Availability
Clearance
Built to exceed your expectations, Auburn Gear provides a variety of Grip-N-Loc differentials to match most makes and models. They build upon exclusive technologies previously found in their limited slip line—but with more robust construction and materials to satisfy the extreme demands of serious drivers. If you push the limits of performance and traction, perhaps through competition, or simply through extreme weather driving, Auburn Gear Grip-N-Loc differentials offer the best options to fit your application! More product features include: * Upgrades your vehicle for the safe transfer of increased power/torque across the axle * Case material is up to 50 percent stronger than OE cases * Advanced cone clutch technology provides a 25 percent increase in bias ratio/increased traction * Hardened-steel gear materials for confidence in extreme conditions * 2-year warranty
( 19 )
$649.99
—
$1,002.99
$370.50
—
$513.50
Clearance
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,138.99
—
$1,802.99
$787.50
—
$1,120.50
Clearance
Spicer Drivetrain Products front axle shafts feature an increased U-joint size that provides 25 percent higher yield strength than original U-joints. They offer unparalleled strength and longer life—the outer stub is re-engineered for added strength; improved snap ring retention reduces shock load failures; and material has been removed from the body and added to the yoke ears (to equalize deflection through the yoke and reduce bearing cap spinning). The axles are made from durable steel, with a micro-alloy improving their strength and a statistically controlled heat treatment ensuring proper hardness. Order the replacement model designed for your vehicle application.
( 129 )
$232.99
—
$691.99
$129.50
—
$389.50
Clearance
Yukon Gear & Axle Trac Loc positraction internals will help you get your truck back on the road and working the way it is supposed to. After years and miles of use and abuse, your posi differential is going to need to a rebuild in order to operate efficiently. Yukon offers these inclusive kits for the maintenance overhaul. To ensure a top-notch gear set that will last longer than stock, Yukon utilizes better materials and manufacturing techniques than original specifications. Your truck is too big of an investment to neglect or to service with poor-quality parts. Order Trac Loc positraction internals from the experts at Yukon Gear & Axle.
( 6 )
$355.99
—
$495.99
$192.50
—
$235.50
Clearance
Unleash the performance in your vehicle with Spicer Drivetrain Products ring and pinion gears! They're engineered to meet the specific original equipment standards of Dana axles, delivering a perfect fit with less noise, vibration, and harshness. All Spicer ring and pinions are built to the latest Dana designs—which include premium heat-treat processes and optimal tooth profiles, plus high-grade steel to achieve maximum durability. Even in the most demanding conditions, Spicer ring and pinion gears provide quality and unparalleled performance to genuine Dana axles. Order the set designed for your specific axle model application.
( 13 )
$350.99
—
$817.99
$141.50
—
$294.50
Clearance
USA Standard Gear ring and pinion sets are high-quality and precision-machined replacements. They're offered for a wide variety of common and hard-to-find applications, differential case designs, and ratios. The right choice adds confidence to your install; select the USA Standard ring and pinion set recommended for your vehicle.
( 49 )
$243.99
—
$471.99
$187.50
—
$292.50
Clearance
These Strange differential carrier bearings are designed to fit the Strange carriers.
( 15 )
$44.99
—
$139.99
$29.50
—
$135.50
Clearance
USA Standard Gear master overhaul kits have everything you need to properly rebuild the differential in your vehicle. They let you finish your ring and pinion gear installation or axle rebuild with confidence. These install kits offer a lower price alternative when costs must be kept down. Most USA Standard Gear master overhaul kits include: * Pinion bearings and races * Pinion shims * Carrier bearings and races * Carrier shims * Crush sleeve (if applicable) * Slingers (where used) * Pinion seal and nut * Ring gear bolts * Cover gasket or gasket maker (RTV) * Marking compound with brush * Thread locker
( 31 )
$367.99
—
$446.99
$231.50
—
$264.50
Clearance
Yukon Gear & Axle differential carrier cases offer the strength and quality you demand for your ride. Available for many axles and ratios, these cases are constructed from first-rate materials to strict standards, ensuring durable, reliable performance.
( 21 )
$270.99
—
$600.99
$149.50
—
$294.50
Clearance
USA Standard Gear spider gear sets offer OEM-quality at a low price. They're available in dozens of configurations for applications from 1955 and up. Depending on the kit you choose, your selection may include all or a combination of side gears, pinion gears, spider gear thrust washers, cross pin shaft, cross pin bolt, and/or roll pin. Restore the performance of your differential with the quality of a USA Standard spider gear set.
( 16 )
$205.99
—
$329.99
$105.50
—
$180.50
Clearance
Nitro Gear and Axle ring and pinion gear sets are manufactured from 8620 steel gear forgings, with a specialized process making them the toughest, quietest gears on- or off-road. By using better materials, better CNC precision-machining, and better lapping/heat-treating processes, they can ensure excellent contact patterns, plus a strong, long-lasting setup. Each new product is subjected to multi-point inspections and then actually installed and set up by Nitro's own in-house differential experts to assure excellent fitment and easy setup. Order the Nitro Gear and Axle ring and pinion set recommended for your application.
( 1 )
$240.00
—
$449.99
$179.50
—
$314.50
Clearance
GSP new CV axle assemblies are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration-free performance in all driving conditions. All axles are thoroughly inspected for quality and workmanship. Additional attributes of GSP new CV axle assemblies include: * Since boot failure is the main cause of CV axle failure, GSP axles use only premium-grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity * Assembled with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
( 85 )
$71.99
—
$186.99
$34.50
—
$120.50
Clearance
Nitro Gear and Axle Pro Gear ring and pinion gear sets are manufactured from 9310 forgings for maximum strength in competition/race vehicles. They are not intended for daily use as they have a shorter life span relating to their wear characteristics. The cut on these gears is engineered for maximum strength, often resulting in significant noise compared to traditional gear sets. Further enhancements and specialty parts may be required. Order the Nitro Gear and Axle Pro Gear ring and pinion set recommended for your competition/racing application.
Not Yet Reviewed
$1,449.99
$999.50
Clearance
Spicer Drivetrain Products axle shafts are manufactured to the same high standards as factory parts because they are original equipment. That means when an automotive axle is replaced with a genuine Spicer part, you're getting the same performance and reliability as when the vehicle rolled off the assembly line. Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products—so the replacement axle shaft you purchase today may even exceed the standards set for the original equipment part you're replacing. Order the model designed to fit your application.
( 89 )
$121.99
—
$554.99
$81.50
—
$203.50
Clearance
Yukon Gear & Axle ring and pinion sets are strong but quiet performers. Designed to handle some of the harshest conditions, these sets utilize the latest design and manufacturing technologies to afford you a smooth running gear that's durable and easy to set up. Yukon ring and pinions are available in hundreds of size, ratio, and axle model options. Whether you're on the street, off-road, or at the track, you'll experience unrivaled power and gear performance. Order the model recommended for your application.
( 172 )
$314.99
—
$1,600.99
$224.50
—
$1,339.50
Clearance
Yukon Gear & Axle Dura Grip positraction carriers offer great traction and strength, and yet are not overly aggressive for the streets. These nodular iron or steel replacements are 4-spring, Raybestos composite, clutch-style, limited-slip carriers—with internal gears machined from forged 4320 steel with stronger teeth. Assembled in the USA, the Yukon differential carriers are rebuildable, allowing for repairs or modifications without buying a new unit. They're available for fitment with nearly two dozen axle models. What are you using to transfer power? Choose smooth operation with strong lockup abilities to transfer torque—benchmarks of the Yukon Gear & Axle Dura Grip positraction carriers.
( 136 )
$721.00
$402.50
Clearance
Yukon Gear & Axle spider gear kits offer better performance for your differential. Utilizing high-quality materials and better-than-OE design, Yukon spider gears get you through turns with the traction that you need. The kits are available in a variety of carrier styles and are compatible with dozens of axle models, front and rear. Improve your differential with the addition of a Yukon Gear & Axle spider gear kit.
( 69 )
$247.99
—
$270.99
$170.50
—
$209.50
Clearance
Motive Gear ring and pinion gear installation kits include high-quality components to complete your project. Depending on the axle application, the kits can include: a cover gasket, pinion shims, carrier shims, crush sleeve, pinion seal and nut, and ring gear bolts. Some kits also come with marking compound and a brush. To ensure proper fitment, order the installation kit designed for your specific axle model.
( 48 )
$48.99
—
$273.99
$20.50
—
$152.50
Clearance
Yukon Gear & Axle offers differential carriers for a wide range of applications. Yukon uses top-quality materials and the latest manufacturing technologies to produce strong, durable carriers that you can depend on for proper traction. These aftermarket units are available in a variety of styles—such as limited-slip, open, Traction-Lok, and locker—for fitment on dozens of axle models and vehicle apps.
( 13 )
$246.99
$203.50
Clearance
Yukon Gear and Axle offers an extensive line of general replacement and high performance differential and axle combo kits for passenger car, SUV, and truck applications. High-quality alloys and the latest in heat-treating technologies provide strong components for on and off-road or at the track. Step up to the quality of Yukon parts produced in conjunction with world leaders in automotive manufacturing techniques and equipment.
( 3 )
$775.99
$459.50
Clearance
Keep your FWD/AWD front axles perfectly aligned with ACDelco replacement axle housings. Cracked or warped housings can lead to excessive transmission or wheel bearing wear, as well as damage the axle splines. Order the model recommended for your application.
( 1 )
$304.99
$214.50
Clearance
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 318 )
$638.99
$318.50
Clearance
ACDelco GM Genuine Parts intermediate axle shafts are manufactured to be an exact replacement for your vehicle. Genuine OE parts are recommended in order to deliver peace of mind that the fit, form, and function is of the highest standards. Get the factory-style components you need from the same source as General Motors with ACDelco. Order the intermediate axle shaft model designed for your GM vehicle application.
( 1 )
$187.99
$122.50
Clearance
Ratech has just what you need for the fast installation of your ring and pinion gears and to keep you on budget. Get the key components to get the job done with Ratech ring and pinion installation kits.
( 192 )
$94.99
—
$162.99
$65.50
—
$117.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
