Availability
Showing In Stock Items. Show All 71 Items.
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 492 )
$727.99
Built to exceed your expectations, Auburn Gear provides a variety of Grip-N-Loc differentials to match most makes and models. They build upon exclusive technologies previously found in their limited slip line—but with more robust construction and materials to satisfy the extreme demands of serious drivers. If you push the limits of performance and traction, perhaps through competition, or simply through extreme weather driving, Auburn Gear Grip-N-Loc differentials offer the best options to fit your application! More product features include: * Upgrades your vehicle for the safe transfer of increased power/torque across the axle * Case material is up to 50 percent stronger than OE cases * Advanced cone clutch technology provides a 25 percent increase in bias ratio/increased traction * Hardened-steel gear materials for confidence in extreme conditions * 2-year warranty
( 19 )
$869.99
We all respond to pressure in different ways. Dorman differential vents equalize the atmospheric pressure in your vehicle's differentials. Vents deteriorate over time and can often get clogged, requiring replacement. These Dorman vents are constructed from high-quality materials and are manufactured to strict engineering quality standards. Prevent debris from entering and causing fluid contamination, while allowing excess pressures and gases to filter out with Dorman differential vents.
( 8 )
$5.99
—
$9.99
Make sure that the job is done right with Timken differential carrier bearings. You can trust Timken to supply you with bearings manufactured with technology-driven processes to the most stringent of thresholds and manufacturing tolerances. Look to Timken's differential bearings to provide you with the confidence that you need when completing your ring and pinion installations.
( 47 )
$18.99
—
$36.99
Stock CV axles can fall short on durability and performance under demanding conditions, and ReadyLift analysis shows that factory axles often experience premature wear due to increased stress at steeper angles, limiting performance on lifted configurations. ReadyLift Suspension high performance CV axle kits address these issues with axles purpose-built for the lifted truck life, offering more strength and reliability at an affordable price. But whether your truck is moderately leveled or lifted to the extreme, you can rest assured these ReadyLift CV axle kits are up to the challenge. Elevate your vehicle's performance with ReadyLift CV axle kits. Features and benefits: * Enhanced shaft strength: -- Increased diameter for better resistance to twisting and bending under heavy-load conditions, especially during off-road driving * Advanced CV joint design: -- Replaces the factory tripodal joint with a true CV axle joint, providing smoother articulation and improved energy transfer, reducing wear even at extreme angles * Premium boots and seals: -- High-quality, TRD-inspired boots, clamps, and dust seals keep out dirt and moisture, extending the axle's life and reliability in rugged environments
Not Yet Reviewed
$479.95
Do you have a twisted or broken axle? Dorman offers roughly 100 replacement axle shaft kits to remedy the problem. They're available in various styles, as well as dozens of precise lengths and spline counts for direct fitment on any corner of your vehicle. Dorman axles include components manufactured from quality materials—designed to install in the stock location without any modifications. Get your vehicle rolling again with dependable Dorman axle shaft kits.
( 151 )
$381.95
—
$718.99
USA Standard Gear ring and pinion sets are high-quality and precision-machined replacements. They're offered for a wide variety of common and hard-to-find applications, differential case designs, and ratios. The right choice adds confidence to your install; select the USA Standard ring and pinion set recommended for your vehicle.
( 49 )
$291.99
—
$548.99
Motive Gear differential bearing kits contain everything you need to install your ring and pinion. Available for front or rear axles, the kits are offered for nearly three dozen differential case design applications. Includes: * Front and rear pinion bearing * Pinion seal * Carrier bearings * Pilot bearing (depending on application) * Gear marking compound * Crush sleeve * Pinion nut * Brush * Thread locking compound * Cover gasket or RTV
( 25 )
$268.99
—
$281.99
Do you need to install new crush sleeves? Motive Gear offers differential crush sleeves for controlled preload. You can depend on their steel collars to slip in between the bearings and keep the pressure on as you tighten down the pinion nut. If you're replacing a pinion seal or setting up your differential, use Motive Gear crush sleeves for preload control.
( 12 )
$13.99
An old race should never be re-used with a new bearing--no matter how good its condition may appear to the naked eye. Timken pinion bearing races feature premium design, enhanced surface finishes, and are manufactured using quality materials to ensure longer bearing life and excellent antifriction properties. They work as a team with your bearings to keep your gears in motion. Timken bearing races are available as direct-fit OE replacements or for custom applications. Choose pinion bearing races from Timken on your next automotive job. Features include: * Designed to effectively reduce friction * Ultimate load-handling capability * Built for long service life * Meet high performance standards
( 19 )
$11.99
—
$15.99
Powertrax Grip Pro traction systems are the latest design in differential technology. They combine the smooth operation of a limited-slip differential, with the strength of a fully machined, forged steel case. Using 3x2 spiral gear engineering, the Powertrax Grip Pro delivers progressive and variable traction. Based on throttle input, you are in control of how much traction is applied. These differential systems are great for use where finesse is just as important as brutal traction. On the road or track, in the rain or snow, Grip Pro is a winner! The systems come fully assembled and there are no friction plates—so you can use any gear oil you like, including full synthetic and racing lube.
( 21 )
$989.99
—
$997.99
These Powertrax differential spring rebuild kits are designed to keep your locker operating smoothly. They include the necessary springs for installation. The rebuild kits are available for the Lock-Rite and No-Slip carriers.
( 29 )
$13.99
—
$20.99
Timken pinion bearings offer durability and peace of mind. Known the world over, Timken bearings are precision-engineered to provide you with superior quality, along with energy-efficient and cost-effective friction management. For a proper fit that will run smoothly, these single-row tapered roller bearings are your best bet when replacing old and worn pinion bearings. Timken bearings are available for dozens of axle types; choose the models that match your vehicle specs.
( 55 )
$22.99
Yukon Gear & Axle master overhaul kits are what you need for a successful differential rebuilding. All of the high-quality parts that you need are provided to do your job right. Yukon master kits go through extensive research to ensure a perfect fit and hassle-free install utilizing the best components, including Timken bearings and races! Choose from their huge selection of kits to meet your replacement application. Yukon Gear & Axle master overhaul kits may include: * Pinion bearings * Carrier bearings * Pinion seal * Crush sleeve or preload shims * Pinion depth shims * Carrier shims (varies by application) * Gear marking compound and brush * Pinion nut * Baffles and slingers (varies by application) * Gasket and/or silicone * Ring gear bolts (for application) * 20-page instruction manual
( 102 )
$303.99
—
$675.99
Are you setting up a rear-end? These Motive Gear differential carrier shim kits will make the job easier. They come with a variety of shims, so you're sure to find the best fit for your vehicle; plus, they're made of steel for durability. Whether you're installing a new setup or refreshing an old one, you can trust the Motive Gear differential carrier shims designed for your application to make the job a snap.
( 36 )
$23.99
USA Standard Gear master overhaul kits have everything you need to properly rebuild the differential in your vehicle. They let you finish your ring and pinion gear installation or axle rebuild with confidence. These install kits offer a lower price alternative when costs must be kept down. Most USA Standard Gear master overhaul kits include: * Pinion bearings and races * Pinion shims * Carrier bearings and races * Carrier shims * Crush sleeve (if applicable) * Slingers (where used) * Pinion seal and nut * Ring gear bolts * Cover gasket or gasket maker (RTV) * Marking compound with brush * Thread locker
( 30 )
$403.99
—
$663.99
Powertrax Lock-Right and performance lockers' straight-line performance is equal to a solid spool axle, yet they automatically unlock to allow for full differentiation in turns. They also reduce the excessive noise, tire wear, and drivetrain damage associated with other lockers. Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included.
( 145 )
$523.99
—
$546.99
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 283 )
$288.99
—
$645.99
Yukon Gear & Axle ring and pinion sets are strong but quiet performers. Designed to handle some of the harshest conditions, these sets utilize the latest design and manufacturing technologies to afford you a smooth running gear that's durable and easy to set up. Yukon ring and pinions are available in hundreds of size, ratio, and axle model options. Whether you're on the street, off-road, or at the track, you'll experience unrivaled power and gear performance. Order the model recommended for your application.
( 172 )
$284.99
—
$569.99
Yukon Gear & Axle Super carrier shims come in handy when setting up your new ring and pinion or carrier. A variety of steel shims is included in the kits. Order the kit designed for fitment with your axle model—then set just the right amount of play between your gears.
( 58 )
$18.89
—
$108.99
Eaton electronic ELocker differentials offer you the best of both worlds. Imagine having the comfort and convenience of an open differential for around town—and the powerful traction of a full-on locker when it's necessary. This is exactly what the Eaton ELockers provide. With the push of a dash-mounted button, you decide when the differential should be fully locked for maximum traction to both wheels, or free to differentiate for the best fuel mileage and tire tread life. Whether you're running a 2WD or 4WD, open or locked, the Eaton ELockers put the driver in total control! Order the carrier designed for your axle model.
( 12 )
$1,554.99
—
$1,715.99
Cardone products are the highest-quality new manufactured parts in the aftermarket. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their manufacturing processes can only be found behind the Cardone name. For the past 40 years, Cardone's innovative manufacturing processes have provided a high-quality, lower-cost alternative to replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot—Cardone is your one source for replacement hard parts. Additional features of Cardone new CV drive axles: * The most advanced engineering and manufacturing processes to provide you with high-technology replacement parts * Neoprene boots resist ozone, eliminating cracking, a leading cause of CV boot failure * 3 percent moly grease provides excellent high-temperature and pressure characteristics, extending the life of the joint * All axles are supplied with a new axle nut, replacing the worn or damaged existing axle nut * Rolled axle splines guarantee the proper installation of the axle into the hub and transmission * Rolled threads guarantee the proper installation of the axle nut Order the replacement model designed for your vehicle application.
( 215 )
$82.99
On Sale
Summit Racing™ Positraction differential carriers deliver aggressive, yet smooth, controllable traction. Our carriers feature nodular iron cases, forged steel internals, strong teeth—and they're fully rebuildable. We offer fitments for dozens of axle models. Whether replacing or upgrading, Summit Racing™ Positraction differential carriers will put power to the pavement, providing the confidence and performance you need.
( 49 )
$730.99
$657.89
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 317 )
$638.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
