Availability
Showing In Stock Items. Show All 53 Items.
Spicer Drivetrain Products rear axle shafts feature application-specific design and engineering, quality materials, precision manufacturing processes, and statistically-controlled testing. Through induction heat treating with a slower scan rate, Spicer delivers more consistent and stronger axle shafts. In addition, the cold-formed rolled spline eliminates the need for machining, which can cause stress fractures and premature failures. The Spicer Drivetrain rear axle shafts are available in a variety of styles, configurations, and options to fit your specific rear axle type.
( 51 )
$204.99
—
$292.99
Spicer Drivetrain Products axle shafts are manufactured to the same high standards as factory parts because they are original equipment. That means when an automotive axle is replaced with a genuine Spicer part, you're getting the same performance and reliability as when the vehicle rolled off the assembly line. Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products—so the replacement axle shaft you purchase today may even exceed the standards set for the original equipment part you're replacing. Order the model designed to fit your application.
( 89 )
$239.99
—
$240.99
Eaton Electronic ELocker stator and armature service kits include a stator, bearing race, thrust bearing and retaining ring. They work with your Eaton differential to produce smooth, quiet performance and great traction under loads. Order the replacement kit recommended for your vehicle and axle application.
( 3 )
$257.26
When off-road, encountering obstacles and hazards that could inflict expensive damage to your differential is inevitable. ARB differential covers are made from high-tensile strength nodular iron (tougher and harder than carbon steel); they are engineered to protect the differential and ring and pinion from off-road hazards. Available for a select line of differentials, they are offered in red or black powdercoated finishes. Features of ARB differential covers include: * Computer-optimized, cross brace design increases the structural rigidity of the entire axle * Helps keep the ring and pinion gears meshing on the flat faces of the teeth--greatly increasing ring and pinion life and overall strength * Top-quality, rare earth magnets on both the drain plug and dipstick collect metallic particles * Dipstick magnet allows the oil to be checked for tell-tale signs of internal damage * Prolonged carrier bearing life (especially on high-output vehicles) from improved support of bearing alignment * Approach/departure angles optimized by angled exterior surfaces that minimize hang-ups * Unique dipstick/filler cap design allows differential oil level to be adjusted for rotated differential housings * Low-profile drain plug resists damage from obstacles * High-strength cap screws (included) are recessed into the cover for impact protection
( 26 )
$209.95
An old race should never be re-used with a new bearing--no matter how good its condition may appear to the naked eye. Timken pinion bearing races feature premium design, enhanced surface finishes, and are manufactured using quality materials to ensure longer bearing life and excellent antifriction properties. They work as a team with your bearings to keep your gears in motion. Timken bearing races are available as direct-fit OE replacements or for custom applications. Choose pinion bearing races from Timken on your next automotive job. Features include: * Designed to effectively reduce friction * Ultimate load-handling capability * Built for long service life * Meet high performance standards
( 20 )
$8.99
—
$10.99
Yukon Gear & Axle pinion shims help seat your pinion gear properly. These steel inner and outer pinion shims assist you in setting up the right depth and preload for your application. If you need pinion shims, Yukon Gear & Axle offer quality and value.
( 19 )
$30.99
Yukon Gear & Axle 1541H alloy axles are part of their extensive line of general replacement and high performance axles for passenger car, truck, and SUV applications. They feature high-quality alloys and the latest in heat-treating technologies to provide strong axles for off-road, street, and track use. Direct-fit replacements are available for dozens of axle models associated with countless cars and trucks. Additional rear axle features include: * One-piece forged 1541H axles are 25 percent stronger than OE 1040/1050 axles * Full-floating axles available for select applications * Rolled splines provide 30 percent strength increase over cut splines * Larger spline upgrades available * 2-piece tapered axles available * Offered in many lengths * Wide variety of bolt patterns
( 156 )
$303.99
—
$346.99
Spicer Drivetrain Products differential cover bolts are available in a variety of steel bolts applications to fit Dana, Ford, GM, Chrysler, and many other differential covers. Order the bolts designed for your axle model application.
Not Yet Reviewed
$3.99
Do you need to install new crush sleeves? Motive Gear offers differential crush sleeves for controlled preload. You can depend on their steel collars to slip in between the bearings and keep the pressure on as you tighten down the pinion nut. If you're replacing a pinion seal or setting up your differential, use Motive Gear crush sleeves for preload control.
( 12 )
$3.99
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 283 )
$705.99
—
$903.99
Spicer Drivetrain Products axle bearing retainers service your Dana with peace of mind. These steel retainer assemblies include all four studs for an easier installation. Whether you're overhauling or replacing seals or broken bearings, be sure to update the axle bearing retainers for best performance.
Not Yet Reviewed
$9.99
Installing a new ring and pinion? Motive Gear will make things easier with these differential pinion shims. They're made of steel for the ultimate durability and will keep everything in line just as they should be. Motive Gear offers these differential pinion shims in a kit so you can customize the thickness to your car's individual needs. Order the set that corresponds with your axle model.
( 21 )
$10.99
Yukon Gear & Axle offers all of the small differential carrier replacement parts that you need to reassemble your carrier. Oil slingers, thrust washers, shims, baffles, guides, spacers, pins, bearing screw adjusters, and more are available to complete your differential carrier project. These components are available for numerous axle models, such as various GM, Ford, AMC, Dana, and Chrysler applications.
( 27 )
$9.99
Yukon Gear & Axle crush sleeve eliminator kits replace your crush sleeve with a shim and spacer setup. These kits offer an economical way to enhance your setup and make it more precise. Have you ever over-tightened a crush sleeve? You toss it and start over with a new one. Yukon Gear & Axle crush sleeve eliminator kits remove the hassle—so setting preload is easier. Order the kit designed for your axle model application.
( 67 )
$50.89
Off with the old and on with the new—Spicer Drivetrain Products differential pinion nuts are essential replacement hardware. When servicing differential components requires the existing pinion shaft nut to be removed, a new nut should always take its place. Spicer pinion nuts are flanged, leaving out the need for a separate pinon nut washer. They're available in different sizes for a variety of Dana and GM axle applications.
( 5 )
$1.99
Major components, such as the ring and pinion, play a starring role in your gear train's operation. However, they couldn't do their jobs properly without a supporting cast, including these differential crush sleeves from Yukon Gear & Axle. The durable steel collars prevent your pinion bearing from being preloaded too tightly—and help prevent the pinion nut from loosening. When the time comes to service your differential, choose Yukon Gear & Axle crush sleeves, available in configurations for dozens of specific axle applications.
( 11 )
$9.89
—
$41.99
Yukon Gear & Axle master overhaul kits are what you need for a successful differential rebuilding. All of the high-quality parts that you need are provided to do your job right. Yukon master kits go through extensive research to ensure a perfect fit and hassle-free install utilizing the best components, including Timken bearings and races! Choose from their huge selection of kits to meet your replacement application. Yukon Gear & Axle master overhaul kits may include: * Pinion bearings * Carrier bearings * Pinion seal * Crush sleeve or preload shims * Pinion depth shims * Carrier shims (varies by application) * Gear marking compound and brush * Pinion nut * Baffles and slingers (varies by application) * Gasket and/or silicone * Ring gear bolts (for application) * 20-page instruction manual
( 102 )
$450.99
—
$542.99
Make sure that the job is done right with National Bearing differential carrier bearings. You can trust National Bearing to supply you with bearings manufactured with technology-driven processes to the most stringent of thresholds and manufacturing tolerances. Look to National Bearing's differential bearings to provide you with the confidence that you need when completing your ring and pinion installations.
( 5 )
$16.99
What kind of hidden performance does your vehicle possess that's ready to be unleashed? Spicer Drivetrain Products differential carriers supply the power for you to find out! You can increase your off-road traction, maintain streetability, and get ready to rock and roll in your truck or Jeep with the selection of carriers offered by this legendary manufacturer. Spicer goes above and beyond so your rig can do the same! Order the model and options recommended for your vehicle.
( 43 )
$1,020.99
Motive Gear differential bearing kits contain everything you need to install your ring and pinion. Available for front or rear axles, the kits are offered for nearly three dozen differential case design applications. Includes: * Front and rear pinion bearing * Pinion seal * Carrier bearings * Pilot bearing (depending on application) * Gear marking compound * Crush sleeve * Pinion nut * Brush * Thread locking compound * Cover gasket or RTV
( 25 )
$130.99
—
$295.99
Yukon Gear & Axle Dura Grip positraction carriers offer great traction and strength, and yet are not overly aggressive for the streets. These nodular iron or steel replacements are 4-spring, Raybestos composite, clutch-style, limited-slip carriers—with internal gears machined from forged 4320 steel with stronger teeth. Assembled in the USA, the Yukon differential carriers are rebuildable, allowing for repairs or modifications without buying a new unit. They're available for fitment with nearly two dozen axle models. What are you using to transfer power? Choose smooth operation with strong lockup abilities to transfer torque—benchmarks of the Yukon Gear & Axle Dura Grip positraction carriers.
( 134 )
$1,219.99
Support your gears with National pinion bearings. They are precision-made from quality materials to keep your gear aligned and running smooth. Replace worn bearings with National Bearing anti-friction pinion bearings.
( 1 )
$11.99
Richmond Gear differential pinion shims are a must-have when overhauling an axle or replacing a ring and pinion set. Order the shims designed for fitment with your axle model. Richmond Gear has the differential service components you need at a great price.
Not Yet Reviewed
$12.99
Yukon Gear & Axle offers a full line of differential covers to suit your front or rear applications. These replacement covers protect your gears, keep lubricating fluid where it's needed—and on some styles, they offer added cooling and/or strength. Their large selection affords you options of materials, sizes, and finishes to get exactly what you need. Order the model recommended for your axle, differential case design, and engine specifications.
( 65 )
$176.99
—
$184.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
