Availability
Showing In Stock Items. Show All 82 Items.
On Sale
For Jeep lovers who wish to upgrade their axles, Spicer Drivetrain Products Ultimate Dana 44 crate axle assemblies will give you increased durability and strength, on and off the trail. You can be assured of quality and performance when you rely on an industry leader like Spicer Drivetrain. Features: * Axle tubing 5/16 in. thick * Nickel chromoly steel axle shafts * Steel brackets 1/4 in. thick * 1350 axle shaft U-joints * Nodular iron differential cover
( 1 )
$5,169.99
$4,704.69
On Sale
Built to exceed your expectations, Auburn Gear provides a variety of Grip-N-Loc differentials to match most makes and models. They build upon exclusive technologies previously found in their limited slip line—but with more robust construction and materials to satisfy the extreme demands of serious drivers. If you push the limits of performance and traction, perhaps through competition, or simply through extreme weather driving, Auburn Gear Grip-N-Loc differentials offer the best options to fit your application! More product features include: * Upgrades your vehicle for the safe transfer of increased power/torque across the axle * Case material is up to 50 percent stronger than OE cases * Advanced cone clutch technology provides a 25 percent increase in bias ratio/increased traction * Hardened-steel gear materials for confidence in extreme conditions * 2-year warranty
( 19 )
$514.99
—
$932.99
$463.49
—
$839.69
On Sale
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,129.99
—
$1,802.99
$1,016.99
—
$1,622.69
On Sale
Extra beef for your rock crawler—Longfield axle shaft and Birfield joint kits put the brawn back into your fun. Stock axles and joints just don't have the strength to deal with larger tires and additional horsepower. Longfield kits furnish you with robust 100 percent chromoly components that are critical for you to "make the grade." So, go where you want, run any trail, and adventure with confidence—knowing your rig's equipped with Longfield axle shaft and Birfield joint kits. Order model designed for your vehicle and axle application.
( 7 )
$604.16
—
$1,154.85
$513.54
—
$981.62
On Sale
B&M differential covers are strong and cool! Cast and machined from premium aluminum alloy, they feature heavy-duty structural cooling fins, a larger fluid capacity, and high-strength magnetic drain plugs that aid in catching ferrous metal particles. B&M differential covers add some strength with extra cooling ability to your rear end.
( 151 )
$293.65
—
$532.95
$219.95
—
$478.95
On Sale
How many degrees of twist will your stock axles handle? Longfield axle shafts beef up your machine's rear with strong chromoly that can handle 120 degrees of twist. Big tires and low crawler gears can and do lead to broken axles. Upgrade your drivetrain with Longfield rear axle shafts. Order the model designed for your vehicle application.
( 6 )
$196.71
—
$494.11
$167.20
—
$419.99
On Sale
Longfield birfield joints are super strong to furnish your rig with a better performance option. They're built from 100 percent chromoly--the housings are forged from 4340 and the internals are 4340, as well, but also heat-treated. The joints are polished with precision to remove any imperfections that may cause stress risers. Beef up your Toyota for climbing with Longfield birfield joints.
( 4 )
$328.92
—
$350.66
$279.58
—
$298.06
On Sale
Mr. Gasket's chrome differential covers are the perfect addition to your axle. They're made of heavy-gauge steel for durability and excellent gasket sealing. The covers all get a high-luster chrome finish and include a gasket and mounting bolts.
( 14 )
$75.65
—
$87.15
$47.93
—
$74.85
On Sale
Beef up your rear-end with Trail-Gear Rock Assault rear axle housings. Better trail performance comes in the shape of fabricated, thick steel center sections and differential mounting surfaces, heavy-duty DOM axle tubes, and 4130 chromoly flanges. Plus, Trail-Gear engages the tubes further into the center section, with a 360 degree gusset welded around the tubes on the inside of the housing, to ensure that your rig is strong enough to go wherever you want! Rock Assault's overall design also offers additional clearance under the axle tubing and differential, providing more height to climb over those big boulders. Outfit your rig to be extremely tough with the rugged, high-clearance design of Trail-Gear Rock Assault rear axle housings.
( 1 )
$1,199.99
—
$1,499.99
$1,019.99
—
$1,274.99
On Sale
Trail-Gear Creeper flanges offer more trail strength than your factory drive flanges. They are manufactured from hardened 4340 chromoly tool steel and feature a larger center section with more support for the splines. The kits include flanges, dust covers, cover O-rings for a waterproof seal, a drill bit, and heavy-duty studs. The additional studs share the load, preventing hub stud and bolt failures common to stock drive flanges and hubs. Get your rig trail-ready with Creeper flanges from Trail-Gear.
( 2 )
$179.99
$152.99
On Sale
Trail-Gear Creeper Breather bellows prevent dirt, debris, and water from getting into your axle through the stock axle housing breather. They expand and contract to accommodate the increase or decrease in housing pressure. These TG replacements are made from flexible EVA copolymer plastic, just like the originals, and will fit onto 1/4 in. O.D. tube or barbed fitting (not included).
( 1 )
$16.99
$14.44
On Sale
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 98 )
$188.99
$170.09
On Sale
There's nothing quite like blazin' the trails! However, if you've ever experienced breaking your manual locking hubs, don't fret—Trail-Gear offers a great fix to nix that problem with their axle drive flange kits. These components are the perfect replacement for your existing 35-spline internal locking hubs or Warn 35-spline manual locking hubs, so you can return to the fun-filled action! Trail-Gear axle drive flange kits include: * Drive flange pucks (4340 chromoly coated with black oxide) * Drive flange covers (billet aluminum and anodized black with Trail-Gear logo) * Rubber O-rings * Hardened snap rings
( 4 )
$59.99
—
$399.99
$50.99
—
$339.99
On Sale
Trail-Gear creeper breathers are designed to prevent dirt, debris, and water from getting into your axle through the stock axle housing breather. They will expand and contract to accommodate an increase or decrease in housing pressure. TG breather kits include one housing fitting, clamp, and bellow. Installation takes just a few minutes, with no hoses to route.
( 10 )
$39.99
$33.99
On Sale
Unleash the performance in your vehicle with Spicer Drivetrain Products ring and pinion gears! They're engineered to meet the specific original equipment standards of Dana axles, delivering a perfect fit with less noise, vibration, and harshness. All Spicer ring and pinions are built to the latest Dana designs—which include premium heat-treat processes and optimal tooth profiles, plus high-grade steel to achieve maximum durability. Even in the most demanding conditions, Spicer ring and pinion gears provide quality and unparalleled performance to genuine Dana axles. Order the set designed for your specific axle model application.
( 13 )
$354.99
—
$428.99
$319.49
—
$386.09
On Sale
Trail-Gear Creeper axle ball gussets beef up your knuckle balls. Big tires, bumpy terrain, and aggressive driving can take their toll. TG Creeper gusset kits reinforce the knuckle balls to prevent the outer knuckle ends from bending and damaging your solid axle. Kits include unpainted upper gussets with holes for mounting shocks, lower gussets, and steering stop gussets. Knuckle down, not under, to the pressures of rocky trails with the added support and strength of Trail-Gear Creeper axle ball gussets.
( 1 )
$99.99
$84.99
On Sale
Low Range Off-Road differential master rebuild kits include everything you need to make your gear setup a breeze. The ring and pinion gear installation kits contain necessary components, such as trail, head, and carrier bearings; shims, seals, crush sleeves, pinion nuts, and more (depending on kit). Low Range rebuild kits are available for a variety of vehicle and axle model applications.
Not Yet Reviewed
$182.51
$155.13
On Sale
Trail-Gear locking hubs are true replacements. These genuine, factory-new locking hubs are available for several applications. They typically include hub gasket, with some also including cover hardware.
Not Yet Reviewed
$149.99
—
$199.99
$127.49
—
$169.99
On Sale
Auburn Gear pinion shaft service kits supply you with a new steel crosspin shaft and bolt. Maintain the performance of your Auburn Gear differentials with the correct service kits that offer the proper fit and function for your application.
( 3 )
$38.99
—
$166.99
$35.09
—
$150.29
On Sale
Trail-Gear triple drilled flanges include all of the common bolt patterns in one unit, making them universal output flanges! That includes 4-cylinder CV and non-CV patterns, as well as the V6 CV pattern. This makes sourcing and reversing your drivelines much easier. These flanges fit most gear-driven transfer cases. Order the model recommended for your axle application.
( 2 )
$59.99
—
$129.99
$50.99
—
$110.49
On Sale
Trail-Gear solid pinion spacers prevent loosening of the gear setup preload. Originally designed for older Toyota applications, Toyota stopped using them decades ago. Solid spacer and shims replace the crush sleeve. It takes a little longer to set up, but you won't have to keep re-torquing the pinion nut down the road. These kits are available for 4-cylinder trucks, as well as V6 and high-pinion applications.
( 1 )
$39.99
$33.99
On Sale
Years after releasing their successful Rock Assault 9 axle housing, Trail-Gear decided to add a Toyota 8 in. version to the Rock Assault lineup. This housing is built to the same specifications as the Rock Assault 9 axles; however, they're built to accept the popular Toyota 8 in. differential. These housings have been tested in W.E. Rock, CalRocs, and King of the Hammers—so you know they'll stand up to the toughest terrain on earth. Trail-Gear started with a 1/4 in. thick formed shell for the center section made from A36 steel. This is a high-strength, low alloy, structural steel plate with a minimum yield strength of 36,000 psi. All of this is attached to an equally strong 1/2 in. thick faceplate for anchoring the DOM axle tubes. The axle tubes are secured by the industry's first 3-Point Attachment System, giving the tubes superior support and engagement into the center section. Trail-Gear also faces the center section to ensure your differential mounts flush against the axle housing to prevent any leaks. Rock Assault Fabricated 8 Housings are offered with 3.5 in. O.D. axle tubes with your choice of 1/4 in. or 3/8 in. wall thickness. NOTE: The housing is shipped with no ends. Housing ends must be sourced and installed to complete axle. Portal style ends are commonly used for this application.
Not Yet Reviewed
$1,199.99
—
$1,499.99
$1,019.99
—
$1,274.99
On Sale
Everyone has different needs for their truck. One of the most dramatic changes you can make to a vehicle are the rear ring and pinion gears. Whether you are going for aggressive low-end response for performance and towing, looking to make your truck a highway cruiser, or you've made a change to your wheel and tire size, Hurst ring and pinion sets are available to assist with the transformation. They offer gear sets ranging from 3.08 to 4.56 for the GM 12-bolt rear ends to get you exactly where you need to be. Hurst sets feature high-grade steel for strength and durability along with a gear tooth finish that reduces friction and heat for longevity.
Not Yet Reviewed
$332.95
$183.95
On Sale
In and out of the water? Trail-Gear axle housing breathers feature an internal spring-loaded flapper valve that prevents water from entering through the breather during your water crossings. These TG models are stock replacements for old, rusted, or damaged units.
( 2 )
$19.99
$16.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
