Availability
Showing In Stock Items. Show All 80 Items.
Is it time for an overhaul? USA Standard Gear transfer case bearing kits provide the bearings and seals needed to refresh your transfer case. Perform your maintenance with transfer case bearing kits from USA Standard Gear.
( 25 )
$99.99
—
$249.99
Have you ever heard someone say, "I can't get this dang thing into 4-low"? Crown Automotive transfer case rebuild kits are available for most Jeep models with small parts through master overhaul designs. The parts in these kits are OE quality for excellent fit and reliability. Make certain to check the notes for the correct unit for your application. Transfer cases are strongly built for years of service, but occasionally need rebuilt. Crown Automotive transfer case rebuild kits have the parts you need to do the job right.
( 16 )
$76.99
—
$246.99
Trail-Gear offers transfer case rebuild kits for a variety of applications, including many Toyota and Suzuki trucks from the 1970s, '80s, and '90s. Kits contain all minor gaskets, seals, and bearings for Toyota gear-driven transfer cases from 1979-95. Only top-quality Toyota OEM gaskets are used. Bearings include SKF, NSK, NACHI, and KOYO. Does not include flange nuts, or needle bearings.
Not Yet Reviewed
$139.99
—
$499.99
These Motive Gear transfer case rebuild kits will help you get out on the road or trail. These kits include everything you need to refresh your transfer case and get it working efficiently again. Motive Gear offers these transfer case rebuild kits for a variety of vehicles and transfer case configurations, so all you have to do is find the right one for your ride.
( 5 )
$130.99
—
$217.99
Clearance
Rein Automotive offers transfer case overhaul kits for a variety of applications—including BMWs from 2008 and up. These are "solution kits" developed to perform a complete overhaul of the X-Drive transfer case damaged from overheating or lack of service. The complete rebuild kits include bearings, clutch packs, shims, magnets, retainers, hardware, seals, and other necessary internal components. Until now, the only solution to repair these failure-prone transfer cases was to replace with a complete assembly at the dealer or install a used assembly at the local shop. No other options were available due to no offering for internal components. All the components offered in Rein transfer case overhaul kits are OE, identical to the original parts on the vehicle direct from the factory. Order the model recommended for your vehicle.
Not Yet Reviewed
$1,374.99
$1,016.50
RT Off-Road slip yoke eliminator kits will keep your vehicles moving in the right direction. These kits include the necessary parts to convert the 231 transfer case to a rear fixed-style yoke, which not only provides great strength, but extends driveshaft length approximately 4 in., while reducing the angle. RT Off-Road provides a CV-style yoke, knowing that this style of driveshaft eliminates driveline vibrations and extends life. A properly lifted Jeep with the right aftermarket parts can explore all types of terrain. Keep from screaming for your life with RT Off-Road slip yoke eliminators.
( 4 )
$223.99
—
$551.99
The Jeep NP231 is one of the most popular transfer cases, but it creates an extremely short rear driveshaft. These fixed yoke kits from Advance Adapters add 3 to 4 in. to the rear driveline length on a YJ, and up to 6 in. on a TJ. This results in a better driveshaft angle, eliminated driveline vibrations, and a transfer case that's ideal for trail use.
( 62 )
$258.76
Maintain proper driveline angles on your truck, SUV, or Jeep by installing a BDS transfer case drop kit. These new kits utilize one-piece, heavy-duty steel brackets or tube spacers, E-coated for durability and corrosion resistance, to drop the T-case to reposition the output shaft on lifted applications. The transfer case drop kit is sometimes required if you experience a slight driveline vibration. Choose the kit designed for your vehicle.
Not Yet Reviewed
$20.95
—
$38.95
TeraFlex NP231 short shaft kits, or slip yoke eliminators, with new heavy-duty shafts, are engineered to withstand the 50 percent increase in torque generated by the extreme reduction of the Tera Low231 gears. These kits also eliminate the need to lower the transfer case in most cases by increasing the rear driveshaft length by 4 in. They include a larger output bearing and rear housing.
( 1 )
$299.99
Advance Adapters NP231 fixed yoke kits feature a new 1 3/8 in. - 32 spline rear output shaft, 356-T6 heat-treated aluminum alloy tail housing, bearings, fastening hardware, and detailed instructions. NOTE: At the time of order you have to purchase a yoke separate. Please choose one of the following: * 716295 1310 non-CV yoke * 300472 1350 non-CV yoke * Flange-style yoke are available at an additional cost
( 4 )
$241.19
Abuse and general wear and tear over time will take its toll on your hubs. Mile Marker hub service kits provide the correct parts for maintaining their locking hubs and getting your vehicle back on the trails. Most of these kits include new hardware, snap rings, and O-rings designed to bring new life to your hubs. Freshen up your hubs with Mile Marker hub service kits.
( 5 )
$29.00
TeraFlex 2WD low-range kits let you gear down to power up. The 2Low kits are great little mods that allow low-range 2WD--imagine being able to steer in low range! You will have all of the benefits of true low-range gearing, while allowing the front to turn freely. They eliminate drivetrain bind and most of your 3-point turns. These kits are completely internal and do not require any external modifications. Make good use of your engine power with TeraFlex 2WD low range kits.
( 3 )
$115.99
Rough Country transfer case drop kits allow for better driveshaft angles reducing driveline vibration. They offer easy bolt-on installation and include hardware. Select the kit designed for your vehicle.
Not Yet Reviewed
$39.95
—
$69.95
The Jeep NP231 is one of the most popular off-road transfer cases, but it creates an extremely short rear driveshaft. These slip yoke eliminator kits from Skyjacker add 3 to 4 in. to the rear driveline length on a YJ, and up to 6 in. on a TJ. You get a better driveshaft angle, eliminate driveline vibrations, and reduce the possibility of accidental driveshaft separation. With this conversion, you end up with a significantly stronger transfer case that is ideal for trail use.
Not Yet Reviewed
$405.49
Get rock-crawling control with the addition of Trail-Gear reduction gears. Lower case gears can provide the enhanced trail performance you want, and these reduction gears are precision-ground and micro-polished to do just that—at an affordable price. Gears, gaskets, seals, and possibly more (depending on the gear set chosen) are available, as well as a choice of spline configurations. Keep your rig in high performance with Trail-Gear low-range climbing reduction gears.
( 7 )
$399.99
—
$599.99
These Rugged Ridge transfer case Mega slip yoke eliminator kits are designed to be used in the same lift applications as the other standard SYE kits. The main advantage to these kits is that they allow for a much longer driveshaft to be used--an additional 3 in. This reduces driveshaft angle, improves bearing and U-joint life, and reduces driveline vibrations. They also have a shorter and stronger main shaft design with improved oiling. They will not work with cable-driven speedometers and are not for use on Rubicon models.
Not Yet Reviewed
$599.99
Low range gears are critical for technical off-road driving. Trail-Gear's Samurai low range gear kit is the highest quality gear set available. Low range reduction is 4.90:1 (115 percent low range reduction). High range reduction is 16 percent. No welded or second-rate gears here. These are strong, run quiet, and take a huge amount of abuse. The complete kits include four new precision-cut gears, counter shaft, needle bearings, shims, O-ring, gaskets, and input/output seals. (Heavy-duty front output shaft is recommended. Minor grinding of case is necessary for installation.) Specifications/details: * Heavy-duty Samurai transfer case output shaft recommended * Made from Japanese SCM415 alloy for its great strength and wear resistance * SCM415 outperforms the 8620 material in yield and ultimate tensile strength * Note: The recommended tire size for the 4.90 gears is 30-31 in.
Not Yet Reviewed
$499.99
Motive Gear offers Ten Factory slip yoke eliminators for a variety of Jeeps, cars, and trucks spanning several decades. Precision-forged for quality, strength, and performance, all Ten Factory axles are backed by the company. Front axles and two axle rear kits are black oxide coated. Ten Factory is the brand you can trust for the highest quality engineered axle shafts and replacement kits. Built with the toughest materials, the wear resistance of forged steel is heat-treated to produce durable axle shafts for your vehicle. Buy with confidence knowing that the latest technologies in metallurgy, heat-treating and CNC-machining have produced an axle you can count on in the most difficult conditions. Order the transfer case slip yoke eliminator kit recommended for your application.
Not Yet Reviewed
$488.99
B&M heavy-duty transfer case shift cable conversion kits replace the failure-prone Z-linkage with zinc-plated steel ends and a bigger (.425 in.) cable to provide solid, long-lasting transfer case gear selection. The 48 in. long cable is an excellent option for lifted builds and the powdercoated brackets will provide years of trouble-free shifts. The cable is compatible with the factory shifter but complements any aftermarket shifter designed to use a factory cable. Features: * Replaces the stock Jeep TJ cable and plastic ends for reliable, positive shifts * Heavy-duty .425-inch cable and 6061 aluminum ends provide a trouble-free, performance upgrade * Perfect solution for Jeeps with suspension and or body lifts * Compatible with factory shift lever for budget friendly replacement * Heavy-duty powdercoated brackets provide excellent resistance to the elements
( 13 )
$179.95
—
$186.95
Take your trail running and rock crawling experience to the next level with these transfer case adapter kits from Trail-Gear! The adapter plates are CNC-machined from 6061 T-6 aluminum and are designed to allow you to mount one or more gear-driven transfer case(s) in your 1995-2004 2.7L/3.4L Tacoma. These cases are known for their strength, reliability, and configuration flexibility. Oh, the places you can go with quality Trail-Gear components!
( 1 )
$599.99
Go from forward shift to top shift with Trail-Gear Top Shift conversion kits. TG's conversion "C" kits are the most complete packages for those of you running a dual T-case setup. These kits contain all new parts and are machined to accept 4.7 input gears. Trail-Gear Top Shift "C" conversions include everything you need—even a twin stick—to accomplish your conversion properly. These kits include: * Shift rails * Shift fork * Shift fork tube * Roll pins * Twin stick shift kit * T-case block off plate * Gaskets
Not Yet Reviewed
$379.99
Go from forward shift to top shift with Trail-Gear Top Shift conversion kits. TG's conversion "B" kits are for those of you running a dual T-case setup. You need to block off the unused hole and you'll need a new top shifting shifter. These "B" kits contain what you need to accomplish your conversion properly. The parts are all new and machined to accept 4.7 input gears. Trail-Gear Top Shift "B" conversions include shift rails, fork, fork tube, and roll pins—plus, T-case shifter kit, block-off plate, and gaskets.
Not Yet Reviewed
$279.99
Mount your transfer kit properly with an Advance Adapters transfer case stud kit. No need to search for the correct mounting hardware to finish your transfer case replacement. This OEM-grade fastener kit includes the necessary flange nuts—and they even add thread sealant to keep things secure.
( 16 )
$23.10
Advance Adapters has developed these heavy-duty cable shifter upgrade kits to ensure that you don't get stuck in a range you don't need again. These kits address the weak point in most 4WD systems--the transfer case shifter cable. Advance Adapters made these heavy-duty shifter cables stronger to withstand shift after shift without fail. This is made possible by the stronger mounting points and a heavy-duty cable that will not wear out like the stock unit. Have some peace of mind on the trail with these Advance Adapters heavy-duty cable shifter upgrade kits.
( 3 )
$213.63
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
