Availability
Showing In Stock Items. Show All 88 Items.
Yukon Gear & Axle Dana 30 disconnect block-off plates are needed when you want to remove your troublesome 4WD disconnect and convert to one-piece axles. These plates are designed to cover the hole in your axle housing left when you remove the vacuum motor. Yukon Gear & Axle Dana 30 disconnect block-off plate kits include: * Block-off plate * Block-off plate gasket * Inner axle seals
( 2 )
$43.99
Low Range Off-Road front axle truss with gusset kits get your axles off-road ready. A weak point on some vehicles is the front axle, which can be susceptible to bending or warping causing misalignment, tire wear, and premature failure of front axle components. For any off-road usage, Low Range Off-Road recommends trussing your axle with their truss and gusset kits. They are a must for anyone planning to do a spring over axle swap or aftermarket suspension and tire upgrades. The truss is notched in the center of the gusset to accommodate the factory weld on the axle. Contents and additional features: * One upper truss * Two lower knuckle ball gussets * Easy stitch weld installation * Ships raw * Available with or without Low Range "LR" logo
Not Yet Reviewed
$42.50
In late 1980s to mid 90s, Jeep used a vacuum actuator to shift the transfer case and corresponding front axles in and out of 2WD, and high or low 4WD. Crown Automotive 4WD front axle actuators will replace faulty vacuum switches to improve your vehicle's get-up-and-go, no matter the terrain.
( 8 )
$33.99
—
$40.99
Clearance
ATP front axle disconnect assemblies save you time and money! Original gearbox units are prone to failure, and the time you spend searching for new or remanufactured units will be wasted, as complete assemblies are no longer available from the dealer. ATP front axle disconnect assemblies are all newly manufactured and thoroughly pre-lubricated with an excellent anti-wear and extreme-pressure performance grease. You could buy internal replacement parts and a housing—if available—at a big price, and then spend more of your time rebuilding, but why? ATP front axle disconnect assemblies eliminate the need for rebuilding and offer superior mechanical stability. If you repair 4x4 vehicles, you'll eventually need one of these ATP axle actuator assemblies. They're available in configurations for a variety of applications.
( 2 )
$116.99
$38.50
Clearance
Alloy USA chromoly front axle shaft kits use high-tensile strength 4340 chromoly that is heat-treated twice, making them up to 30 percent stronger than stock. Keep your truck going on the trail, rocks, or mud with Alloy USA front axles.
( 4 )
$99.99
$49.50
Time, rust, and sharp or heavy objects take their toll on diff covers. Spicer Drivetrain Products genuine OE differential covers are manufactured to original standards so they fit just right every time. These steel covers include the filler plug and hardware so you can bolt them right up. Choose the cover model needed for your particular axle size.
( 6 )
$45.99
—
$49.99
Crown Automotive axle locker sensors ensure that the axle locks are fully engaged for proper operation. When front or rear axles are locked, both wheels move at the same speed with the same amount of force—for improved handling in slippery or off-road driving conditions. These replacement sensors are crafted from original materials and specs for proper fit and performance. They're used on many Jeep applications with Tru-Lock differentials from the early 2000s and up.
( 1 )
$50.99
Yukon Gear & Axle offers a full line of differential covers to suit your front or rear applications. These replacement covers protect your gears, keep lubricating fluid where it's needed—and on some styles, they offer added cooling and/or strength. Their large selection affords you options of materials, sizes, and finishes to get exactly what you need. Order the model recommended for your axle, differential case design, and engine specifications.
( 66 )
$39.99
—
$52.99
Clearance
When it comes time to replace your worn-out or failed 4WD differential actuator, look no further than Dorman. These replacement front axle actuators are available in the original vacuum or electric-style, just like OEM. Trust Dorman for the trouble-free engagement of your 4WD system.
( 51 )
$32.99
—
$42.95
All Balls Racing differential seal kits are available for a wide variety of ATV applications—hands-down the most complete line on the market! Each kit consists of the necessary seals to help repair oil leaks, front or rear. Order the model recommended for your machine.
Not Yet Reviewed
$21.87
—
$51.09
When you need parts and components for your American V-Twin, HardDrive can deliver. They offer front and rear axles for a long list of Harley® motorcycles. The steel axles feature a chrome plated finish and will include hardware, as well as spacers where noted. Select the front and/or rear axle designed for your motorcycle.
Not Yet Reviewed
$45.86
—
$49.46
Take your high performance axle and add some visual attitude with these Summit Racing™ chrome differential covers. They're stamped from heavy-gauge steel to ward off those pesky oil leaks, and chrome plated for long lasting good looks. The covers include a new gasket and bolts for an easy installation.
( 271 )
$40.99
Cardone products are the highest-quality new manufactured parts in the aftermarket. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their manufacturing processes can only be found behind the Cardone name. For the past 40 years, Cardone's innovative manufacturing processes have provided a high-quality, lower-cost alternative to replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot—Cardone is your one source for replacement hard parts. Additional features of Cardone new CV drive axles: * The most advanced engineering and manufacturing processes to provide you with high-technology replacement parts * Neoprene boots resist ozone, eliminating cracking, a leading cause of CV boot failure * 3 percent moly grease provides excellent high-temperature and pressure characteristics, extending the life of the joint * All axles are supplied with a new axle nut, replacing the worn or damaged existing axle nut * Rolled axle splines guarantee the proper installation of the axle into the hub and transmission * Rolled threads guarantee the proper installation of the axle nut Order the replacement model designed for your vehicle application.
( 218 )
$30.50
—
$49.50
DRP Performance ultra low drag hub seals are premium quality, full-PTFE lip seals. They offer less than 1 in.-lb. of resistance per seal. The lightweight aluminum house provides a true seal to prevent debris from getting to the hub bearings. Seals increase hub free spin and reduce drag and rotating weight. Reusable when removed properly. Order the size designed for your application.
Not Yet Reviewed
$23.85
—
$26.85
Yukon Gear & Axle king pin replacement components range from knuckle bushings and spring pin caps, to seals, bearings, hardware and more. All of Yukon's parts and accessories are quality-tested and engineered for maximum durability and reliability for street and off-road applications. Order the model recommended to service your king pin.
( 4 )
$23.99
Clearance
GSP new CV axle assemblies are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration-free performance in all driving conditions. All axles are thoroughly inspected for quality and workmanship. Additional attributes of GSP new CV axle assemblies include: * Since boot failure is the main cause of CV axle failure, GSP axles use only premium-grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity * Assembled with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
( 87 )
$71.99
—
$103.99
$34.50
—
$47.50
Summit Bucks
Bearings from a name you can trust! When changing your ring and pinion set, don't forget ACDelco carrier bearings. Made of premium materials, these bearings are available for a variety of applications. Order the replacement size recommended for your differential.
Not Yet Reviewed
$40.99
On Sale
Auburn Gear Select-A-Loc clutch kits service your differential for renewed performance. You'll receive friction discs and steel plates that will fit and function properly in your Select-A-Loc. Keep both wheels turning with Auburn Gear replacement differential clutch kits.
Not Yet Reviewed
$38.99
$35.09
Alloy USA 4WD actuator forks are designed to work with the posi lock differential cable lock kit. They are manufactured from durable materials and are built to factory specifications for a direct fit.
( 1 )
$53.99
Yukon Gear & Axle minimum install kits are perfect when you just need the basics. They're a low-cost solution for gear changes in newer vehicles where the bearings can be reused. Available for a wide variety of applications, the kits come with high-quality components to ensure a smooth setup. Yukon minimum install kits include: * Pinion seal * Crush sleeve (where applicable) * Complete shim kit * Gear marking compound and brush * Pinion nut, O-ring, baffles, slinger (varies by application) * Extensive instruction manual
( 11 )
$28.99
—
$48.99
Crown Automotive pinion shim sets are needed when installing your gears. You'll use them to rotate the axle and line up the driveshaft. These steel shim sets are direct OE replacement parts built to the original specifications. Utilize Crown parts to precisely set your axle up for optimum performance.
( 2 )
$28.99
—
$38.99
Certain high numeric ratio gear sets require special notched crosspins for proper installation. These Yukon Gear & Axle crosspins and shafts are made for some of the Yukon-designed ring and pinion sets that need aftermarket crosspins and shafts to work with their parts. The differential components are available for more than two dozen axle models, so match your vehicle to the proper direct-fit replacement. They're manufactured from hardened steel or chromoly for maximum durability.
( 10 )
$21.99
—
$53.99
Clearance
Whether you're switching gear ratios or replacing older ring and pinions with worn or chipped teeth, your vehicle will need new Crown Automotive pinion bearings. They're designed and built to OEM specs for easy fitment and reliable service on stock axles. Always remember to order new bearing cups, as well, unless they're included as part of your kit. These pinion bearings are available for a wide range of specific vehicles. When replacing the ring and pinion, choose Crown Automotive pinion bearings for the right fit every time.
Not Yet Reviewed
$20.99
—
$55.99
Clearance
Motive Gear ring and pinion gear installation kits include high-quality components to complete your project. Depending on the axle application, the kits can include: a cover gasket, pinion shims, carrier shims, crush sleeve, pinion seal and nut, and ring gear bolts. Some kits also come with marking compound and a brush. To ensure proper fitment, order the installation kit designed for your specific axle model.
( 48 )
$50.99
$20.50
—
$63.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
