Filters
The Jeep NP231 is one of the most popular transfer cases, but it creates an extremely short rear driveshaft. These fixed yoke kits from Advance Adapters add 3 to 4 in. to the rear driveline length on a YJ, and up to 6 in. on a TJ. This results in a better driveshaft angle, eliminated driveline vibrations, and a transfer case that's ideal for trail use.
( 61 )
$276.82
Is it time for an overhaul? USA Standard Gear transfer case bearing kits provide the bearings and seals needed to refresh your transfer case. Perform your maintenance with transfer case bearing kits from USA Standard Gear.
( 22 )
$118.99
—
$247.99
Advance Adapters transfer case adapters will save you a lot of time and headaches. They allow you to retain the stock location of your transfer case for a quicker, easier transmission swap. The adapters are made from high-quality materials for excellent durability.
( 93 )
$109.62
—
$283.87
B&M heavy-duty transfer case shift cable conversion kits replace the failure-prone Z-linkage with zinc-plated steel ends and a bigger (.425 in.) cable to provide solid, long-lasting transfer case gear selection. The 48 in. long cable is an excellent option for lifted builds and the powdercoated brackets will provide years of trouble-free shifts. The cable is compatible with the factory shifter but complements any aftermarket shifter designed to use a factory cable. Features: * Replaces the stock Jeep TJ cable and plastic ends for reliable, positive shifts * Heavy-duty .425-inch cable and 6061 aluminum ends provide a trouble-free, performance upgrade * Perfect solution for Jeeps with suspension and or body lifts * Compatible with factory shift lever for budget friendly replacement * Heavy-duty powdercoated brackets provide excellent resistance to the elements
( 10 )
$159.95
Have you ever heard someone say, "I can't get this dang thing into 4-low"? Crown Automotive transfer case rebuild kits are available for most Jeep models with small parts through master overhaul designs. The parts in these kits are OE quality for excellent fit and reliability. Make certain to check the notes for the correct unit for your application. Transfer cases are strongly built for years of service, but occasionally need rebuilt. Crown Automotive transfer case rebuild kits have the parts you need to do the job right.
( 16 )
$114.99
—
$249.99
Advance Adapters Atlas transfer case adapters provide the fit, form, and function to help bolt a transmission onto your vehicle. They feature high-quality materials and strict design requirements that meet or exceed OE specifications—critical to ensuring an easy installation and dependable operation. Choose the Advance transfer case adapter recommended for your transmission application.
( 6 )
$212.89
—
$275.54
B&M heavy-duty transfer case shift cables are a must for select Jeep Wrangler JK owners from the early 2000s and up. These cables replace the failure-prone plastic ends with 6061 aluminum ends and a bigger (.425 in.) cable to provide solid, long-lasting transfer case gear selection. The 37 in. long cable is an excellent option for lifted builds, and the powdercoated brackets will provide years of trouble-free shifts. These cables are compatible with the factory shifter but complement any aftermarket shifter designed to use a factory cable. Features at a glance: * Replaces the stock Jeep JK cable and plastic ends for reliable, positive shifts * Heavy-duty .425 in. cable and 6061 aluminum ends provide a trouble-free, performance upgrade * Perfect solution for Jeeps with suspension and or body lifts * Compatible with factory shift lever for budget friendly replacement * Heavy-duty powdercoated brackets provide excellent resistance to the elements
( 1 )
$164.95
USA Standard Gear transfer case input shafts are the choice for installers when quality is essential and price is a factor. Available for several applications, these components are the means by which your transfer case moves power from the transmission to the axles. Rebuilding or repairing, USA Standard Gear transfer case input shafts offer the right choice at the right price to keep your vehicle moving.
( 1 )
$111.99
—
$174.99
Prevent front driveline issues on your lifted truck with the BDS transfer case indexing ring kits. At 6 in. of lift and above it is necessary to index the transfer case to allow the front driveline to reconnect and eliminate vibrations. BDS T-case index ring kits have optimal spline engagement and are dual-drilled to allow positioning for compatibility with a range of lift heights. Rounding out each kit is a billet aluminum driveshaft spacer and all the hardware needed to complete the installation. Key features: * Indexing rings eliminate front driveline vibrations * Proper clearance prevents cross-member interference * Heavy-duty steel construction for maximum strength * Designed with optimal spline engagement to prevent transmission to transfer case damage
( 1 )
$193.95
—
$277.95
Gain independent control of your transfer box with Advance Adapters twin-stick shifters. They provide the construction, materials, and parts you need for dependability and installation ease. Advance Adapters twin-stick shifters make transfer case shifting easier and provide other gear selections like 2WD or 4WD, high or low, and rear or front-wheel drive.
( 2 )
$198.32
—
$250.34
ACDelco GM Genuine Parts transfer case adapters are manufactured to be an exact replacement for your vehicle. They are GM original equipment replacements, meaning you can rest assured of premium quality, as well as peace of mind that the fit, form, and function meet their high standards and yours.
( 1 )
$162.99
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$101.99
—
$259.99
Advance Adapters has developed these heavy-duty cable shifter upgrade kits to ensure that you don't get stuck in a range you don't need again. These kits address the weak point in most 4WD systems--the transfer case shifter cable. Advance Adapters made these heavy-duty shifter cables stronger to withstand shift after shift without fail. This is made possible by the stronger mounting points and a heavy-duty cable that will not wear out like the stock unit. Have some peace of mind on the trail with these Advance Adapters heavy-duty cable shifter upgrade kits.
( 3 )
$211.90
Advance Adapters NP231 fixed yoke kits feature a new 1 3/8 in. - 32 spline rear output shaft, 356-T6 heat-treated aluminum alloy tail housing, bearings, fastening hardware, and detailed instructions. NOTE: At the time of order you have to purchase a yoke separate. Please choose one of the following: * 716295 1310 non-CV yoke * 300472 1350 non-CV yoke * Flange-style yoke are available at an additional cost
( 4 )
$241.19
OMIX-ADA twin stick transfer case shifters are designed to allow for easier transfer case shifting and other gear selection options, like 2WD low and front-wheel drive. They feature quality, durable components matched to your specific transfer case model.
( 5 )
$151.99
Chevrolet Performance transfer case components are manufactured to be exact replacements for your vehicle. They include a complete range of parts from adapters and bushings to pump house repair sleeves and vents. These replacement parts are produced using the latest technology to deliver the reliability and durability you expect from Chevrolet Performance. And, because they are GM original equipment replacements, you can be rest assured of premium quality, as well as peace of mind that the parts will fit, form, and function to meet their high standards and yours.
Not Yet Reviewed
$100.99
Building on decades of experience using reverse engineering to remanufacture automotive motors, Cardone engineers have meticulously designed and tested their brand-new transfer case motors to match OE fit and performance. Each unit is load-tested to ensure the torque power specification meets industry standards. As direct-fit replacements, Cardone transfer case motors provide ease of installation and reliability you can count on. They're available in a variety of styles and configurations; order the model recommended for your vehicle. Additional details: * Designed to deliver the precise amount of power to the transmission for a smooth transition when changing from 2WD to 4WD * Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life
( 3 )
$129.99
—
$191.99
Trail-Gear transfer case shifters are stock replacement shifter handles and base. Get back in gear faster with these shifters. They bolt in using your stock bolts and fit the top shift gear drive transfer cases on the vehicles noted in applications.
( 1 )
$147.07
—
$229.67
Replace your worn-out or damaged transfer case housing with one of these Dorman transfer case housings. They're made from durable OEM materials, built to factory specifications and tolerances to ensure a direct fit installation. The housings are available for a wide variety of transfer case models, so we're sure to have your application covered.
( 31 )
$225.95
Dorman transfer case motors are designed to meet or exceed OEM specifications for your electronically shifted transfer case. The transfer case motors are all-new units, not rebuilt or remanufactured, to ensure top quality and performance.
( 63 )
$108.95
—
$250.95
Help engage or disengage your vehicle's 4WD system with one of these Dorman transfer case shift linkages. The control levers are constructed of corrosion-resistant metal for long lasting durability and their bushings ensure smooth operation. Dorman gives you direct replacement for a proper fit every time.
( 4 )
$149.95
BD Diesel 2 Low Unloc differential kits disable the vacuum-controlled automatic front hubs on 4WD trucks. This enables the transfer case to be shifted into low range for the rear wheels only.
( 1 )
$190.95
Go from forward shift to top shift with Trail-Gear Top Shift conversion kits. TG's conversion "A" kits contain the parts you need to accomplish your conversion properly. The parts are all new and machined to accept 4.7 input gears. Trail-Gear Top Shift "A" conversions include shift rails, fork, fork tube, and roll pins.
( 2 )
$214.10
The lower the gear, the higher the torque; you need Trail-Gear heavy-duty output shafts! These front shafts upgrade your old gear with the strength to handle lower transfer case gears and jumping on the throttle. Don't wait until you hear the popping of gears about to fail! Installation is easy--only the front output cover needs to be removed to install these TG gears. Get your rig trail ready with the addition of Trail-Gear heavy-duty output shafts!
Not Yet Reviewed
$181.85
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
