Filters
Trail-Gear offers Trail-Creeper 2.28 crawl boxes—ready to bolt onto the front of a top shift-style, gear driven Toyota transfer case. Transfer cases are made from two basic sections, the reduction section and the 4WD section. To build a dual transfer case, two reductions boxes are bolted back-to-back with a dual case adapter. These two are then bolted to a 4WD section. Available with 21 or 23 spline input and output gears, each unit is completely rebuilt and inspected, and has a low range gear ratio of 2.28. Whether you're looking to maintain, optimize, or upgrade, choose Trail-Gear for the quality parts and kit components that you need to give you confidence while driving through even the most difficult obstacles. Important Note: Floorboard and drive shaft modifications are required for dual transfer case installation.
( 3 )
$1,154.85
Trail-Gear dual transfer case adapters enable you to install a Mini Truck Crawl Box. These reliable kits greatly increase the oil flow in and around the adapter for cooler operation, and Trail-Gear has also increased the strength of the casting by making the walls thicker. All necessary installation hardware, including nuts with factory thread lock adhesive, and instructions are included. Choose the kit made for your vehicle.
Not Yet Reviewed
$1,105.23
Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 7 )
$1,004.99
—
$1,646.99
The Dana 18 kit fits large hole transfer cases only. This 4-gear kit require the shortening of the shift rod for intermediate gear clearance. A slight amount of internal case grinding may be necessary. CJs 1965 and older will require the use of a case from either a 1966 to 1971 CJ, 1963 to 1979 Wagoneer/pickup (Dana 20), or a 1972 to 1979 CJ (Dana 20). If a Dana 20 T/C is to be used with the Dana 18 components, you will still be able to retain your stock driveshaft offset. For Warn and Saturn O.D. owners, we offer a complete gear set to retain your overdrive using the 3.15:1 low gears. We also offer just the Saturn overdrive bowl gear if you have already obtained your low gear set.
Not Yet Reviewed
$1,199.99
Dorman power take-off assemblies are 100 percent new, not remanufactured, and rigorously tested for long-lasting durability and an extended service life. These PTOs transfer high-power and torque from your vehicle's engine or off a gear in the transmission to auxiliary components to reach peak vehicle speeds. They are direct replacements and easily connect to mating driveshaft on the application end. Restore drivability and all-wheel drive (AWD) functionality with Dorman power take-off assemblies.
( 1 )
$1,141.99
Rein Automotive offers transfer case overhaul kits for a variety of applications—including BMWs from 2008 and up. These are "solution kits" developed to perform a complete overhaul of the X-Drive transfer case damaged from overheating or lack of service. The complete rebuild kits include bearings, clutch packs, shims, magnets, retainers, hardware, seals, and other necessary internal components. Until now, the only solution to repair these failure-prone transfer cases was to replace with a complete assembly at the dealer or install a used assembly at the local shop. No other options were available due to no offering for internal components. All the components offered in Rein transfer case overhaul kits are OE, identical to the original parts on the vehicle direct from the factory. Order the model recommended for your vehicle.
Not Yet Reviewed
$1,043.99
—
$1,263.99
Ford Genuine Parts transfer cases are designed to exact specifications as the factory part on your Ford vehicle for proper form, fit, and functionality. These genuine replacement parts fit the same as the original factory part because they're made by the original equipment manufacturer. A transfer case in a 4WD or AWD vehicle provides several key benefits, primarily related to improved traction and control. It allows power to be distributed to all four wheels, enhancing performance in challenging conditions like mud, sand, and snow. This is especially valuable for off-road driving and navigating slippery surfaces. Get the genuine replacement parts you need with the correct fit and performance you expect with Ford Genuine Parts.
Not Yet Reviewed
$1,548.99
USA Standard Gear transfer case housings protect your transfer case. The housing is constantly exposed to the elements, and can also experience "pump rub" on the inside. These replacements are offered for a variety of transfer case models, front and rear half. USA Standard Gear housings offer great quality and value. Order the model recommended for your application.
( 4 )
$1,008.99
Prepare your rig to conquer every road challenge! Extra performance begins with a lower gear ratio inside your transfer case--and that's where Advance Adapters low-range gear sets take over! No matter what you're driving, there's no question that climbing hills and tackling the "big" stuff requires considerably more power and torque. Now you'll have assistance in soaring to the next level: an Advance Adapters low-range gear set.
( 1 )
$1,059.99
Advance Adapters transfer case adapters will save you a lot of time and headaches. They allow you to retain the stock location of your transfer case for a quicker, easier transmission swap. The adapters are made from high-quality materials for excellent durability.
( 93 )
$1,096.20
—
$1,162.98
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
