Availability
Showing In Stock Items. Show All 55 Items.
Currie 9-inch third members are designed to fit Ford 9-inch applications. The case is made from nodular iron and installed is a Currie TwinTrac® posi differential in 31 spline, or Eaton TrueTrac differential in the 35 spline options. All Currie third members include a big bearing "Daytona" pinion support, are fully assembled, and delivered ready to install.
( 5 )
$1,400.00
—
$2,000.00
Moser Engineering pinion supports for Ford 9 in. cases are lightweight, heavy-duty, and machined from solid aluminum blanks. They are set up for oversized tapered bearings.
( 4 )
$170.00
—
$225.00
ARP has designed these pinion support stud kits to offer maximum clamping force and unmatched reliability. They are available in hex or 12-point studs, so you can choose what's best for your style of pinion support. Whether you choose standard black oxide steel or stainless steel, ARP pinion support stud kits offer optimum durability for maximum drivetrain performance.
( 15 )
$24.99
—
$57.99
Moroso Ford 9 in. differential rebuild kits contain: * Housing gasket * Pinion shaft seal * 9 pinion support shims * 8 pinion preload shims for use with aftermarket aluminum pinion supports * Pinion housing O-ring * Ford pinion nut
( 2 )
$62.99
—
$74.99
Our Summit Racing™ pinion supports are CNC-machined from forged 7075 T6 aluminum and then finished with a durable black anodizing. The aluminum construction removes weight from your differential and will accept 28-spline pinions.
( 5 )
$104.99
PEM Racing introduces its new cast Daytona pinion supports for Ford 9 in. axle applications. They have a larger inner bearing and race, along with improved oil flow to the bearings. This allows for higher torque, horsepower, and longer bearing life. These pinion supports are machined from 30,000 psi gray cast iron and weigh 6 lbs. each. They meet or exceed OE quality standards.
Not Yet Reviewed
$82.99
These Strange Daytona pinion supports use larger pinion bearings and oil porting to provide an increase in strength over stock pinion supports. They are ideal for oval track and street/strip applications.
( 6 )
$114.99
These Strange Engineering aluminum pinion supports are completely CNC-machined from Strange Engineering designed forgings. They are an economical solution to replacing failure-prone stock supports. These supports are designed for drag racing only and are not suitable for continuous use.
( 6 )
$149.99
—
$164.99
Strange pinion support O-rings are available for OEM and many aftermarket Ford 9 in. pinion supports. They also offer O-rings specifically for their Ultra Case and Billet Case pinion supports. These rubber O-rings are the perfect replacements when servicing your pinion support; whether it came from Strange Engineering or another manufacturer.
( 1 )
$3.99
For Daytona-style pinion bearings, Moser offers you superior cast iron Daytona pinion supports. Your Circle Track or street machine setup will be stronger with the benefits of these nodular iron supports. Moser pinion supports supply increased strength to house and retain your pinion bearings. Give your racer the extra strength to go all the way.
Not Yet Reviewed
$135.00
Motive Gear Daytona style pinion supports use larger pinion bearings to provide an increase in strength over stock pinion supports. They're required for use with Motive Gear's AX series ring and pinions.
Not Yet Reviewed
$106.99
Upgrade your rear-end with these Yukon Gear & Axle pinion supports. When you start adding horsepower and drive line upgrades, you need to upgrade your pinion support to withstand the extra abuse. These aluminum Yukon Gear & Axle pinion supports are far superior to your stock support, making them an ideal solution for both street performance and track cars alike. Yukon Axle & Gear offers these pinion supports for a variety of different mounting options, bearing types, and materials to make finding the right one for your ride easy.
Not Yet Reviewed
$173.99
—
$241.99
Yukon Gear & Axle pinion support fasteners are machined from steel with a protective black oxide finish and are available in a variety of lengths and thread sizes for axle applications for vehicles from the 1950s and up. Yukon Gear & Axle manufactures a full line of top-quality small parts to help you complete any job—including pinion support fasteners, nuts and washers, ring gear bolts, crush sleeves, axle studs, thrust washers, and much more.
Not Yet Reviewed
$9.99
Ford Performance Parts pinion bearing retainers are available in cast iron or high-strength aluminum for long-lasting durability. These pinion bearing retainers are direct fit and functional replacements for your worn or damaged originals. They're designed for heavy-duty applications to help keep your vehicle going strong--so you can get the most out of your ride. Each pinion bearing retainer comes with a large rear cup and/or a small front cup to best suit your application.
( 2 )
$126.99
Moser Engineering Ford 9 in. third member assemblies are designed to help you get that horsepower to the ground. They include your choice of an aluminum, nodular iron, or stock center section, as well as a differential, an axle spline, a U-joint style yoke, pinion support, and gear ratio. Whether you're assembling a daily driver, street rod, or race car, these Moser third member assembly packages will provide the durability that your vehicle deserves.
( 11 )
$1,930.00
If you're rebuilding your Ford 9 in. rear end, you're going to need Moser Engineering pinion support O-rings. These Ford pinion housing seals get installed in between the carrier housing and the pinion retainer on OEM and most aftermarket Ford 9 in. rear ends. They're #248 O-rings made of durable rubber to ensure a proper seal against leaks. Specifications: 5.012 in. O.D. x 4.734 in. I.D. x 0.139 in. cross section
( 1 )
$3.00
PEM Racing offers differential pinion support shims for applications such as Ford 9 in. axles. The 5-bolt shims are machined from steel and come in a package of six sizes: .010, .012, .014, .016, .018, and .020 in.
Not Yet Reviewed
$21.99
Moser Engineering provides industry-leading components to make upgrades to your vehicle, including these differential pinion support shims. They install between the pinion support and center section for pinion depth adjustments. Precision-machined from steel, the shims are tailored for each individual application to ensure the correct spacing adjustment for your setup.
Not Yet Reviewed
$45.00
Make sure that you have everything you need to complete your ring and pinion gear installation. These differential setup kits from Moser Engineering are available for fitment with a variety of axles. Match up your specs, and order the all-inclusive package to service your vehicle. Moser differential setup kits feature: * Pinion and carrier bearings * Shims * Pinion collar * Pinion seal * Pinion nut * Cover gasket * Ring gear bolts * Marking compound
( 16 )
$150.00
A perfect match for your Strange Engineering pinion supports, Strange offers Timken pinion bearings. They are high-quality units that will make the most of your Strange setup.
( 12 )
$34.99
—
$117.99
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 283 )
$182.99
—
$736.99
Clearance
Nitro Gear and Axle ring and pinion gear sets are manufactured from 8620 steel gear forgings, with a specialized process making them the toughest, quietest gears on- or off-road. By using better materials, better CNC precision-machining, and better lapping/heat-treating processes, they can ensure excellent contact patterns, plus a strong, long-lasting setup. Each new product is subjected to multi-point inspections and then actually installed and set up by Nitro's own in-house differential experts to assure excellent fitment and easy setup. Order the Nitro Gear and Axle ring and pinion set recommended for your application.
( 1 )
$402.00
$299.50
PEM Racing offers pinion bearing spacer kits for a variety of applications, such as Ford 9 in. axles. They replace the crush sleeve in a differential, offering a more precise and reliable way to control pinion bearing preload. Each spacer is a solid piece of machined steel that, unlike a crush sleeve, allows for precise adjustments using shims—ensuring the correct preload and potentially reducing the need for re-tightening the pinion nut. Kits are available with or without shims for Daytona pinion supports.
Not Yet Reviewed
$17.99
—
$22.99
Richmond Gear Pro Gear ring and pinion sets take it a step further. The gear sets are designed for race use only where hard launches and severe heat cycling occurs. They're made from a softer, more malleable 9310 steel alloy to be more resistant to breakage under harsh racing conditions. These gears feature an outstanding rotating weight loss of up to 6 pounds, ground pinion threads for trouble-free installation, and a special heat treatment for improved strength.
( 43 )
$568.01
—
$907.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
