Availability
Showing In Stock Items. Show All 26 Items.
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 57 )
$2,174.99
B&M remanufactured Street and Strip transmissions are put together with new gaskets, bushings, seals, thrust washers, high performance friction materials, and gold zinc plated hardware. The front pump is rebuilt to B&M specs and the valve body is recalibrated. They're built for extreme conditions and are perfect replacing a worn transmission, cruising, and racing.
( 13 )
$3,749.95
—
$4,049.95
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 151 )
$2,491.95
—
$4,996.95
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 30 )
$2,122.95
—
$4,575.95
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 55 )
$2,250.95
—
$3,478.95
VEGE Remanufactured automatic transmissions enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured automatic transmissions with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Thousands of models are available, with aluminum case, torque converter included, and gear options from one through eight. Includes fluid. Get your vehicle shifting into gear with a reman auto-trans from VEGE.
( 7 )
$2,065.99
—
$3,787.99
TCI StreetFighter automatic transmission packages are durable enough to withstand the rigors of even the toughest street machines. Using the highest quality TCI manufactured components, each StreetFighter package is equipped with an automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. This gives you racetrack shifts and shaves time off your ETs. Each transmission goes through a variety of tests to verify that internal fluid pressures and shift characteristic match TCI's strict quality control standards. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected. Each transmission package consists of a triple-tested TCI transmission and precision-tuned torque converter, a universal transmission cooler and premium TCI RTF transmission fluid. These packages are available with a variety of transmission models and other performance options. Choose the package for your application needs.
( 16 )
$2,910.95
For hauling heavy loads or for taking a trip across the country, TCI heavy-duty RV transmissions were designed with you in mind. They're built for strength, and they'll provide long, dependable service, as well as delivering maximum fuel economy. They have special valve-body modifications that increase fluid flow and improve shift characteristics, without the harsh feel of racing transmissions; and they include a low-gear package for pulling heavy loads.
( 3 )
$4,127.95
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$3,113.95
—
$3,830.95
South Bend Clutch Super Street dual disc clutch kits are offered for a range of applications and setups. These clutch kits are made using high performance materials and include everything you need for your clutch installation. When it comes to street performance, you can count on South Bend for top-quality components.
( 1 )
$2,088.97
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$4,395.00
ATS Diesel Performance Stage 7 automatic transmission rebuild kits are designed to give that old worn-out transmission a face lift and put the power to the ground! ATS Diesel takes the potent Allison 1000 platform and bulletproofs it with the parts you need in these Stage 7 rebuild kits to give you the edge over the track, towing a trailer or the competition. Stage 7 kit features: * Includes Triplelok torque converter * ATS pump kit * ATS C1-C5 clutches * Valve body calibration (A and B trim valves) * ATS Co-pilot transmission controller * Increased towing capability, power holding to 1000+ hp * Best for mild street/strip and sled pulling use ATS manufactured C1, C2, C3, C4 and C5 clutch packs include: * C1 include: ATS exclusive 16 single-sided friction plates with HD pressure plate * C2 includes: Eight friction plates and eight laser-cut steel plates with step ground pressure plate * C3 includes: Five ATS exclusive full friction plates and laser-cut steel plates with micro ground pressure plate * C4 includes: Six frictions and five laser-cut steels * C5 includes: Six frictions and five laser-cut steels Note: Deep transmission pan required for Co-Pilot install.
Not Yet Reviewed
$4,308.68
ATS Diesel Performance Stage 6 automatic transmission rebuild kits are designed to give that old worn-out transmission a face lift and put the power to the ground! ATS Diesel takes the potent Allison 1000 platform and bulletproofs it with the parts you need in these Stage 6 rebuild kits to give you the edge over the track, towing a trailer or the competition. Stage 6 kit features: * Includes Triplelok torque converter * Pump calibration kit * ATS C1-C5 clutches * Valve body calibration (A and B trim valves) * Handles street/strip, sled-pulling, up to 1000rwhp and can still be daily driven * Co-pilot should be added to this kit (not included) to increase hydraulic torque capacity ATS manufactured C1, C2, C3, C4 and C5 clutch packs include: * C1 includes: ATS exclusive 16 single-sided friction plates with HD pressure plate * C2 includes: Eight friction plates and eight laser-cut steel plates with step ground pressure plate * C3 includes: Five ATS exclusive full friction plates and laser-cut steel plates with micro ground pressure plate * C4 includes: Six frictions and five laser-cut steels * C5 includes: Six frictions and five laser-cut steels
Not Yet Reviewed
$3,298.75
South Bend Clutch competition dual disc clutch kits offer SFI-approved high performance for your rig! It's important to choose the right clutch, and for drag racing or extreme sled pulling, South Bend Clutch has kits to move you across the finish line. These quality-built, heavy-duty kits are available in two different plate loads--GM kits have feramic buttons, and Dodge kits are available with or without an input shaft upgrade. South Bend Clutch competition dual disc clutch kits increase your pedal pressure to handle the higher power that makes you a winner.
( 2 )
$2,321.08
South Bend Clutch Dyna Max feramic clutch kits are manufactured with full feramic lining on a marcelled fin. The kits offer modified pressure plates for a higher plate load and smooth clutch engagement. South Bend Clutch Dyna Max feramic clutch kits help you to resolve premature disk failure from high horsepower or heavy hauling and they're available with or without a flywheel.
Not Yet Reviewed
$2,321.08
—
$3,481.61
South Bend Clutch competition triple disc clutch kits offer SFI-approved high performance for your rig! It's important to choose the right clutch. For drag racing or extreme sled pulling, South Bend Clutch has kits to move you across the finish line. Modified to handle higher plate loads, these triple-D competition kits will wear better, maintain compression longer, and warp significantly less! GM kits utilize feramic buttons and Dodge kits are available with or without input shaft upgrade. Install a clutch that can handle the higher power that makes you a winner--South Bend Clutch competition triple disc clutch kits.
Not Yet Reviewed
$3,481.61
Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 19 )
$2,291.99
TCI Circlematic automatic transmissions are great for oval track use. However, despite the sound of their name, they also can be used for performance marine applications. All transmissions feature high performance clutches, a steel clutch hub, and a modified planetary gear set that will work with the latest rear suspensions. Many specialty combinations are available.
Not Yet Reviewed
$2,250.95
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$2,159.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
