Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
CHEVROLET HHR Transmissions
Showing In Stock Items. Show All 58 Items.
National Bearing Automatic Transmission Selector Shaft Seals
These National Bearing automatic transmission selector shaft seals are designed to keep your transmission sealed up properly. They are manufactured from durable steel and have a rubber insert for a leak-free seal. The selector shaft seals are available to fit most automatic transmission models.
( 3 )
$7.99
South Bend Clutch Stage 2 Daily Driver Clutch Kits
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 6 )
$455.74
—
$870.51
ACDelco GM Genuine Parts Torque Converter Pulse Width Modulation Valves
ACDelco GM Genuine Parts torque converter pulse width modulation valves are manufactured to be an exact replacement for your vehicle. Genuine OE parts are recommended to deliver the peace of mind that fit, form and function is of the highest standards. Get the factory parts you need from the same source as General Motors with ACDelco GM Genuine Parts. Order the model designed for your vehicle application.
Not Yet Reviewed
$39.99
ACDelco Automatic Transmission Fluid Pan Magnets
ACDelco automatic transmission oil pan magnets are simple to use—just place them in the transmission oil pan and let them work their magic. The attractors will capture small pieces of metal before they can plug the oil filter or damage the transmission. Quality manufactured to fit your vehicle, ACDelco automatic transmission oil pan magnets will provide the same durability and service life that you expect from a General Motors factory component. Order the model recommended for your application.
( 3 )
$20.99
Clearance
ACDelco GM Genuine Parts Automatic Transmission Wiring Harnesses
ACDelco GM Genuine Partst automatic transmission wiring harnesses are a GM recommended replacement for your vehicles failing component. They are manufactured to provide you with the same performance, durability, and service life you expect from General Motors.
( 1 )
$137.99
$114.50
Fidanza Billet Aluminum Flywheels
Fidanza billet aluminum flywheels feature excellent heat dissipation and weight reduction. The replaceable friction surface is machined from 1045 steel and attached with military-grade aerospace fasteners. These flywheels are manufactured from the highest quality 6061-T6 billet aluminum and feature a 1050 heat-treated steel ring gear that's pressed on and secured with Grade 8 button screws. They also use a stepped dowel system so that when the parts are installed they're locked into place. No chromoly can compete with the awesome serviceability, strength, and superior design of Fidanza billet aluminum flywheels—available in nearly 200 models and options for applications from the 1940s and up.
( 34 )
$356.99
ACDelco GM Genuine Parts Automatic Transmission Clutch Housing Thrust Bearings
ACDelco offers GM Genuine Parts automatic transmission clutch housing thrust bearings for a wide range of Chevrolet, Oldsmobile, Pontiac, and Saturn applications. These OE replacements are designed, engineered, tested to rigorous standards, and backed by General Motors. Order the model recommended for your vehicle.
Not Yet Reviewed
$28.99
ACDelco GM Genuine Parts Automatic Transmission Electrical Connector O-Rings
ACDelco GM Genuine Parts automatic transmission electrical connector O-rings are factory-recommended replacement components. They will provide the same performance, durability, and service life you expect from General Motors. They are sold individually and as a passage sleeve seal kit. Order the O-rings designed for your transmission application.
( 1 )
$5.99
Clearance
ATP Automatic Transmission Filter Kits
ATP automatic transmission filter kits include everything you need for a fast, efficient filter change. They include all gaskets, filters, and other components that you might require. These replacement filters are specifically designed for your transmission; therefore, improper fitment is never an issue! Order the kit recommended for your application.
( 111 )
$18.99
$13.50
—
$30.99
FAG USA Pilot Bearings
FAG USA pilot bearings offer high-quality for your project. They are produced worldwide for a wide range of applications to keep the input shaft centered and drivetrain vibrations down. Choose the one you need for your vehicle.
Not Yet Reviewed
$5.99
LuK Clutch Kits
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 382 )
$306.99
South Bend Clutch Stage 3 Daily Driver Clutch Kits
South Bend Clutch Stage 3 Daily Driver clutch kits are recommended for single mass flywheel (SMF), when original design is dual mass flywheel (DMF). These clutch packages are designed for high-horsepower vehicles desiring a start performance similar to OE. The pressure plate is race engineered (SS) and SFI-approved with significant load increase over stage 1 and 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20 to 25 percent. Discs are assembled with heat-treated wear-resistant hubs, as well as drive plates and springs for high-load transfer and dependable operation. The sprung centers on the disc, in conjunction with the marcel fin between the linings, create a dual dampening effect that simulates OE start performance. A performance organic friction material with a high metal content increases torque and rpm capability—and maintains low operating temperatures, which reduce wear and glazing. South Bend Clutch Stage 3 Daily Driver clutch kits are the perfect match for your high performance street machine and occasional track use. Order the kit recommended for your application.
Not Yet Reviewed
$683.62
South Bend Clutch Stage 1 Heavy-Duty Clutch Kits
Designed for spirited and daily driving, the South Bend Clutch Stage 1 clutch kits make for a great OEM replacement when your factory clutch gives out. The pressure plate included in this clutch kit has an increased clamp load that promotes longer life, and the disc is dual dampened for smooth engagement and increased transmission life. The disc has also been designed with premium friction materials, which will ensure for rapid heat dissipation and will help to increase the life of the clutch. Select the Stage 1 HD clutch kit designed for OE replacement or your performance application.
( 17 )
$423.19
—
$742.85
LuK Clutch Flywheels
LuK solid flywheels are dynamically balanced to eliminate vibration and increase clutch performance. Manufactured to OE specifications, pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing, offering a smooth, flat surface crucial for proper clutch operation. They are engineered and built with quality materials for a longer service life. Select the disc diameter and ring gear tooth quantity needed for your application.
( 125 )
$130.99
—
$211.99
VEGE Remanufactured Torque Converters
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 53 )
$118.99
Dorman Clutch Slave Cylinders
Are you looking for a replacement slave cylinder for your clutch? Dorman has you covered with their OEM Dorman clutch slave cylinders. Dorman clutch slave cylinders deliver increased performance and reliability. Dorman has industry-leading slave cylinder application coverage that is second to none. If you want your clutch working at optimum levels, then you need one of these Dorman clutch slave cylinders.
( 74 )
$109.99
Clearance
Dorman Transmission Pans
Dorman transmission pans are the perfect OE replacements for those rust-prone parts. Some things just don't last forever. So, when it's time to replace your transmission pan, look to Dorman for the qualities, fit, and function you need to keep your vehicle on the road. Check and service your parts often and replace them with Dorman.
( 89 )
$65.95
ATP Automatic Transmission Control Solenoids
ATP automatic transmission control solenoids are designed to replace faulty factory units and keep your transmission shifting smoothly. They're available in a variety of configurations for dozens of transmission types—on thousands of vehicle applications. These replacement solenoids meet or exceed OEM specifications.
( 1 )
$30.99
—
$70.99
Clearance
Dorman Shift Interlock Solenoids
Save time, money, and labor with Dorman shift interlock solenoids. Now you can replace just your solenoid without the expense and hassle of installing a complete shifter assembly. Features and benefits: * Restore ability to shift out or "park" when brake is depressed * Direct-fit for a trouble-free installation * Reduce repair cost--replace the part, not the assembly * Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards Let Dorman's 96 years of experience get you back on the road and save you money all at the same time!
( 1 )
$75.99
$64.50
Clearance
Dorman Clutch Master Cylinders
Did you know that most manual transmission vehicles have two master cylinders? One is for the brakes, and the other works with the clutch. Dorman clutch master cylinders can help cure hard shifts, mushy clutch pedals, and useless pedals lying down on the job. They deliver increased performance and durability. Their industry-leading application coverage is second to none. If you want your manual transmission performing at optimum levels, replace your original clutch master cylinder with an upgrade from Dorman!
( 27 )
$77.99
South Bend Clutch Stage 3 Endurance Clutch Kits
South Bend Clutch Stage 3 Endurance clutch kits are recommended for single mass flywheel (SMF) when original design is DMF (dual mass) to achieve optimal performance. These kits use the same race-engineered SFI-approved pressure plates as Stage 3 Daily Driver packages. The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar® friction material is used for its unique friction compounds applied with high-energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. These Stage 3 Endurance clutch kits are recommended for applications such as rally, endurance race, club sport, autocross, performance street and daily driving. Order the kit you need.
( 2 )
$846.39
—
$976.59
South Bend Clutch Stage 2 Drag Race Clutch Kits
South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$911.49
—
$1,062.00
South Bend Clutch Stage 2 Endurance Clutch Kits
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 3 )
$553.40
—
$998.17
Pioneer Flexplates
Flexplates are important connections between your engine and torque converter, and are relatively inexpensive parts to change out when they demonstrate signs of wear. These one- or 2-piece Pioneer replacement flexplates are machined from durable steel for long-lasting performance. They're available in a wide variety of configurations for fitment with engine and transmission applications spanning six decades.
( 73 )
$44.99
