Filters
Advance Adapters NP205 transmission to transfer case couplers will allow you to match up your transmission to your transfer case.
( 7 )
$92.25
USA Standard Gear transfer case input shafts are the choice for installers when quality is essential and price is a factor. Available for several applications, these components are the means by which your transfer case moves power from the transmission to the axles. Rebuilding or repairing, USA Standard Gear transfer case input shafts offer the right choice at the right price to keep your vehicle moving.
( 1 )
$111.99
—
$120.99
Available in a choice of thicknesses, Advance Adapters Atlas transfer case spacers can be used to alleviate fitment issues caused by variations in transmission output shaft lengths. Many transmissions have positive "stick-outs" on their output shafts concerning the edge of the rear tail housing or adapter, which can cause a bottoming-out effect when installing an Atlas. Sometimes the output shaft can be trimmed back, but not always. You can relieve those "unable to trim" fitment issues with the Advance Adapters Atlas transfer case spacers designed for your application!
( 3 )
$88.60
Mopar Replacement offers a variety of transfer case components for specified model applications. Parts include drive chains, sprockets, bushings, shafts, retainers, oil filters, springs, seals, and more! Manufactured from high-quality materials, these genuine OE replacements are designed for the same fit and function as the originals.
( 7 )
$56.99
—
$65.99
Summit Bucks
Timken transfer case bearings are manufactured with the highest quality steel to the highest quality standards. They're available in a wide range of designs and are custom-tailored to specific applications and operating conditions. The rugged design of these transfer case bearings provides you with proven performance.
Not Yet Reviewed
$59.99
—
$104.99
If you're looking for transfer case components like range forks, Motive Gear has what you need. They use only the highest quality materials to manufacture their equipment and have been providing aftermarket parts for over 65 years. When it comes to using transfer case components you can depend on time and time again, Motive gear has you covered.
( 15 )
$61.99
—
$111.99
Pacific Performance Engineering transfer case pump upgrades cure the dreaded "pump rub." This occurs when the five positioning tabs holding the pump in place wear over time, causing the oil pump to come into contact with the housing itself. The result is a hole in your cover, leaking fluid, and the possibility of heavily damaging the transfer case. PPE transfer case pump upgrade kits consist of a new pump cover that offers a more secure method of mounting the pump, plus all the necessary gaskets. Order the kit recommended for your transfer case model.
( 4 )
$67.49
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 31 )
$50.99
—
$107.99
ACDelco offers GM Genuine Parts transfer case rod assemblies for a wide range of trucks. Your transfer case transmits power from the transmission to the front and rear axles by means of driveshafts. It also synchronizes the difference between the rotation of the front and rear wheels. These replacement shift linkages are a key component in the assembly—designed, engineered, tested, and backed by General Motors. They are OE parts validated specifically for Chevrolet, Buick, GMC, and Cadillac vehicles. Order the transfer case rod assembly recommended for your application.
( 3 )
$71.99
Replace your worn-out or damaged transfer case housing with one of these Dorman transfer case housings. They're made from durable OEM materials, built to factory specifications and tolerances to ensure a direct fit installation. The housings are available for a wide variety of transfer case models, so we're sure to have your application covered.
( 31 )
$74.86
—
$87.95
Advance Adapters offers a variety of overdrive replacement components—including these T90 transfer case dual handle shifters. They're available for many Jeep and truck applications, from the 1940s and up.
( 1 )
$92.40
Chevrolet Performance transfer case components are manufactured to be exact replacements for your vehicle. They include a complete range of parts from adapters and bushings to pump house repair sleeves and vents. These replacement parts are produced using the latest technology to deliver the reliability and durability you expect from Chevrolet Performance. And, because they are GM original equipment replacements, you can be rest assured of premium quality, as well as peace of mind that the parts will fit, form, and function to meet their high standards and yours.
Not Yet Reviewed
$100.99
ACDelco GM Genuine Parts transfer case shift cables are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These shift cables connect the transfer case shifter lever to the transfer case mechanism, offering benefits like improved shifting action, and smoother, more controlled shifting experience by replacing problematic factory linkages. GM Genuine Parts are the true Original Equipment parts installed during the vehicle's production of or validated by General Motors.
Not Yet Reviewed
$61.99
Is it time for an overhaul? USA Standard Gear transfer case bearing kits provide the bearings and seals needed to refresh your transfer case. Perform your maintenance with transfer case bearing kits from USA Standard Gear.
( 22 )
$118.99
You'll need an Advanced Adapters Jeep crossmember mount kit when using one of their transfer case adapters. Unlike other company-designed mounts using a soft car type rubber cushion, Advanced mounts are designed with the weight of the transfer case in mind. These Jeep Wrangler crossmember mount kits support heavier loads and easily adapt to the existing skid plate location.
Not Yet Reviewed
$65.13
—
$73.08
Fit your transfer case with new Alloy USA transfer case drive chains. These premium chains feature their round pin technology, offering greater articulation than the standard rocker pin design. They're built from high-tensile strength steel to endure peak loads under heavy operating conditions. Don't replace your chain--upgrade to Alloy USA transfer case drive chains.
( 3 )
$96.99
OMIX-ADA transfer case replacement components are manufactured by a community of enthusiasts dedicated to producing the finest in off-road solutions. OMIX-ADA products have been propelling 4WD vehicles down highways, back roads, and over the world's roughest terrain for about two decades. OMIX-ADA's team of engineers has developed, tested, and trail-ridden many of their products until they were perfected for you. So, when you're looking for transfer case replacement components, choose OMIX-ADA.
( 2 )
$63.99
—
$102.99
Trail-Gear offers transfer case top shift bases for a variety of applications—including Toyota models from the 1970s, '80s, and '90s. The OEM replacement shift bases are designed for a single shifter on your gear-driven, top shift transfer case. Order the model recommended for your vehicle.
( 1 )
$71.73
Advance Adapters Saturn overdrive shifter kits contain the necessary components to complete your project. Their shift linkage universal shift kits allow various transmission options, and should be used when coupling a Saturn overdrive to a vehicle that is not equipped with the factory transmission. Their T14 3-speed Saturn shift kits, as well as their T90/T86 with single stick Dana 18, and T90 dual lever shifter kits work with their respective transmissions. Move your Saturn overdrive in gear with Advanced Adapters shifter kits.
Not Yet Reviewed
$92.40
Crown Automotive transfer case shift cables are designed to secure in place as easily as the stock parts. Built to OE specs, you can install them as an upgrade or as a replacement for your worn or malfunctioning factory original. These transfer case shift cables are made from high-strength material to deliver unparalleled endurance—even in the most demanding situations! Order the model recommended for your application.
Not Yet Reviewed
$66.99
USA Standard Gear transfer case drive sprockets are the choice for installers when quality is essential and price is a factor. Your transfer case is made up of many components, and maintaining those parts is crucial to keep your case in optimal operating condition, but it can get pricey. USA Standard Gear drive sprockets supply the right fit with the right function at the right price to keep your vehicle moving on and off-road.
Not Yet Reviewed
$65.99
Trail-Gear heavy-duty transfer case mounts can handle the abuse of rock crawling and the ultra-low torque of dual cases. Stamped out of 1/4 in. thick steel plate and then welded on a jig to ensure the best fit possible, these mounts are fitted with polyurethane bushings and coated with zinc for lasting performance and durability. Eliminate the worries of a busted T-case mount on the trails with the installation of bomb-proof Trail-Gear heavy-duty transfer case mounts.
( 5 )
$64.12
OMIX-ADA transfer case bearings provide OEM quality at an affordable price. Your transfer case gets power to your axles, and problems could leave you stranded. OMIX-ADA transfer case bearings, as with all their Jeep parts, offer perfect fit and function to keep you moving.
Not Yet Reviewed
$54.99
—
$56.99
Lares transfer case motors are engineered to OE specifications to ensure proper fit and function. The transfer case motors are available in a variety of styles and configurations; order the model recommended for your vehicle.
Not Yet Reviewed
$106.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
