Availability
Showing In Stock Items. Show All 180 Items.
It's common for clutch hydraulic systems to become aged or weak, meaning you won't be able to select gears in the transmission. Even if your hydraulics are still working properly, if you're upgrading the clutch in your truck (or plan to), it might be time to invest in a heavy-duty hydraulic assembly from South Bend Clutch. Some factory hydraulic assemblies aren't up to the task of handling a dual-disc or even a stronger single-disc clutch. Purchasing upgraded hydraulics at the same time you order your performance clutch is highly recommended. South Bend Clutch hydraulic assemblies are engineered to enhance your vehicle's performance. They are made to stringent quality standards to ensure exceptional durability and years of trouble-free service. The kits are complete, typically including a master cylinder (adjustable on select models), slave cylinder, remote reservoir, and braided stainless steel hoses. South Bend Clutch replacement hydraulic assemblies are ready to work hard and play hard--just like your rig.
( 67 )
$362.54
—
$377.18
These BD Diesel transmission pans offer additional oil capacity to keep your hard-working transmission at the proper temperature. They are made from tough cast aluminum to prevent flexing under high-torque loads and come in a high-gloss, powdercoated finish that helps keep the contained oil cool.
( 11 )
$353.95
—
$363.95
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$549.95
$493.95
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 190 )
$389.95
—
$449.95
$350.95
—
$403.95
Behind the scenes, but still important—McLeod's 1400 Series hydraulic throwout bearings play a special role in the optimal performance of your vehicle. Their most versatile choice to fit most applications, the 1400 bearings slip right over the front collar of your transmission. They're self-adjusting, meaning that you'll never have to adjust them as your clutch wears—and they can be set for the proper mounting clearance needed. The bearings are made of the finest hard-anodized billet aluminum, and equipped with quality elbow swivel fittings and high-pressure stainless steel lines for extreme durability. What happens backstage is just as crucial as what happens out front to bring about a rousing performance. You can't see McLeod 1400 Series throwout bearings as they work, but the part they play is vital to optimize the performance of your mean street or strip vehicle.
( 37 )
$395.00
—
$499.00
Sometimes you just want steel! Lightweight alloy flywheels can offer substantial benefits for certain situations, but sometimes they're just not your cup of tea. Maybe you're on a budget, maybe you're running a heavy drag car, or maybe you just don't need those benefits. If that's the case, McLeod has the answer. Their steel flywheels deliver all of the strength and reliability that you need, at a substantially lower price. They're neutrally balanced, but are drilled to accept balance weights for use on externally balanced engines. McLeod steel flywheels available for a wide variety of large and small engines.
( 103 )
$395.00
—
$399.00
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 372 )
$340.95
$306.85
—
$479.95
McLeod StreetPro clutch kits are excellent performance clutches for street enthusiasts. StreetPros are ideal for use with basic engine modifications, including cold-air intakes, exhaust upgrades, and engine management programming. These McLeod kits provide slightly heavier pedal effort with increased holding capacity, making them excellent factory replacement performance clutches. Order the size to match your vehicle specifications. Additional features and benefits include: * Bolt to stock flywheels * Handle up to 400 hp * Organic disc facing for smooth engagement with excellent release qualities
( 162 )
$255.00
—
$415.00
These Saturday Night Specials set the standard for street performance torque converters--without the high costs. Utilizing many of the same features as more expensive torque converters, the Saturday Night Specials are fully furnace-brazed, have a new hardened pump hub, and are pressure-tested and balanced prior to shipment.
( 47 )
$531.95
Valair heavy-duty hydraulic assemblies are master/slave cylinder replacements for your diesel rig. Depending on your year, they will include fixed rod or adjustable rod for pedal/engagement adjustment. Order the model designed for your vehicle application.
( 5 )
$338.34
Pacific Performance Engineering heavy-duty transmission pans do more than hold oil--they cool and protect! They have thick cast construction from high-grade aluminum alloy. Thanks to internal and/or external cooling fins and robust side ribs, PPE transmission pans are much stronger and they allow fluid to run much cooler. Lastly, they feature an insanely strong Neodymium magnet-equipped stainless steel drain plug that attracts and holds harmful metal particles floating in your oil. Really, your pan just holds the oil? It's time for a change--upgrade to cooler Pacific Performance Engineering heavy-duty transmission pans.
( 35 )
$287.99
—
$323.99
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 37 )
$573.95
$315.95
—
$515.95
These TCI Breakaway torque converters will give you about 1,000 more rpm stall speed than stock, so you'll launch and accelerate faster. TCI remanufactures them to last with furnace-brazed fins, needle bearings, and a flame-hardened hub--the same qualities that they gave their street/strip converter.
( 107 )
$543.95
—
$548.95
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 116 )
$439.99
—
$490.99
You'll have a heavy-duty, reliable transducer when you install BD Diesel valve body electronics upgrade kits. One of the leading causes of faults with automatic transmissions is failed governor pressure transducers, especially if you run higher line pressures. These kits replace the stock plastic transducer with a sturdy metal unit that can handle greater line pressures without failing; preventing over-pressure codes and wild oscillations, thus extending transmission life.
( 12 )
$282.95
Cast flywheels are not explosion-proof and can be dangerous when used in high performance applications at higher rpm. RAM billet steel flywheels are recommended as replacements for factory-cast flywheels in high performance and racing vehicles. Made in America and produced in-house, all RAM flywheels are computer balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. They're better for launching heavier drag race cars and provide better drivability in street vehicles. SFI-approved, RAM billet steel flywheels are CNC-machined from certified materials. Order the model recommended for your year/make and engine application. Technical note: As they spin, heavy flywheels store more energy than lighter ones. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. When choosing a flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Insufficient gearing will cause an engine with too light of a flywheel to "bog" on launch.
( 132 )
$309.00
—
$359.00
McLeod Super StreetPro clutch kits are great Street/Strip performance clutches—perfect for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. Super StreetPro kits provide a heavier pedal effort than stock, along with improved holding capacity, making these excellent high performance replacement clutches. Additional features and benefits include: * SFI-approved assembly * Handle up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity
( 231 )
$325.00
—
$455.00
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 304 )
$346.95
—
$650.95
Increase the oil capacity in your transmission using ATS Diesel Performance automatic transmission pans. The additional fluid capacity is designed to help keep the transmission running cooler. Heat is the number-one enemy of a transmission, and the cooler it runs, the longer it lasts! The pans feature a finned design and magnetic drain plug and are tapped for a temperature probe. All ATS Diesel Performance automatic transmission pans are powdercoated black with a machined ATS logo and fins.
( 15 )
$309.99
—
$494.99
TCI Pro Super transmission overhaul kits contain the same parts and pieces used in building TCI Streetfighters. You will receive components normally replaced on a transmission rebuild, along with new performance frictions and steels, plus a Trans-Scat valve body kit, which enables you to change the valve body to a manual/automatic setup that delivers both a good solid shift suitable for towing applications and a competition-quality shift for drag racing. Features: * Seals, gaskets, and bushings * High performance frictions and steels * Reusable-type pan gasket * Adjustable modulator * High-volume filter * Drain plug kit * Trans-Scat valve body kit * Performance band included in 700R4, 4L60E, and 2004R kits as they normally require a band during regular repair cycles
( 87 )
$304.95
—
$397.95
RAM Muscle Car clutch kits are the perfect choice for mildly modified street cars and trucks where driveability is most important. RAM Muscle Car kits are popular for older restoration vehicles as well as late model cars and trucks with basic bolt on engine modifications such as headers and air intakes. These RAM kits offer super smooth clutch engagement and increased holding power with only a slight increase in pedal effort. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 78 )
$379.00
—
$409.00
Valair Performance heavy-duty replacement clutch kits provide the extra performance needed for enhanced diesel trucks. These kits include strong heavy-duty parts to help control the influence of your heavy right foot. Each Valair Performance heavy-duty replacement clutch kit is designed for a specific type of performance upgrade, so buy the correct unit for your needs today.
( 1 )
$467.82
The SACHS dual-mass flywheel is the key to first-class passenger car and light commercial vehicle drivability. The driver and occupants are aware of reduced driveline and body noise and enjoy smoother travel with more pleasant gear shifts. SACHS offers dual-mass flywheels for many OE applications, so be sure to check for yours when replacing the clutch.
( 2 )
$402.99
Centerforce billet steel flywheels are available for popular import and domestic vehicles, including trucks. They're CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installations. No modifications are required in combination with either Centerforce clutches or other clutch assemblies built to OEM specs. These rugged flywheels are SFI-approved, so you know that you can count on them--on the street and on the track.
( 60 )
$346.95
—
$493.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
