Availability
On Sale
Do you need a bushing or spring? A bracket or retainer? Scott Drake clutch linkage components will help you to service your clutch—including the equalizer bar and related parts. Small components can be just as important as larger ones, and many of Scott Drake's clutch linkage components offer the correct original designs for a hassle-free fit. They're especially useful for 1960s and '70s era muscle car applications.
( 23 )
$24.93
$22.44
On Sale
JBA Performance Exhaust replacement Z-bars for classic Mustangs are specifically designed for use with JBA headers. There are multiple Z-bars from Ford and other reproduction companies found on the early Mustangs with most having adequate clearance for your new JBA headers. However, if your Z-bar is modified or worn and will interfere with your JBA headers, replace it with one from JBA. They are designed for perfect fit and movement and feature heavy-duty steel construction with a durable black wrinkle finish.
( 4 )
$239.25
$215.32
On Sale
RideTech Clutch Z-Bar brackets are available for those running a mechanical clutch with a Ridetech Performance subframe. They are only compatible with mechanical clutches being used with Ridetech 2nd Gen (1970-81) F-Body (Camaro/Firebird) performance subframe. Bracket and hardware are included.
Not Yet Reviewed
$30.00
$27.00
On Sale
RideTech 1959-64 Chevy air suspension systems are designed specifically for the Chevy "B" Body cars. These kits provide an ultra-low show stance while maintaining excellent ride quality and handling. Choose the air suspension system recommended for your year/model. Some kits may vary depending on your application. RideTech 1959-64 Chevy air suspension system features and notes: * Upper StrongArms (powdercoated black and fully assembled with ball joints, bushing, and cross shafts; ready for installation) * Lower StrongArms (powdercoated black and fully assembled with ball joints, bushing, and cross shafts; ready for installation) * Front HQ Series Shockwaves utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling (also allows fine-tuning of the ride quality and handling) * Front and rear MuscleBars help reduce body roll and create room for wider tires. PosiLink end links provide immediate engagement between the chassis and control arms. * Rear StrongArms provide added strength to help get the power to the pavement * Rear CoolRide and HQ Series shocks simply bolt in place of the stock springs. Important note: Control system is not included. To complete your air suspension system, a RideTech compressor system is recommended. * RideTech kit 11060298 upper arm and panhard bar utilize R-joint technology to provide smooth operation and reduce roll bind; must be used with stock spindles. Some cars have two rear upper control arms and will need an additional StrongArm. (1959-64 GM B-Body includes Impala, Bel Air, Biscayne, Brookwood, El Camino, Kingswood, Nomad, and Parkwood)
Not Yet Reviewed
$4,820.00
$4,338.00
On Sale
Artec Industries JK APEX front axle ultimate armor kits furnish everything you need to make your axle the strongest it can be. These packages include an APEX front axle truss, heavy-duty front LCA brackets, heavy-duty shock brackets, inner C-gussets, and APEX heavy-duty tracbar bracket. Armor kits are available for a variety of specific Jeep applications, in both stock and raised track bar height models. How is the ultimate armor kit better than the regular armor kit? This kit includes entire replacement LCA brackets and shock brackets, whereas the regular armor kit just adds a skid plate to the factory LCA brackets. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 7 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours to the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 37 in. tires on stock JK axles * Truss strengthens the weakest sections of the axle—under the coil perches, around the control arm brackets, and where the tube enters the casting * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift * Front LCA brackets, shock brackets, inner C-gussets, and HD tracbar brackets are made from 1/4 in. steel * Gussets and brackets strengthen or replace weak components of the axle that are prone to failure
Not Yet Reviewed
$406.99
—
$439.99
$305.24
—
$329.99
On Sale
RideTech 1958 Chevrolet air suspension systems are specifically designed for the 1958 Chevy B-body cars (including the Impala, Del Ray, Bel Air, Biscayne, Brookwood, and Nomad). They include everything needed to provide a lowered stance with dramatically improved handling and ride quality. These kits contain front upper and lower StrongArms, front and rear MuscleBars, plus front and rear HQ Series coilovers. Enjoy the benefits of buying a complete system that takes all of the guesswork out of your suspension upgrade. Features, items, and specs: * Must be used with 1959-64 stock spindles and disc brakes * Black powdercoated upper StrongArms feature corrected ball joint angles, and are fully assembled with ball joints, bushing, and cross shafts * Upper ball joints moved back to allow for additional caster setting (improves high speed stability and steering feel) * Black powdercoated lower StrongArms feature a double sheer lower mount for increased strength, and are fully assembled with ball joints, bushing, and cross shafts * HQ Series shocks allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001-mile warranty (rebound knob located on top of shock for underhood access) * CoolTide system using Firestone air springs * Front MuscleBar helps reduce body roll and creates room for wider front tires (includes PosiLink endlinks that provide immediate engagement between chassis and control arms) * Rear MuscleBar * Rear StrongArms provide added strength to help get the power to the pavement (includes a tubular upper wishbone specific to the 1958 model year)
Not Yet Reviewed
$4,680.00
$4,212.00
On Sale
USA Standard Gear driveshafts are high-quality, direct replacement units to repair your binding, bent, or rusty driveshaft. This critical component keeps the power flowing from transmission or transfer case to your differential. Order the model recommended for your vehicle and engine application. Features include: * 100 percent new components * Slip yokes and U-joints are lubricated with high-temperature grease * Fully assembled for simple out-of-the-box replacement * USA Standard "Perfect Fit" driveshafts are guaranteed for proper fitment and easy installation * Strengthened over common, OE-replacement shafts to prevent failure * Dynamically balanced to ensure smooth operation and long life
( 6 )
$600.99
$510.84
On Sale
Artec Industries JK APEX front axle armor kits strengthen and protect the weakest parts of your factory axle. These kits include an APEX front axle truss, front LCA skids, inner C-gussets, and APEX heavy-duty tracbar bracket. The packages are available for a variety of Jeep applications, both stock and raised track bar height. Order the model best suited for your vehicle. Product details: * Patent pending APEX truss peaked top design provides more rigidity than a flat top truss design * Truss is CNC precision laser-cut in-house from 1/8 in. mild steel for a lightweight yet strong solution—only 7 lbs. * Truss is CNC precision-bent in-house for a great fitment; literally drop the truss in place on the axle and it's ready to weld—no puzzle piece assembling * Designed using 3-D models directly from Dana Corp and Jeep for an amazing fit and clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * APEX design continues under the OEM coil buckets for complete end-to-end axle reinforcement—an industry first * Dimpled holes provide weight reduction, rigidity, and strength * Contours to the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * Provides worry-free wheeling of up to 37 in. tires on stock JK axles * Truss strengthens the weakest sections of the axle—under the coil perches, around the control arm brackets, and where the tube enters the casting * Low-profile design doesn't go over differential and allows usage in vehicles with only slight lift * Front LCA skids, inner C-gussets, and HD tracbar brackets are made from 1/4 in. steel * Skids, gussets, and brackets strengthen or replace weak components of the axle that are prone to failure
Not Yet Reviewed
$340.99
—
$362.99
$255.74
—
$272.24
On Sale
Hurst Blackjack shifters locate the shifter handle in the proper location for your application. The Blackjack housings are CNC-machined from billet 6061 aluminum, anodized with a tough black MIL-spec finish, and finally engraved with the Hurst logo in the top plate. Each setup includes a zinc-plated and hardened chromoly steel stick adapter, dual stick centering springs, hardened chromoly pivot pins, and a durable Delrin pivot ball for positive, quiet operation. The classic Hurst chrome flat bar stick and white shift ball for the specified application completes the Hurst Blackjack shifters.
( 20 )
$332.95
—
$749.95
$299.65
—
$412.95
On Sale
Scott Drake clutch linkage brackets allow the clutch equalizer bar to rotate front to back. These equalizer pivot mounts are made from the original Ford prints and are stamped from heavy-gauge steel for strength. They're available in different styles for fitment on nearly a hundred Ford and Mercury applications from the 1960s and '70s.
( 12 )
$70.15
$63.15
On Sale
If you are considering Ridetech's coilover suspension system for the back of your vehicle, don't let the rearend stop you! Currie 9 in. Ridetech housing and axle packages are available in stock axle width or narrowed for mini-tubs, and feature the stock pinion offset (drive shaft location) and wheel bolt pattern with Ridetech 4-link suspension and sway bar brackets installed for a straightforward, hassle-free installation. Features: * Currie Centurion high-strength 9 in. notchback housing with flush drain plug * Ridetech 4-link brackets installed * Available in stock or mini-tub widths * Currie Performance 31-spline axles with wheel studs installed * Tapered axle bearings and heavy-duty retainers
( 1 )
$1,750.00
$1,575.00
On Sale
To borrow a line from the candy bar commercial, sometimes you feel like a nut… And when that particular need arises, Yukon Gear & Axle pinion nut washers are a quality choice. Maybe your old pinion nut washer is corroded, too loose, or broken altogether—all good reasons for a Yukon replacement. They're machined to OEM specifications and made from quality materials for durability. Order the replacement washers recommended for your axle application.
( 6 )
$7.89
—
$29.99
$6.71
—
$25.49
On Sale
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These narrowed 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. The narrowed axle widths satisfy mini-tub applications. Ridetech narrowed housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
( 1 )
$1,975.00
—
$2,275.00
$1,777.50
—
$2,047.50
On Sale
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These stock 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. Ridetech stock housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
Not Yet Reviewed
$1,975.00
—
$2,275.00
$1,777.50
—
$2,047.50
On Sale
"Outside the box thinking with a fresh approach to design." Artec Industries APEX rear 1-ton axle swap brackets are advanced bracket systems designed for use on almost any axle with a 3.5 in. axle tube. This kit provides the factory link, track bar, spring, anti-sway bar, bump stop pads and shock locations all encompassed in an axle tube reinforcing truss system. This kit is great for Super Duty Sterling 10.5 or 10.25, AAM 10.5 14 bolt, or a Ford 9.0 in. or 10.0 in. axle with 3.5 in. axle tubes. Other axles may be used, provided they are wide enough to fit the upper control arm brackets and you have a plan for mounting the ABS sensors. Features and benefits: * Coil brackets and bump stop pads merged to form an axle tube truss, allowing easy installation of other brackets * CNC cut from 1/4 in. and 3/16 in. steel for high strength, precision, and CNC bent for a great fit * Includes upper and lower control arm mounts, shock mounts, anti-sway bar mounts, trackbar mount, bump stop pads, coil spring mounts, and all brackets necessary for a complete axle swap * Built-in axle tube truss is quicker to weld than individual brackets, saving hours of installation time * Track bar mount includes four locations to accommodate aftermarket lifts, stock height hole not included
Not Yet Reviewed
$439.99
—
$549.99
$329.99
—
$412.49
On Sale
Rekluse Clutch Radius CX clutch kits are the next evolution in auto clutch technology. They bring together all of Rekluse's latest technology into one package. TorqDrive friction disk technology coupled with EXP and their Core technology results in a significant advancement of performance with exceptional hook-up, lever feel, and durability. Just when you thought auto couldn't get better, RadiusCX has raised the bar. Features and benefits include: * Better starts, carry more speed, focus on the line and not on the clutch * Perfect power delivery every time * Maintain momentum; use the torque of your motor without worrying about stalling * Increased power transfer over OEM * Fully tunable to suit rider and/or terrain * Optimized pressure plate design provides our best lever feel; consistent control and behavior * Core components deliver improved oil flow and stability over wide temperature ranges * TorqDrive friction disks provide longer clutch life with less adjustment over time * Rekluse sleeves eliminate basket wear and notching
Not Yet Reviewed
$1,099.00
—
$1,299.00
$989.10
—
$1,169.10
On Sale
Continuing the line of Trail-Link kits is the Trail-Gear Trail-Link 3-link Series of Tacoma Solid Axle Swap (SAS) kits that are strong, user friendly, and affordable. They offer several different kits to allow you to pick the kit that is best suited and priced for your unique build. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners, for Tacoma owners, if you have any questions, you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Trail-Link Tacoma Solid Axle Swap SAS "C" kits: * Trail-Gear shock mount kit * Lower link mount--2 in. x .250 in. wall DOM tubing * Upper axle link bracket--1/4in. steel, formed and welded * Panhard brackets--3/16 in. thick * Driver-side front frame bracket--1/4in. steel, formed and welded * Passenger-side front frame bracket--1/4in. steel, formed and welded * Panhard bar--1.25 in. x .250 in. thick wall DOM material * Three RH and LH 1.25 in. Creeper Joints with bungs * Two rod ends with bungs * Misalignment spacers * Shock straps * Link * 3-hole gussets * Front frame reinforcement plates (with IFS box mount kit) * Steering shaft * Steering couplers * Firewall plate * Front extended brake line * Fully loaded calipers * Caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * Tacoma high-steer kit * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
$6,799.99
On Sale
Artec Industries JK2TJ front axle swap kits with truss are designed to take serious abuse and reinforce your entire axle while also providing the factory link, anti-sway bar, track bar, and shock locations. The 1/4 in. thick truss top incorporates a unique design to strengthen both the axle and incorporate the link brackets for ease of installation and added strength. By merging the link mounts into the truss, hours of work and trial-and-error can be avoided when compared to other bracket systems. Simply place the truss on the axle and all the other brackets fit into place exactly where they need to be. The JK front Dana 44 axle features a high-pinion differential, larger diameter ring gear than the Dana 30, larger disc brakes, and a wider WMS for lowered center of gravity. The JK2TJ front axle swap kits include all the brackets necessary, including lower control arm, shock, anti-sway bar, track bar, and coil spring mounts. Artec kits provide an overall low-profile design, meaning your axle will be stronger, sleeker, and easier to fit into any vehicle.
( 1 )
$659.99
$494.99
On Sale
Artec Industries 1-ton APEX front axle swap truss kits are heavy-duty truss and bracket systems for the Spidertrax 9 in. or Super Duty front 60 axles. They are designed for taking serious abuse and reinforcing the entire axle while also providing the factory link, spring, anti-sway bar, and shock locations. The 3/16 in. thick mild steel truss incorporates a unique peaked design to strengthen both the axle and incorporate the link brackets for ease of installation. By using the truss to align the link mounts, hours of work through trial and error can be avoided when compared to other bracket systems. Simply tack weld the truss on the axle, and all the other brackets fit into place exactly where they need to be. Artec APEX 1-ton front axle swap truss kits are offered with different upper control arm mounting styles. Choose the one you prefer, designed for your Jeep. Features and benefits: * Patent pending APEX truss peaked top design providing increased rigidity * In-house CNC precision laser-cut and bent from 1/4 in. mild steel for a great fit * Designed using 3-D models directly from Ford and Jeep for an amazing fit and clearance of surrounding components * 70 percent less welding needed, less chance of warping, and quick turnaround * Dimpled holes not only provide weight reduction but rigidity and strength * Truss extends under coil buckets all the way to inner C for end-to-end rigidity * Heavy-duty track bar bracket can slide to multiple positions for steering geometry fine tuning * Three UCA mount styles available: -- Single adjustable truss upper link mount for use with 2.63 in. wide joints in a 3-link style suspension -- Daystar bushings in factory location -- RockJock Johnny Joints in factory location
Not Yet Reviewed
$472.99
—
$703.99
$354.74
—
$527.99
On Sale
Artec Industries JK 1-ton BASICS rear axle swap truss kits are basic bracket systems which can be used on practically any axle with a 3.5 in. or similar axle tube. These kits provide the factory link, trackbar, spring, anti-sway bar, bump stop pads, and shock locations. Also included is a template for correctly spacing your brackets off the differential casting for AAM 10.5 in. 14-bolt axles and Sterling 10.5 in. axles found in Ford Super Duty trucks. When using other axles, just make sure they are wide enough to fit the upper control arm brackets and you have a plan for mounting the ABS sensors. Features and benefits: * Patent pending APEX truss peaked top design provides increased rigidity * APEX truss is CNC laser-cut from 3/16 in. thick steel and CNC bent for a precise fit * Brackets are in-house CNC laser-cut and bent from 1/4 in., 3/16 in. and 1/8 in. thick mild steel for precision, strength, and a great fit * Includes all brackets necessary for a complete axle swap including, upper and lower control arm mounts, shock mounts, anti-sway bar mounts, track bar mount, bump stop pads, and coil spring mounts * Coil brackets offset from differential casting using the include template * All other brackets line up to each other, no guessing and measuring involved * Track bar mount includes four locations for aftermarket lifts, stock height hole not included * Save hours of installation time
Not Yet Reviewed
$560.99
—
$582.99
$420.74
—
$437.24
On Sale
Bringing a whole new level of cost savings, strength, weight savings, and complete axle protection not seen in the industry, Artec Industries 1-ton APEX rear axle swap truss kits are advanced truss and bracket systems designed for the Spidertrax 9 in., Super Duty Sterling 10.5 or 10.25, or AAM 14 bolt 10.5 axles. Each kit provides the factory link, track bar, spring, anti-sway bar, bump stop pads, and shock locations all encompassed in an axle tube reinforcing truss system. A key feature that sets the APEX truss apart is the unique peaked shape top which provides extra rigidity to the whole truss while allowing both a reduction in weight and eliminating long weld seams. Without long seams to weld, you drop the truss directly on the axle and weld it to the axle faster. Features include: * Patent Pending APEX Truss peaked top design provides more rigidity * Precision CNC-cut and bent from 1/4 in. and 3/16 in. steel for high strength and precision * Designed using 3-D models directly from Ford and Jeep for an amazing fit * Dimpled holes provide not only weight reduction but rigidity and strength * Two-piece truss design for easy installation, smaller packaging, and lower shipping costs * Includes brackets, upper and lower control arm mounts, shock mounts, anti-sway bar mounts, track bar mount, bump stop pads, and coil spring mounts for a complete axle swap * Track bar mount includes several hole locations to accommodate aftermarket lifts, stock height hole not included
Not Yet Reviewed
$604.99
—
$659.99
$453.74
—
$494.99
On Sale
Artec Industries triangulated 8.8 in. axle trusses are perfect for an axle swap on the back of your Jeep. These heavy-duty trusses reinforce your entire axle and are made to take serious abuse. They're equipped with brackets to provide locations for the lower control arm, anti-sway bar, OEM coil, and shock locations, while triangulating the upper control arms, eliminating the need for a track bar. With a little welding, these beefy trusses and brackets are a breeze to mount on the rear axle. They are also available in a high-clearance option that raises the LCA and shock brackets above the bottom of the axle tube.
Not Yet Reviewed
$509.99
—
$539.99
$382.49
—
$404.99
On Sale
aFe Pro Series differential covers bring performance engineering to the protection of your axle's differentials. The durable cast aluminum construction with reinforced ribs provide maximum strength, while the machined fins and textured powdercoating provide a distinctive look. aFe Pro Series differential covers are available individually for front or rear with or without PRO Guard D2 synthetic 75W-90 oil and in complete sets with front, rear, and oil. Features: * Increased oil capacity * Internal/external ribs/fins transfer heat from oil to outside air for maximum cooling * Dual neodymium magnetic plugs--magnetic drain and deep reach fill plug—capture loose particles for maximum gear protection * Large oil level sight glass allows quick and easy oil inspection * Calibration plug set to the factory oil level to eliminate overfilling
( 20 )
$352.80
$317.52
On Sale
Lakewood safety bellhousings are designed for maximum performance and durability. They are cut on CNC 5 axis laser cutters rather than plasma cutters to improve finish quality, reduce heat damage and warpage from the plasma cutter, improve speed of manufacture, and make them all exactly the same. All bellhousings feature a scalloped plate on the bottom of the transmission surface made from G70 grade steel (70,000) psi which will help eliminate stripping the transmission bolts. The engine plates are made of H60 grade material and the bells are roto-brated after welding to relive any stresses created from the hydro forming, annealing, or welding process prior to machining and painting. The roto-brating process also closes the metal on the outer surface making them stronger. Ever wonder how the SFI tests bellhousings like these Lakewood safety bellhousings? First, they bolt the bellhousing to a machine with a cast iron flywheel and saw inside it. Then they spin the flywheel, causing the saw to cut through it until it explodes. If the bellhousing can contain the explosion, the bellhousing is approved. These safety bellhousings are a safeguard to minimize the destructive effects of such an explosion. Don't take unnecessary chances with your safety and the safety of innocent bystanders--Lakewood not only provides top-notch products, they also provide peace of mind.
( 47 )
$899.95
$808.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
