classic clutch kits are great replacements for original equipment units. They're available for all three major clutch types, diaphragm, Borg & Beck, and Long, and feature clutch discs with sprung hubs and organic linings. There are applications for a huge range of domestic vehicles, including pony cars, muscle cars, classics, and pickups. Kits come complete with pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). Pilot bushing not included.
( 11 )
$573.95
—
$749.95
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 106 )
$1,349.95
$742.95
On Sale
Hays Street/Strip clutch kits are engineered and built as matched assemblies, using only top-quality new parts, to deliver maximum reliability and durability, as well as long-term dependability. They're available in both diaphragm and Borg & Beck styles, with sprung-hub clutch discs that have organic linings. Applications are available to fit a variety of cars and trucks aimed at street or street-and-strip use. These kits come complete with a pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). A pilot bushing is not included.
( 9 )
$599.95
—
$749.95
American Powertrain manual transmission bellhousings are designed to properly mate your transmission to the engine block. They feature all-new CNC-machined aluminum castings for tight tolerances and a precision fit. The bellhousings are available for different engines and transmission styles. Order the model recommended for your application.
( 17 )
$505.95
Centerforce DFX is their competition-proven clutch packages for select import and domestic applications. DFX Series clutches are engineered to meet competition standards of quality and craftsmanship and are aimed at high-end applications that continually demand increased integrity and holding capacity. These clutch kits score big--not only with their holding capacity and strength, but also with their race-inspired drivability. They retain an easy pedal effort, thanks to Centerforce's patented ball-bearing actuated diaphragm, for smooth engagements without detriment to the vehicle's release components. Centerforce DFX performance clutch kits utilize nodular iron pressure plate rings and reinforcements designed to help prevent drive strap breakage and safety. The DFX Series clutch kits allow end users to tailor their driving performance and style with different choices of clutches and clutch discs, from street/strip to full-on drag racing capabilities.
( 5 )
$556.95
—
$650.95
Summit Bucks
These TCI transmission Master Racing overhaul kits are designed for racers who maintain their own transmissions. They contain parts that are required when freshening up an existing competition transmission. You'll receive the high performance filter, clutches, steels, seals, gaskets, and bushings normally replaced during a rebuild. In addition, kits for late model GM overdrive transmissions also include a new performance band.
( 58 )
$515.95
Centerforce LMC Series is a specifically designed low inertia performance clutch that dramatically reduces engine rotating mass. These light weight, SFI approved competition clutches are intended with most road racing and circle track applications in mind. Centerforce machines these special pressure plates from high-strength aircraft-grade billet aluminum and then attach a special heat-treated replaceable friction surface. The Centerforce LMC Series friction disc utilizes a dual-segmented carbon composite lining for improved cooling and excellent torque capacity. Light Metal Clutch assemblies from Centerforce use their patented ball bearing actuated diaphragm and centrifugal weight system for maximum grip while maintaining a comfortable and controllable clutch pedal. When used in conjunction with Centerforce's aluminum flywheels, LMC Series brings the term lightweight to an unparalleled level.
( 4 )
$787.95
—
$839.95
Centerforce LMC Series pressure plates are specifically designed to dramatically reduces engine rotating mass. These lightweight, SFI approved competition pressure plates are intended with most road racing and circle track applications in mind. Centerforce machines these special pressure plates from high-strength aircraft-grade billet aluminum and they use their patented ball bearing actuated diaphragm and centrifugal weight system for maximum grip while maintaining a comfortable and controllable clutch pedal. When used in conjunction with Centerforce's aluminum flywheels, LMC series brings the term light weight to an unparalleled level.
( 2 )
$682.95
—
$734.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
